4 comments:
File src/mainboard/google/butterfly/devicetree.cb:
Patch Set #11, Line 23: register "spd_addresses" = "{ 0xA0, 0x00,0xA4,0x00 }"
Could this be reused with the native raminit?
Yes
Do we need this many tabs?
probably not
register "usb_port_config" = "{
/* enabled usb oc pin length */
{ 1, 0, 0x0040 }, /* P0: Right USB 3.0 #1 (no OC) */
{ 1, 0, 0x0040 }, /* P1: Right USB 3.0 #2 (no OC) */
{ 1, 0, 0x0040 }, /* P2: Camera (no OC) */
{ 0, 0, 0x0000 }, /* P3: Empty */
{ 0, 0, 0x0000 }, /* P4: Empty */
{ 0, 0, 0x0000 }, /* P5: Empty */
{ 0, 0, 0x0000 }, /* P6: Empty */
{ 0, 0, 0x0000 }, /* P7: Empty */
{ 0, 4, 0x0000 }, /* P8: Empty */
{ 1, 4, 0x0080 }, /* P9: Left USB 1 (no OC) */
{ 1, 4, 0x0040 }, /* P10: Mini PCIe - WLAN / BT (no OC) */
{ 0, 4, 0x0000 }, /* P11: Empty */
{ 0, 4, 0x0000 }, /* P12: Empty */
{ 0, 4, 0x0000 }, /* P13: Empty */
}"
Couldn't this be generated from the native USB port settings? Two thirds of these values are exactly […]
no. the future plan is to remove all native USB port settings and only use deviceteee values.
File src/mainboard/intel/dcp847ske/usb.h:
This file is an attempt to unify USB configs. […]
the idea is to have only devicetree settings
To view, visit change 32070. To unsubscribe, or for help writing mail filters, visit settings.