Nick Vaccaro has uploaded this change for review.

View Change

mb/google/volteer: set GPP_B11 to be GPI

Set the EC_WP_OD GPIO to be GPI.

BUG=b:152876091
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer to kernel, then verify the following :
  cr50 console$ wp disable
  EC console$ gpioget EC_WP_L:1
  servo$ dut-control fw_wp: fw_wp:off
  Probe PCH_WP_OD at R189: 0V
  crossystem wpsw_cur: 0

  cr50 console$ wp enable
  EC console$ gpioget EC_WP_L: 0
  servo$ dut-control fw_wp: fw_wp:on
  Probe PCH_WP_OD at R189: 3.18V
  crossystem wpsw_cur: 1

Change-Id: Ibeb8a0a9bad35b3682143b983e9dbd727fa0c189
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
---
M src/mainboard/google/volteer/variants/baseboard/gpio.c
1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/07/40107/1

diff --git a/src/mainboard/google/volteer/variants/baseboard/gpio.c b/src/mainboard/google/volteer/variants/baseboard/gpio.c
index fff0381..c143540 100644
--- a/src/mainboard/google/volteer/variants/baseboard/gpio.c
+++ b/src/mainboard/google/volteer/variants/baseboard/gpio.c
@@ -78,7 +78,7 @@
 	/* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */
 	PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
 	/* B11 : PMCALERT# ==> PCH_WP_OD */
-	PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
+	PAD_CFG_GPI(GPP_B11, NONE, DEEP),
 	/* B12 : SLP_S0# ==> SLP_S0_L */
 	PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
 	/* B13 : PLTRST# ==> PLT_RST_L */
@@ -410,7 +410,7 @@
 	PAD_CFG_GPI(GPP_A17, NONE, DEEP),
 
 	/* B11 : PMCALERT# ==> PCH_WP_OD */
-	PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
+	PAD_CFG_GPI(GPP_B11, NONE, DEEP),
 
 	/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
 	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),

To view, visit change 40107. To unsubscribe, or for help writing mail filters, visit settings.