Matt DeVillier has uploaded this change for review.
mb/purism/librem_mini: Fix USB_OC mapping in devicetree
Correct USB over-current mappings in devicetree now that the
GPIO config has been fixed per schematics.
Change-Id: I564630231933c7c17a2c0a2a403fdcca9189b92e
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
---
M src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
1 file changed, 6 insertions(+), 6 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/22/47222/1
diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb b/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
index 267e408..c13ba1b 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
+++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
@@ -146,16 +146,16 @@
end
end
end
- register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left upper
- register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front left lower
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-A front left upper
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A front left lower
register "usb2_ports[2]" = "USB2_PORT_MID(OC2)" # Type-A rear upper
- register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right lower
- register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Type-A front right upper
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC1)" # Type-A front right lower
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC1)" # Type-A front right upper
register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC3)" # Type-C rear
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # m.2-2230/Bluetooth
register "usb2_ports[9]" = "USB2_PORT_MID(OC2)" # Type-A rear lower
- register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left upper
- register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A front left lower
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A front left upper
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-A front left lower
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" # Type-C rear
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear lower
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC2)" # Type-A rear upper
To view, visit change 47222. To unsubscribe, or for help writing mail filters, visit settings.