Arthur Heymans has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/51149 )
Change subject: mb/intel/d510: Fix spaces to tabs ......................................................................
mb/intel/d510: Fix spaces to tabs
This is a cosmetic change. Make the formatting consistent with the rest of the tree.
Change-Id: Ic90e5584938592f1c2ab41edfcc773702822070d Signed-off-by: Arthur Heymans arthur@aheymans.xyz --- M src/mainboard/intel/d510mo/devicetree.cb 1 file changed, 94 insertions(+), 94 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/51149/1
diff --git a/src/mainboard/intel/d510mo/devicetree.cb b/src/mainboard/intel/d510mo/devicetree.cb index 7486f7e..22e67e7 100644 --- a/src/mainboard/intel/d510mo/devicetree.cb +++ b/src/mainboard/intel/d510mo/devicetree.cb @@ -1,100 +1,100 @@ # SPDX-License-Identifier: GPL-2.0-or-later
chip northbridge/intel/pineview # Northbridge - register "gfx.use_spread_spectrum_clock" = "0" - register "use_crt" = "1" - register "use_lvds" = "0" + register "gfx.use_spread_spectrum_clock" = "0" + register "use_crt" = "1" + register "use_lvds" = "0"
- device cpu_cluster 0 on # APIC cluster - chip cpu/intel/socket_FCBGA559 # CPU - device lapic 0 on end # APIC - end - end - device domain 0 on # PCI domain - device pci 0.0 on end # Host Bridge - device pci 1.0 off end # PEG - device pci 2.0 on end # Integrated graphics controller - device pci 2.1 on end # Integrated graphics controller 2 - chip southbridge/intel/i82801gx # Southbridge - register "pirqa_routing" = "0x0b" - register "pirqb_routing" = "0x0b" - register "pirqc_routing" = "0x0b" - register "pirqd_routing" = "0x0b" - register "pirqe_routing" = "0x0b" - register "pirqf_routing" = "0x0b" - register "pirqg_routing" = "0x0b" - register "pirqh_routing" = "0x0b" - register "sata_ports_implemented" = "0x3" - register "gpe0_en" = "0x20000040" + device cpu_cluster 0 on # APIC cluster + chip cpu/intel/socket_FCBGA559 # CPU + device lapic 0 on end # APIC + end + end + device domain 0 on # PCI domain + device pci 0.0 on end # Host Bridge + device pci 1.0 off end # PEG + device pci 2.0 on end # Integrated graphics controller + device pci 2.1 on end # Integrated graphics controller 2 + chip southbridge/intel/i82801gx # Southbridge + register "pirqa_routing" = "0x0b" + register "pirqb_routing" = "0x0b" + register "pirqc_routing" = "0x0b" + register "pirqd_routing" = "0x0b" + register "pirqe_routing" = "0x0b" + register "pirqf_routing" = "0x0b" + register "pirqg_routing" = "0x0b" + register "pirqh_routing" = "0x0b" + register "sata_ports_implemented" = "0x3" + register "gpe0_en" = "0x20000040"
- device pci 1b.0 on end # Audio - device pci 1c.0 on # PCIe 1 - device pci 0.0 on end # NIC - end - device pci 1c.1 on end # PCIe 2 - device pci 1c.2 on end # PCIe 3 - device pci 1c.3 on end # PCIe 4 - device pci 1d.0 on end # USB - device pci 1d.1 on end # USB - device pci 1d.2 on end # USB - device pci 1d.3 on end # USB - device pci 1d.7 on end # USB - device pci 1e.0 on end # PCI bridge - #device pci 1e.2 off end # AC'97 Audio (not on nm10?) - #device pci 1e.3 off end # AC'97 Modem (not on nm10?) - device pci 1f.0 on # ISA bridge - chip superio/winbond/w83627thg # Super I/O - device pnp 4e.0 off end # Floppy - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 4 - end - device pnp 4e.2 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # COM2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - irq 0xf1 = 0 - end - device pnp 4e.5 on # PS/2 keyboard / mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard interrupt - irq 0x72 = 12 # PS/2 mouse interrupt - irq 0xf0 = 0x80 - end - device pnp 4e.6 off end - device pnp 4e.7 off end - device pnp 4e.8 off end - device pnp 4e.9 off end - device pnp 4e.a off end # ACPI - device pnp 4e.b on # HWM - io 0x60 = 0x290 - irq 0x70 = 0 - end - end - end - device pci 1f.1 off end # PATA - device pci 1f.2 on end # SATA - device pci 1f.3 on # SMbus - chip drivers/i2c/ck505 # ICS9EPRS525 - register "mask" = "{ 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, - 0xff }" - register "regs" = "{ 0x61, 0xd9, 0xfe, 0xff, - 0xff, 0x00, 0x00, 0x01, - 0x03, 0x25, 0x83, 0x17, - 0x0d }" - device i2c 69 on end - end - end - device pci 1f.4 off end - device pci 1f.5 off end - device pci 1f.6 off end - end - end + device pci 1b.0 on end # Audio + device pci 1c.0 on # PCIe 1 + device pci 0.0 on end # NIC + end + device pci 1c.1 on end # PCIe 2 + device pci 1c.2 on end # PCIe 3 + device pci 1c.3 on end # PCIe 4 + device pci 1d.0 on end # USB + device pci 1d.1 on end # USB + device pci 1d.2 on end # USB + device pci 1d.3 on end # USB + device pci 1d.7 on end # USB + device pci 1e.0 on end # PCI bridge + #device pci 1e.2 off end # AC'97 Audio (not on nm10?) + #device pci 1e.3 off end # AC'97 Modem (not on nm10?) + device pci 1f.0 on # ISA bridge + chip superio/winbond/w83627thg # Super I/O + device pnp 4e.0 off end # Floppy + device pnp 4e.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + drq 0x74 = 4 + end + device pnp 4e.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + irq 0xf1 = 0 + end + device pnp 4e.5 on # PS/2 keyboard / mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + irq 0xf0 = 0x80 + end + device pnp 4e.6 off end + device pnp 4e.7 off end + device pnp 4e.8 off end + device pnp 4e.9 off end + device pnp 4e.a off end # ACPI + device pnp 4e.b on # HWM + io 0x60 = 0x290 + irq 0x70 = 0 + end + end + end + device pci 1f.1 off end # PATA + device pci 1f.2 on end # SATA + device pci 1f.3 on # SMbus + chip drivers/i2c/ck505 # ICS9EPRS525 + register "mask" = "{ 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, + 0xff }" + register "regs" = "{ 0x61, 0xd9, 0xfe, 0xff, + 0xff, 0x00, 0x00, 0x01, + 0x03, 0x25, 0x83, 0x17, + 0x0d }" + device i2c 69 on end + end + end + device pci 1f.4 off end + device pci 1f.5 off end + device pci 1f.6 off end + end + end end