Tony Huang has uploaded this change for review.
mb/google/puff/var/dooly: Update GPIO table for project use
Override unused device
SD card reader, built-in LAN
ALC1015 speaker amplifier SPK_AMP_ON
Update touchscreen/lvds gpio pin
BUG=b:170273526
BRANCH=puff
TEST=Build and check DUT function status
Change-Id: Ife14adf59609870abe9f4ba1eabe2573cb6e92dd
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
---
M src/mainboard/google/hatch/variants/dooly/gpio.c
1 file changed, 57 insertions(+), 20 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/28/46128/1
diff --git a/src/mainboard/google/hatch/variants/dooly/gpio.c b/src/mainboard/google/hatch/variants/dooly/gpio.c
index 5a911fc..4406c06 100644
--- a/src/mainboard/google/hatch/variants/dooly/gpio.c
+++ b/src/mainboard/google/hatch/variants/dooly/gpio.c
@@ -5,38 +5,56 @@
#include <commonlib/helpers.h>
static const struct pad_config gpio_table[] = {
- /* A16 : SD_OC_ODL */
- PAD_CFG_GPI(GPP_A16, NONE, DEEP),
- /* A18 : LAN_PE_ISOLATE_ODL */
- PAD_CFG_GPO(GPP_A18, 1, DEEP),
+ /* A17 : SD_VDD1_PWR_EN */
+ PAD_NC(GPP_A17, NONE),
+ /* A18 : GPP_A18 */
+ PAD_NC(GPP_A18, NONE),
+ /* A19 : GPP_A19 */
+ PAD_NC(GPP_A19, NONE),
+ /* A20 : TOUCH_INT_ODL */
+ PAD_CFG_GPI_APIC(GPP_A20, NONE, PLTRST, LEVEL, NONE),
+ /* A21 : FPMCU_PCH_BOOT0 */
+ PAD_NC(GPP_A21, NONE),
+ /* A22 : FPMCU_PCH_INT_L */
+ PAD_NC(GPP_A22, NONE),
/* A23 : M2_WLAN_INT_ODL */
PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT),
- /* B5 : LAN_CLKREQ_ODL */
- PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
-
/* C0 : SMBCLK */
PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
/* C1 : SMBDATA */
PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
+ /* C3 : GPP_C3 */
+ PAD_NC(GPP_C3, NONE),
+ /* C4 : GPP_C4 */
+ PAD_NC(GPP_C4, NONE),
/* C6: M2_WLAN_WAKE_ODL */
PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE),
/* C7 : LAN_WAKE_ODL */
- PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE),
- /* C10 : PCH_PCON_RST_ODL */
- PAD_CFG_GPO(GPP_C10, 1, DEEP),
- /* C11 : PCH_PCON_PDB_ODL */
- PAD_CFG_GPO(GPP_C11, 1, DEEP),
+ PAD_NC(GPP_C7, NONE),
+ /* C11 : GPP_C11 */
+ PAD_NC(GPP_C11, NONE),
/* C15 : WLAN_OFF_L */
PAD_CFG_GPO(GPP_C15, 1, DEEP),
+ /* C18 : GPP_C18 */
+ PAD_NC(GPP_C18, NONE),
+ /* C19 : GPP_C19 */
+ PAD_NC(GPP_C19, NONE),
+
+ /* D16 : DMIC_ON_OFF MIC_SWITCH_L */
+ PAD_CFG_GPI(GPP_D16, NONE, DEEP),
/* E2 : EN_PP_MST_OD */
PAD_CFG_GPO(GPP_E2, 1, DEEP),
- /* E9 : USB_A0_OC_ODL */
- PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
- /* E10 : USB_A1_OC_ODL */
- PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
+ /* F0 : GPP_F0 */
+ PAD_NC(GPP_F0, NONE),
+ /* F1 : GPP_F1 */
+ PAD_NC(GPP_F1, NONE),
+ /* F8 : GPP_F8 */
+ PAD_NC(GPP_F8, NONE),
+ /* F9 : GPP_F9 */
+ PAD_NC(GPP_F9, NONE),
/* F11 : EMMC_CMD */
PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
/* F12 : EMMC_DATA0 */
@@ -62,12 +80,31 @@
/* F22 : EMMC_RST_L */
PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
- /* H4: PCH_I2C_PCON_SDA */
+ /* G0 : SD_CMD */
+ PAD_NC(GPP_G0, NONE),
+ /* G1 : SD_DATA0 */
+ PAD_NC(GPP_G1, NONE),
+ /* G2 : SD_DATA1 */
+ PAD_NC(GPP_G2, NONE),
+ /* G3 : SD_DATA2 */
+ PAD_NC(GPP_G3, NONE),
+ /* G4 : SD_DATA3 */
+ PAD_NC(GPP_G4, NONE),
+ /* G5 : SD_CD */
+ PAD_NC(GPP_G5, NONE),
+ /* G6 : SD_CLK */
+ PAD_NC(GPP_G6, NONE),
+
+ /* H3 : SPK_AMP_ON */
+ PAD_CFG_GPO(GPP_H3, 1, DEEP),
+ /* H4: LVDS_SDA */
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
- /* H5: PCH_I2C_PCON_SCL */
+ /* H5: LVDS_SDL */
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
- /* H22 : PWM_PP3300_BIOZZER */
- PAD_CFG_GPO(GPP_H22, 0, DEEP),
+ /* H6 : PCH_I2C_TOUCH_SDA */
+ PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
+ /* H7 : PCH_I2C_TOUCH_SDL */
+ PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
};
const struct pad_config *override_gpio_table(size_t *num)
To view, visit change 46128. To unsubscribe, or for help writing mail filters, visit settings.