Patch set 1:Code-Review +1
1 comment:
File src/cpu/intel/fsp_model_406dx/model_406dx_init.c:
TM2 is at (1 << 13) , right ?
Yes, and BIT3 is Automatic Thermal Control Circuit Enable (R/W)
1 = Setting this bit enables the thermal
control circuit (TCC) portion of the
Intel Thermal Monitor feature. This
allows the processor to automatically
reduce power consumption in
response to TCC activation.
0 = Disabled (default).
Note: In some products clearing this bit
might be ignored in critical thermal
conditions, and TM1, TM2 and adaptive
thermal throttling will still be activated.
I suppose the comment could be updated
To view, visit change 31196. To unsubscribe, or for help writing mail filters, visit settings.