1 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.


mb/purism/librem_cnl: Set edk2 boot timeout for Librem Mini

As with other devices with only an external display, the Librem mini/
mini-v2 need a few extra seconds (vs an internal panel) for display init in order for the edk2 boot splash to be visible before the
default boot target is booted.

TEST=build/boot Librem Mini v2 w/edk2 payload, verify splash screen
shown / user has time to enter setup menu.

Change-Id: I9d2d514719a9918ee58cc63969b3adae44ac1632
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
---
M src/mainboard/purism/librem_cnl/Kconfig
1 file changed, 4 insertions(+), 0 deletions(-)

diff --git a/src/mainboard/purism/librem_cnl/Kconfig b/src/mainboard/purism/librem_cnl/Kconfig
index f75f316..1628ec6 100644
--- a/src/mainboard/purism/librem_cnl/Kconfig
+++ b/src/mainboard/purism/librem_cnl/Kconfig
@@ -112,3 +112,7 @@
 	  U81 on the bottom of the board near the front edge; the IC is not
 	  populated.  TX is pin 14, RX is pin 19.  The signals are 3.3V (do NOT
 	  connect directly to an RS-232 serial port).
+
+config EDK2_BOOT_TIMEOUT
+	int
+	default 4 if BOARD_PURISM_LIBREM_MINI || BOARD_PURISM_LIBREM_MINI_V2

