Matt DeVillier uploaded patch set #3 to this change.

View Change

mb/google/cyan: Adjust ACPI interrupt triggering for audio codecs

The jack detect GPIOs are initialized as dual edge-triggered GPIs,
and Linux doesn't care if they are set to ActiveLow, ActiveHigh, or
ActiveBoth -- a single interrupt is detected on jack insertion or
removal.

The Windows drivers on the other hand, will not function unless the
codec and LPE ACPI interrupts entries are set as in the Intel
Cherrytrail Tianocore platform reference code.

So adjust the ACPI interrupt triggers to make Windows happy, since
Linux doesn't care either way.

Test: boot Linux and Windows 10 on google/edgar, observe functional
audio output for both built-in speakers and headphones.

Change-Id: Ic1dd8ece610d761791c060ece2d0aa51addf97ad
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
---
M src/mainboard/google/cyan/acpi/codec_maxim.asl
M src/mainboard/google/cyan/acpi/codec_realtek.asl
2 files changed, 5 insertions(+), 5 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/89/24989/3

To view, visit change 24989. To unsubscribe, or for help writing mail filters, visit settings.