Attention is currently required from: Jamie Ryu.
Jamie Ryu uploaded patch set #27 to the change originally created by Varshit B Pandya.
soc/intel/common/basecode: Configure top swap based on ucode version
In case of FIT based FW update feature is enabled, check that the
microcode has been loaded via FIT, if not, then disable top-swap so
that RO microcode is loaded on the next boot.
This is to make sure that the system always boots up with a microcode
loaded via FIT.
Change-Id: I0ed2ca9e350acf0385ce5d790d319235df6c9f21
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
---
M src/soc/intel/common/basecode/fw_update/Makefile.inc
A src/soc/intel/common/basecode/fw_update/ucode_load_check.c
A src/soc/intel/common/basecode/include/intelbasecode/ucode_update.h
3 files changed, 35 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/34656/27
To view, visit change 34656. To unsubscribe, or for help writing mail filters, visit settings.