Balázs Vinarz has uploaded this change for review.
Adding Asus A88XM-E FM2+ motherboard with documentation
Signed-off-by: Balazs Vinarz <vinibali1@gmail.com>
Change-Id: I60fa0636ba41f5f1a6a3faa2764bf2f0a968cf90
---
A Documentation/mainboard/asus/a88xm-e.md
A src/mainboard/asus/a88xm-e/BiosCallOuts.c
A src/mainboard/asus/a88xm-e/Kconfig
A src/mainboard/asus/a88xm-e/Kconfig.name
A src/mainboard/asus/a88xm-e/Makefile.inc
A src/mainboard/asus/a88xm-e/OemCustomize.c
A src/mainboard/asus/a88xm-e/OptionsIds.h
A src/mainboard/asus/a88xm-e/acpi/cpstate.asl
A src/mainboard/asus/a88xm-e/acpi/gpe.asl
A src/mainboard/asus/a88xm-e/acpi/mainboard.asl
A src/mainboard/asus/a88xm-e/acpi/routing.asl
A src/mainboard/asus/a88xm-e/acpi/sata.asl
A src/mainboard/asus/a88xm-e/acpi/si.asl
A src/mainboard/asus/a88xm-e/acpi/sleep.asl
A src/mainboard/asus/a88xm-e/acpi/superio.asl
A src/mainboard/asus/a88xm-e/acpi/thermal.asl
A src/mainboard/asus/a88xm-e/acpi/usb_oc.asl
A src/mainboard/asus/a88xm-e/acpi_tables.c
A src/mainboard/asus/a88xm-e/board_info.txt
A src/mainboard/asus/a88xm-e/buildOpts.c
A src/mainboard/asus/a88xm-e/cmos.layout
A src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb
A src/mainboard/asus/a88xm-e/dsdt.asl
A src/mainboard/asus/a88xm-e/irq_tables.c
A src/mainboard/asus/a88xm-e/mainboard.c
A src/mainboard/asus/a88xm-e/mptable.c
A src/mainboard/asus/a88xm-e/romstage.c
27 files changed, 2,371 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/87/30987/1
diff --git a/Documentation/mainboard/asus/a88xm-e.md b/Documentation/mainboard/asus/a88xm-e.md
new file mode 100644
index 0000000..5f50c5a
--- /dev/null
+++ b/Documentation/mainboard/asus/a88xm-e.md
@@ -0,0 +1,131 @@
+# ASUS A88XM-E
+
+This page describes how to run coreboot on the [ASUS A88XM-E].
+
+## Technology
+
+Both "Trinity" and "Richland" FM2 desktop processing units are working,
+the CPU architecture in these CPUs/APUs are [Piledriver],
+and their GPU is [TeraScale 3] (VLIW4-based).
+
+Kaveri is non-working at the moment (FM2+),
+the CPU architecture in these CPUs/APUs are [Steamroller],
+and their GPU is [Sea Islands] (GCN2-based).
+
+```eval_rst
++------------------+--------------------------------------------------+
+| A88XM-E | |
++------------------+--------------------------------------------------+
+| DDR voltage IC | Nuvoton 3101S |
++------------------+--------------------------------------------------+
+| Network | Realtek RTL8111G - Not working |
++------------------+--------------------------------------------------+
+| Northbridge | Integrated into CPU with IMC and GPU (APUs only) |
++------------------+--------------------------------------------------+
+| Southbridge | Bolton-D4 |
++------------------+--------------------------------------------------+
+| Sound IC | Realtek ALC887 |
++------------------+--------------------------------------------------+
+| Super I/O | ITE 8603E |
++------------------+--------------------------------------------------+
+| VRM controller | DIGI VRM ASP1206 |
++------------------+--------------------------------------------------+
+```
+
+## Flashing coreboot
+
+```eval_rst
++---------------------+------------+
+| Type | Value |
++=====================+============+
+| Socketed flash | yes |
++---------------------+------------+
+| Model | [GD25Q64] |
++---------------------+------------+
+| Size | 8 MiB |
++---------------------+------------+
+| Package | DIP-8 |
++---------------------+------------+
+| Write protection | yes |
++---------------------+------------+
+| Dual BIOS feature | no |
++---------------------+------------+
+| Internal flashing | yes |
++---------------------+------------+
+```
+
+### Internal programming
+
+The main SPI flash can be accessed using [flashrom], if the
+AmdSpiRomProtect modules have been deleted in the factory image previously.
+
+## Integrated graphics
+
+### Retrieve the VGA optionrom from the vendor EFI binary by running:
+
+ # dd if=/dev/mem of=vgabios.bin bs=1k count=64 skip=768
+
+This version is usable for all the GPUs.
+1002,9901 Trinity (Radeon HD 7660D)
+1002,9904 Trinity (Radeon HD 7560D)
+1002,990c Richland (Radeon HD 8670D)
+1002,990e Richland (Radeon HD 8570D)
+1002,9991 Trinity (Radeon HD 7540D)
+1002,9993 Trinity (Radeon HD 7480D)
+1002,9996 Richland (Radeon HD 8470D)
+1002,9998 Richland (Radeon HD 8370D)
+1002,999d Richland (Radeon HD 8550D)
+1002,130f Kaveri (Radeon R7)
+
+## Known issues
+
+- AHCI hot-plug
+- Integrated ethernet
+- S3 resume
+- XHCI
+
+### XHCI ports can broke after using any of the blobs, restarting the
+board with factory image makes it work again as fallback.
+Tested even with/without the Bolton and Hudson blobs.
+
+## Untested
+
+- audio over HDMI
+- IOMMU
+- PS/2 mouse
+
+## TODOs
+
+- one ATOMBIOS module for all the integrated GPUs
+- manage to work with Kaveri/Godavary (missing PSP firmware?)
+
+## Working
+
+- ACPI
+- CPU frequency scaling
+- flashrom under coreboot
+- Hardware monitoring
+- Integrated graphics
+- Keyboard
+- KVM virtualization
+- Onboard audio
+- PCI
+- PCIe
+- PS/2 keyboard (during payload, bootloader)
+- SATA
+- Serial port
+- SuperIO based fan control
+- USB (disabling XHCI controller makes to work as fallback USB2.0 ports)
+
+## Extra resources
+
+- [Board manual]
+
+[ASUS A88XM-E]: https://www.asus.com/Motherboards/A88XME/
+[Board manual]: https://dlcdnets.asus.com/pub/ASUS/mb/SocketFM2/A88XM-E/E9125_A88XM-E.pdf
+[flashrom]: https://flashrom.org/Flashrom
+[GD25Q64]: http://www.elm-tech.com/ja/products/spi-flash-memory/gd25q64/gd25q64.pdf
+[Piledriver]: https://en.wikipedia.org/wiki/Piledriver_%28microarchitecture%29#APU_lines
+[Sea Islands]: https://en.wikipedia.org/wiki/Graphics_Core_Next#GCN_2nd_generation
+[Steamroller]: https://en.wikipedia.org/wiki/Steamroller_(microarchitecture)
+[TeraScale 3]: https://en.wikipedia.org/wiki/TeraScale_%28microarchitecture%29#TeraScale_3
diff --git a/src/mainboard/asus/a88xm-e/BiosCallOuts.c b/src/mainboard/asus/a88xm-e/BiosCallOuts.c
new file mode 100644
index 0000000..56c1753
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/BiosCallOuts.c
@@ -0,0 +1,98 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <AGESA.h>
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include <northbridge/amd/agesa/state_machine.h>
+
+#include <vendorcode/amd/agesa/f15tn/Proc/Fch/FchPlatform.h>
+#include <stdlib.h>
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * ASUS A88XM-E board ALC887-VD Verb Table
+ *
+ * Copied from `/sys/class/sound/hwC1D0/init_pin_configs` when running
+ * the vendor BIOS.
+ */
+#if !IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E)
+const CODEC_ENTRY a88xm_e_alc887_VerbTbl[] = {
+ {0x11, 0x90460130},
+ {0x12, 0x40330000},
+ {0x14, 0x01014010},
+ {0x15, 0x411111f0},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x01a19040},
+ {0x19, 0x02a19050},
+ {0x1a, 0x0181304f},
+ {0x1b, 0x02214020},
+ {0x1c, 0x411111f0},
+ {0x1d, 0x4044c601},
+ {0x1e, 0x411111f0},
+ {0x1f, 0x411111f0}
+ };
+#else
+const CODEC_ENTRY a88xm_e_alc887_VerbTbl[] = {
+ {0x11, 0x90460130},
+ {0x12, 0x40330000},
+ {0x14, 0x01014010},
+ {0x15, 0x411111f0},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x01a19040},
+ {0x19, 0x02a19050},
+ {0x1a, 0x0181304f},
+ {0x1b, 0x02214020},
+ {0x1c, 0x411111f0},
+ {0x1d, 0x4044c601},
+ {0x1e, 0x411111f0},
+ {0x1f, 0x411111f0}
+};
+#endif
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0887, (CODEC_ENTRY*)&a88xm_e_alc887_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
+{
+ FchParams_reset->LegacyFree = IS_ENABLED(CONFIG_HUDSON_LEGACY_FREE);
+}
+
+void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
+{
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+
+ /* Fan Control */
+ FchParams_env->Imc.ImcEnable = FALSE;
+ FchParams_env->Hwm.HwMonitorEnable = FALSE;
+ FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
+}
diff --git a/src/mainboard/asus/a88xm-e/Kconfig b/src/mainboard/asus/a88xm-e/Kconfig
new file mode 100644
index 0000000..70be2f1
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/Kconfig
@@ -0,0 +1,117 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+if BOARD_ASUS_A88XM_E
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select CPU_AMD_AGESA_FAMILY15_TN
+ select NORTHBRIDGE_AMD_AGESA_FAMILY15_TN
+ select SOUTHBRIDGE_AMD_AGESA_HUDSON
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select SUPERIO_ITE_IT8728F
+ select BOARD_ROMSIZE_KB_8192
+ select GFXUMA
+
+choice
+ prompt "DDR3 memory voltage"
+ default BOARD_ASUS_A88XM_E_DDR3_VOLT_150
+
+config BOARD_ASUS_A88XM_E_DDR3_VOLT_135
+ bool "1.35V"
+ help
+ Set DRR3 memory voltage to 1.35V
+config BOARD_ASUS_A88XM_E_DDR3_VOLT_150
+ bool "1.50V"
+ help
+ Set DRR3 memory voltage to 1.50V
+config BOARD_ASUS_A88XM_E_DDR3_VOLT_165
+ bool "1.65V"
+ help
+ Set DRR3 memory voltage to 1.65V
+endchoice
+
+config BOARD_ASUS_A88XM_E_DDR3_VOLT_VAL
+ hex
+ default 0x9e if BOARD_ASUS_A88XM_E_DDR3_VOLT_135
+ default 0x0 if BOARD_ASUS_A88XM_E_DDR3_VOLT_150
+ default 0x1e if BOARD_ASUS_A88XM_E_DDR3_VOLT_165
+
+config MAINBOARD_DIR
+ string
+ default asus/a88xm-e
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "A88XM-E" if BOARD_ASUS_A88XM_E
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 4
+
+config HUDSON_XHCI_FWM
+ bool
+ default n
+
+config HUDSON_IMC_FWM
+ bool
+ default n
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config VGA_BIOS_ID
+ string
+ default "1002,990e"
+
+config CONFIG_DRIVERS_PS2_KEYBOARD
+ bool
+ default y
+
+config CONFIG_HUDSON_XHCI_ENABLE
+ bool
+ default n
+
+config HUDSON_LEGACY_FREE
+ bool
+ default n
+
+config POST_IO
+ bool
+ default n
+
+config CONFIG_POST_DEVICE_PCI_PCIE
+ bool
+ default y
+
+config DEVICETREE
+ string
+ default "devicetree_a88xm-e.cb"
+
+endif # BOARD_ASUS_A88XM_E
diff --git a/src/mainboard/asus/a88xm-e/Kconfig.name b/src/mainboard/asus/a88xm-e/Kconfig.name
new file mode 100644
index 0000000..492d610
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ASUS_A88XM_E
+ bool "A88XM-E"
diff --git a/src/mainboard/asus/a88xm-e/Makefile.inc b/src/mainboard/asus/a88xm-e/Makefile.inc
new file mode 100644
index 0000000..f8895fa
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/Makefile.inc
@@ -0,0 +1,22 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+romstage-y += buildOpts.c
+romstage-y += BiosCallOuts.c
+romstage-y += OemCustomize.c
+
+ramstage-y += buildOpts.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += OemCustomize.c
diff --git a/src/mainboard/asus/a88xm-e/OemCustomize.c b/src/mainboard/asus/a88xm-e/OemCustomize.c
new file mode 100644
index 0000000..4c4c5bf
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/OemCustomize.c
@@ -0,0 +1,177 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <Porting.h>
+#include <AGESA.h>
+
+#include <northbridge/amd/agesa/state_machine.h>
+#include <PlatformMemoryConfiguration.h>
+
+/*
+ * Lane ID Mapping (from Fam15h BKDG: Table 45: Lane Id Mapping)
+ *
+ * Lane Id
+ * 0 P_UMI_[T,R]X[P,N]0 - southbridge link, connect via dev 8
+ * 1 P_UMI_[T,R]X[P,N]1 - southbridge link, connect via dev 8
+ * 2 P_UMI_[T,R]X[P,N]2 - southbridge link, connect via dev 8
+ * 3 P_UMI_[T,R]X[P,N]3 - southbridge link, connect via dev 8
+ * 4 P_GPP_[T,R]X[P,N]0 - may connect to PCI dev 4 - 7
+ * 5 P_GPP_[T,R]X[P,N]1 - may connect to PCI dev 4 - 7
+ * 6 P_GPP_[T,R]X[P,N]2 - may connect to PCI dev 4 - 7
+ * 7 P_GPP_[T,R]X[P,N]3 - may connect to PCI dev 4 - 7
+ * 8 P_GFX_[T,R]X[P,N]0 - may be used to form GFX slot or DDI
+ * 9 P_GFX_[T,R]X[P,N]1 - may be used to form GFX slot or DDI
+ * 10 P_GFX_[T,R]X[P,N]2 - may be used to form GFX slot or DDI
+ * 11 P_GFX_[T,R]X[P,N]3 - may be used to form GFX slot or DDI
+ * 12 P_GFX_[T,R]X[P,N]4 - may be used to form GFX slot or DDI
+ * 13 P_GFX_[T,R]X[P,N]5 - may be used to form GFX slot or DDI
+ * 14 P_GFX_[T,R]X[P,N]6 - may be used to form GFX slot or DDI
+ * 15 P_GFX_[T,R]X[P,N]7 - may be used to form GFX slot or DDI
+ * 16 P_GFX_[T,R]X[P,N]8 - may be used to form GFX slot or DDI
+ * 17 P_GFX_[T,R]X[P,N]9 - may be used to form GFX slot or DDI
+ * 18 P_GFX_[T,R]X[P,N]10 - may be used to form GFX slot or DDI
+ * 19 P_GFX_[T,R]X[P,N]11 - may be used to form GFX slot or DDI
+ * 20 P_GFX_[T,R]X[P,N]12 - may be used to form GFX slot or DDI
+ * 21 P_GFX_[T,R]X[P,N]13 - may be used to form GFX slot or DDI
+ * 22 P_GFX_[T,R]X[P,N]14 - may be used to form GFX slot or DDI
+ * 23 P_GFX_[T,R]X[P,N]15 - may be used to form GFX slot or DDI
+ * 24 DP0_TX[P,N]0 - rest is just for DDI (graphics outputs)
+ * 25 DP0_TX[P,N]1
+ * 26 DP0_TX[P,N]2
+ * 27 DP0_TX[P,N]3
+ * 28 DP1_TX[P,N]0
+ * 29 DP1_TX[P,N]1
+ * 30 DP1_TX[P,N]2
+ * 31 DP1_TX[P,N]3
+ * 32 DP2_TX[P,N]0
+ * 33 DP2_TX[P,N]1
+ * 34 DP2_TX[P,N]2
+ * 35 DP2_TX[P,N]3
+ * 36 DP2_TX[P,N]4
+ * 37 DP2_TX[P,N]5
+ * 38 DP2_TX[P,N]6
+ */
+
+static const PCIe_PORT_DESCRIPTOR PortList[] = {
+ /* PCIe port, Lanes 8:23, PCI Device Number 2, blue x16 slot */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 8, 23),
+ PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 2,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 1)
+ },
+ /* PCIe port, Lanes 4:7, PCI Device Number 4, black x16 slot (in fact x4) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 4, 7),
+ PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 4,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 1)
+ },
+ /* PCIe port, Lanes 0:3, UMI link to SB, PCI Device Number 8 */
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER(PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER(PortEnabled, ChannelTypeExt6db, 8,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 0)
+ },
+};
+
+/*
+ * It is not known, if the setup is complete.
+ *
+ * Tested and works: VGA/DVI
+ * Untested: HDMI
+ */
+static const PCIe_DDI_DESCRIPTOR DdiList[] = {
+ // DP0 to HDMI0/DP
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 24, 27),
+ PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux1, Hdp1)
+ },
+ // DP1 to FCH
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 28, 31),
+ PCIE_DDI_DATA_INITIALIZER(ConnectorTypeNutmegDpToVga, Aux2, Hdp2)
+ },
+ // DP2 to HDMI1/DP
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER(PcieDdiEngine, 32, 35),
+ PCIE_DDI_DATA_INITIALIZER(ConnectorTypeHDMI, Aux3, Hdp3)
+ },
+};
+
+static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+ .Flags = DESCRIPTOR_TERMINATE_LIST,
+ .SocketId = 0,
+ .PciePortList = PortList,
+ .DdiLinkList = DdiList,
+};
+
+void board_BeforeInitReset(struct sysinfo *cb, AMD_RESET_PARAMS *Reset)
+{
+ FCH_RESET_INTERFACE *FchReset = &Reset->FchInterface;
+ FchReset->Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchReset->Xhci1Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+}
+
+void board_BeforeInitEarly(struct sysinfo *cb, AMD_EARLY_PARAMS *InitEarly)
+{
+ InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
+ InitEarly->GnbConfig.PsppPolicy = 0;
+}
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+
+static CONST PSO_ENTRY ROMDATA MemoryTable_XM_E[] = {
+
+ NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, 1),
+ NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, 2),
+
+ PSO_END
+};
+
+void board_BeforeInitPost(struct sysinfo *cb, AMD_POST_PARAMS *InitPost)
+{
+ if (IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E))
+ InitPost->MemConfig.PlatformMemoryConfiguration = (PSO_ENTRY *) MemoryTable_XM_E;
+}
+
+void board_BeforeInitMid(struct sysinfo *cb, AMD_MID_PARAMS *InitMid)
+{
+ /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ InitMid->GnbMidConfiguration.iGpuVgaMode = 0;
+}
diff --git a/src/mainboard/asus/a88xm-e/OptionsIds.h b/src/mainboard/asus/a88xm-e/OptionsIds.h
new file mode 100644
index 0000000..b45f5a8
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/OptionsIds.h
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+//#define IDSOPT_IDS_ENABLED TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+//#define IDSOPT_PERF_ANALYSIS TRUE
+#define IDSOPT_ASSERT_ENABLED TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT FALSE
+//#define IDS_DEBUG_PORT 0x80
+
+#endif
diff --git a/src/mainboard/asus/a88xm-e/acpi/cpstate.asl b/src/mainboard/asus/a88xm-e/acpi/cpstate.asl
new file mode 100644
index 0000000..69de2d8
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/cpstate.asl
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* This file defines the processor and performance state capability
+ * for each core in the system. It is included into the DSDT for each
+ * core. It assumes that each core of the system has the same performance
+ * characteristics.
+*/
+/*
+#include <arch/acpi.h>
+DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001)
+ {
+ Scope (\_PR) {
+ Processor(CPU0,0,0x808,0x06) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU1,1,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU2,2,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ Processor(CPU3,3,0x0,0x0) {
+ #include "cpstate.asl"
+ }
+ }
+*/
+ /* P-state support: The maximum number of P-states supported by the */
+ /* CPUs we'll use is 6. */
+ /* Get from AMI BIOS. */
+ Name(_PSS, Package(){
+ Package()
+ {
+ 0x00000D48,
+ 0x00011170,
+ 0x00000004,
+ 0x00000004,
+ 0x00000000,
+ 0x00000000
+ },
+
+ Package()
+ {
+ 0x00000AF0,
+ 0x0000C544,
+ 0x00000004,
+ 0x00000004,
+ 0x00000001,
+ 0x00000001
+ },
+
+ Package()
+ {
+ 0x000009C4,
+ 0x0000B3B0,
+ 0x00000004,
+ 0x00000004,
+ 0x00000002,
+ 0x00000002
+ },
+
+ Package()
+ {
+ 0x00000898,
+ 0x0000ABE0,
+ 0x00000004,
+ 0x00000004,
+ 0x00000003,
+ 0x00000003
+ },
+
+ Package()
+ {
+ 0x00000708,
+ 0x0000A410,
+ 0x00000004,
+ 0x00000004,
+ 0x00000004,
+ 0x00000004
+ },
+
+ Package()
+ {
+ 0x00000578,
+ 0x00006F54,
+ 0x00000004,
+ 0x00000004,
+ 0x00000005,
+ 0x00000005
+ }
+ })
+
+ Name(_PCT, Package(){
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)},
+ ResourceTemplate(){Register(FFixedHW, 0, 0, 0)}
+ })
+
+ Method(_PPC, 0){
+ Return(0)
+ }
diff --git a/src/mainboard/asus/a88xm-e/acpi/gpe.asl b/src/mainboard/asus/a88xm-e/acpi/gpe.asl
new file mode 100644
index 0000000..297db37
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/gpe.asl
@@ -0,0 +1,72 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
diff --git a/src/mainboard/asus/a88xm-e/acpi/mainboard.asl b/src/mainboard/asus/a88xm-e/acpi/mainboard.asl
new file mode 100644
index 0000000..8398c88
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/mainboard.asl
@@ -0,0 +1,30 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+ Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ /* Some global data */
+ Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
diff --git a/src/mainboard/asus/a88xm-e/acpi/routing.asl b/src/mainboard/asus/a88xm-e/acpi/routing.asl
new file mode 100644
index 0000000..0af6b42
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/routing.asl
@@ -0,0 +1,258 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+ /* Routing is in System Bus scope */
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, INTB, 0 },
+ Package(){0x0001FFFF, 1, INTC, 0 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x16 slot */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+ /* Bus 0, Dev 4 - PCIe Bridge for 4x slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+ /* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* SB devices */
+ /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* Bus 0, Dev 21 Pcie Bridge */
+ Package(){0x0015FFFF, 0, INTA, 0 },
+ Package(){0x0015FFFF, 1, INTB, 0 },
+ Package(){0x0015FFFF, 2, INTC, 0 },
+ Package(){0x0015FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 17 },
+ Package(){0x0001FFFF, 1, 0, 18 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x16 PCIe Slot */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ Package(){0x0002FFFF, 1, 0, 19 },
+ Package(){0x0002FFFF, 2, 0, 16 },
+ Package(){0x0002FFFF, 3, 0, 17 },
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+
+ /* Bus 0, Dev 4 - PCIe Bridge for x4 PCIe Slot black */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ Package(){0x0004FFFF, 1, 0, 17 },
+ Package(){0x0004FFFF, 2, 0, 18 },
+ Package(){0x0004FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ /* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 0x12},
+ Package(){0x0010FFFF, 1, 0, 0x11},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* Bus 0, Dev 21 PCIE Bridge */
+ Package(){0x0015FFFF, 0, 0, 17 },
+ Package(){0x0015FFFF, 1, 0, 18 },
+ Package(){0x0015FFFF, 2, 0, 19 },
+ Package(){0x0015FFFF, 3, 0, 16 },
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ /* black slot */
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+
+ Name(APS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ Name(PBR0, Package(){
+ /* PCIx1 on SB */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(ABR0, Package(){
+ /* PCIx1 on SB */
+ Package(){0x0000FFFF, 0, 0, 0x10 },
+ Package(){0x0000FFFF, 1, 0, 0x11 },
+ Package(){0x0000FFFF, 2, 0, 0x12 },
+ Package(){0x0000FFFF, 3, 0, 0x13 },
+ })
+
+ Name(PBR1, Package(){
+ /* Onboard network */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(ABR1, Package(){
+ /* Onboard network */
+ Package(){0x0000FFFF, 0, 0, 0x11 },
+ Package(){0x0000FFFF, 1, 0, 0x12 },
+ Package(){0x0000FFFF, 2, 0, 0x13 },
+ Package(){0x0000FFFF, 3, 0, 0x10 },
+ })
+
+ /* SB PCI Bridge */
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+ })
diff --git a/src/mainboard/asus/a88xm-e/acpi/sata.asl b/src/mainboard/asus/a88xm-e/acpi/sata.asl
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/sata.asl
diff --git a/src/mainboard/asus/a88xm-e/acpi/si.asl b/src/mainboard/asus/a88xm-e/acpi/si.asl
new file mode 100644
index 0000000..ff0c3cf
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/si.asl
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
diff --git a/src/mainboard/asus/a88xm-e/acpi/sleep.asl b/src/mainboard/asus/a88xm-e/acpi/sleep.asl
new file mode 100644
index 0000000..08b7de4
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/sleep.asl
@@ -0,0 +1,96 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+
+ Store (0x07, UPWS)
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/asus/a88xm-e/acpi/superio.asl b/src/mainboard/asus/a88xm-e/acpi/superio.asl
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/superio.asl
diff --git a/src/mainboard/asus/a88xm-e/acpi/thermal.asl b/src/mainboard/asus/a88xm-e/acpi/thermal.asl
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/thermal.asl
diff --git a/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl b/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl
new file mode 100644
index 0000000..f5d6980
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi/usb_oc.asl
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/asus/a88xm-e/acpi_tables.c b/src/mainboard/asus/a88xm-e/acpi_tables.c
new file mode 100644
index 0000000..f94fde0
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/acpi_tables.c
@@ -0,0 +1,46 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <string.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write Hudson IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/asus/a88xm-e/board_info.txt b/src/mainboard/asus/a88xm-e/board_info.txt
new file mode 100644
index 0000000..bc090ff
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/board_info.txt
@@ -0,0 +1,7 @@
+Category: desktop
+Board URL: https://www.asus.com/Motherboards/A88XME/
+ROM package: DIP8
+ROM protocol: [http://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q64FV SPI]
+ROM socketed: y
+Flashrom support: y (without AmdSpiRomProtect modules)
+Release year: 2014
diff --git a/src/mainboard/asus/a88xm-e/buildOpts.c b/src/mainboard/asus/a88xm-e/buildOpts.c
new file mode 100644
index 0000000..c324532
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/buildOpts.c
@@ -0,0 +1,346 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ */
+
+#include <stdlib.h>
+
+#include <vendorcode/amd/agesa/f15tn/AGESA.h>
+
+/* Include the files that instantiate the configuration definitions. */
+#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h>
+#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h>
+#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h>
+#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h>
+/* the next two headers depend on heapManager.h */
+#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h>
+#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h>
+/* These tables are optional and may be used to adjust memory timing settings */
+#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h>
+#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h>
+
+
+/* Select the CPU family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT FALSE
+#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE
+
+/* Select the CPU socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+
+#define INSTALL_FM2_SOCKET_SUPPORT TRUE
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_SODIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_ECC_SUPPORT TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+#define BLDOPT_REMOVE_SRAT FALSE //TRUE
+#define BLDOPT_REMOVE_SLIT FALSE //TRUE
+#define BLDOPT_REMOVE_WHEA FALSE //TRUE
+#define BLDOPT_REMOVE_CRAT TRUE
+#define BLDOPT_REMOVE_DMI TRUE
+//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT 90000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE 0
+
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1600_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE FALSE
+#define BLDCFG_ECC_REDIRECTION FALSE
+#define BLDCFG_SCRUB_DRAM_RATE 0
+#define BLDCFG_SCRUB_L2_RATE 0
+#define BLDCFG_SCRUB_L3_RATE 0
+#define BLDCFG_SCRUB_IC_RATE 0
+#define BLDCFG_SCRUB_DC_RATE 0
+#define BLDCFG_ECC_SYMBOL_SIZE 4
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_ECC_SYNC_FLOOD FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 36 // PCIE Spread Spectrum default value 0.36%
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770
+
+#define BLDOPT_REMOVE_ALIB FALSE
+#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
+#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+
+#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200
+#define BLDCFG_CFG_ABM_SUPPORT 0
+
+//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
+
+// Specify the default values for the VRM controlling the VDDNB plane.
+// If not specified, the values used for the core VRM will be applied
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L
+//#define BLDCFG_VRM_NB_SLEW_RATE 5000 // Used in calculating the VSRampSlamTime
+//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity
+
+#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000
+
+#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3
+#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3
+
+#if IS_ENABLED(CONFIG_GFXUMA)
+#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED
+//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/
+#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#endif
+
+#define BLDCFG_IOMMU_SUPPORT TRUE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
+
+/* Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
+// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
+// #define BLDCFG_AZALIA_SSID 0x780D1022
+// #define BLDCFG_SMBUS_SSID 0x780B1022
+// #define BLDCFG_IDE_SSID 0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID 0x78011022
+// #define BLDCFG_SATA_IDE_SSID 0x78001022
+// #define BLDCFG_SATA_RAID5_SSID 0x78031022
+// #define BLDCFG_SATA_RAID_SSID 0x78021022
+// #define BLDCFG_EHCI_SSID 0x78081022
+// #define BLDCFG_OHCI_SSID 0x78071022
+// #define BLDCFG_LPC_SSID 0x780E1022
+// #define BLDCFG_SD_SSID 0x78061022
+// #define BLDCFG_XHCI_SSID 0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA TrinityApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+ { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &TrinityApMtrrSettingsList
+
+ // This is the delivery package title, "BrazosPI"
+ // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+ // This is the release version number of the AGESA component
+ // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+/* The AGESA likes to enable 512 bytes region on this base for LPC bus */
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000
+#define DFLT_AZALIA_SSID 0x780D1022
+#define DFLT_SMBUS_SSID 0x780B1022
+#define DFLT_IDE_SSID 0x780C1022
+#define DFLT_SATA_AHCI_SSID 0x78011022
+#define DFLT_SATA_IDE_SSID 0x78001022
+#define DFLT_SATA_RAID5_SSID 0x78031022
+#define DFLT_SATA_RAID_SSID 0x78021022
+#define DFLT_EHCI_SSID 0x78081022
+#define DFLT_OHCI_SSID 0x78071022
+#define DFLT_LPC_SSID 0x780E1022
+#define DFLT_SD_SSID 0x78061022
+#define DFLT_XHCI_SSID 0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1
+#define DFLT_FCH_GPP_PORT0_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT1_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT2_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+//#define BLDCFG_IR_PIN_CONTROL 0x33
+//#define FCH_NO_XHCI_SUPPORT FALSE
+GPIO_CONTROL a88xm_e_gpio[] = {
+// {183, Function1, PullUpB},
+ {-1}
+};
+#define BLDCFG_FCH_GPIO_CONTROL_LIST (&a88xm_e_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+/* Moving this include up will break AGESA. */
+#include <PlatformInstall.h>
diff --git a/src/mainboard/asus/a88xm-e/cmos.layout b/src/mainboard/asus/a88xm-e/cmos.layout
new file mode 100644
index 0000000..e1dbd9a
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/cmos.layout
@@ -0,0 +1,66 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#*****************************************************************************
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+388 4 h 0 reboot_counter
+#392 3 r 0 unused
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+456 1 e 1 ECC_memory
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+6 5 Notice
+6 6 Info
+6 7 Debug
+6 8 Spew
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb b/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb
new file mode 100644
index 0000000..e2b0eea
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/devicetree_a88xm-e.cb
@@ -0,0 +1,143 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+chip northbridge/amd/agesa/family15tn/root_complex
+
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family15tn
+ device lapic 10 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
+
+ chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 0.2 on end # IOMMU
+ device pci 1.0 on end # Internal Graphics
+ device pci 1.1 on end # Internal Audio (iGPU)
+ device pci 2.0 on end # PCIE x4/x16 yellow (?)
+ device pci 3.0 on end # unused?
+ device pci 4.0 on end # PCIE x4/x16 yellow (?)
+ device pci 5.0 off end # unused
+ device pci 6.0 off end # unused?
+ device pci 7.0 off end # LAN
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
+
+ chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
+ device pci 10.0 on end # XHCI HC0
+ device pci 10.1 on end # XHCI HC1
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on # SMBUS
+ chip drivers/generic/generic #dimm 0
+ device i2c 50 on end # 7-bit SPD address
+ end
+ chip drivers/generic/generic #dimm 1
+ device i2c 51 on end # 7-bit SPD address
+ end
+ end # SM
+ device pci 14.1 off end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/ite/it8728f
+ register "TMPIN1.mode" = "THERMAL_RESISTOR"
+ register "TMPIN2.mode" = "THERMAL_RESISTOR"
+ register "TMPIN3.mode" = "THERMAL_RESISTOR"
+
+ register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
+ register "FAN1.smart.tmpin" = "1"
+ register "FAN1.smart.tmp_off" = "0x80" # never
+ register "FAN1.smart.tmp_start" = "20"
+ register "FAN1.smart.tmp_full" = "70"
+ register "FAN1.smart.tmp_delta" = "0"
+ register "FAN1.smart.smoothing" = "1"
+ register "FAN1.smart.pwm_start" = "20"
+ register "FAN1.smart.slope" = "32"
+
+ # Enable tacho reading for chassis fan.
+ register "FAN2.mode" = "FAN_MODE_OFF"
+
+ device pnp 2e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 off # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Env Controller
+ io 0x60 = 0x290
+ io 0x62 = 0x220
+ irq 0x70 = 0
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 off # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 on # GPIO
+ io 0x60 = 0x228 #SMI
+ io 0x62 = 0x300 #Simple I/O
+ io 0x64 = 0x238 #Phony resource IT8603E does not have it
+ irq 0x70 = 0
+ end
+ device pnp 2e.a off end # CIR
+ end #superio/ite/it8728f
+ end #
+ device pci 14.3 off end # LPC
+ device pci 14.4 on end # PCI 0x4384
+ device pci 14.5 off end # USB 2
+ device pci 14.6 off end # Gec
+ device pci 14.7 off end # SD
+ device pci 15.0 on end # PCIe 0 - onboard PCIe 1x
+ device pci 15.1 off end # unused
+ device pci 15.2 on end # PCI bridge
+ device pci 15.3 off end # unused
+ end #chip southbridge/amd/agesa/hudson
+
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0x00}, {0xA2, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
+ end #domain
+end #chip northbridge/amd/agesa/family15tn/root_complex
diff --git a/src/mainboard/asus/a88xm-e/dsdt.asl b/src/mainboard/asus/a88xm-e/dsdt.asl
new file mode 100644
index 0000000..45a2606
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/dsdt.asl
@@ -0,0 +1,110 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* DefinitionBlock Statement */
+#include <arch/acpi.h>
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ OEM_ID,
+ ACPI_TABLE_CREATOR,
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ /* Globals for the platform */
+ #include "acpi/mainboard.asl"
+
+ /* Describe the USB Overcurrent pins */
+ #include "acpi/usb_oc.asl"
+
+ /* PCI IRQ mapping for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
+
+ /* Describe the processor tree (\_PR) */
+ #include <cpu/amd/agesa/family15tn/acpi/cpu.asl>
+
+ /* Describe the supported Sleep States for this Southbridge */
+ #include <southbridge/amd/common/acpi/sleepstates.asl>
+
+ /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */
+ #include "acpi/sleep.asl"
+
+ Scope(\_SB) {
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+ #include "acpi/routing.asl"
+
+ Device(PWRB) {
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04})
+ Name(_STA, 0x0B)
+ }
+
+ Device(PCI0) {
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/agesa/family15tn/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/fch.asl>
+
+ /**
+ * TODO: The devices listed here (SBR0 and SBR1) do not appear to
+ * be referenced anywhere and could possibly be removed.
+ */
+ Device(SBR0) { /* PCIe 1x SB */
+ Name(_ADR, 0x00150000)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT,0) {
+ If(PMOD){ Return(ABR0) } /* APIC mode */
+ Return (PBR0) /* PIC mode */
+ }
+ }
+
+ Device(SBR1) { /* Onboard network */
+ Name(_ADR, 0x00150001)
+ Name(_PRW, Package() {0x18, 4})
+ Method(_PRT, 0) {
+ If(PMOD){ Return(ABR1) } /* APIC mode */
+ Return (PBR1) /* PIC mode */
+ }
+ }
+ }
+
+ /* Describe PCI INT[A-H] for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
+
+ } /* End Scope(_SB) */
+
+ /* Describe SMBUS for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
+
+ /* Define the General Purpose Events for the platform */
+ #include "acpi/gpe.asl"
+
+ /* Define the Thermal zones and methods for the platform */
+ #include "acpi/thermal.asl"
+
+ /* Define the System Indicators for the platform */
+ #include "acpi/si.asl"
+
+}
+/* End of ASL file */
diff --git a/src/mainboard/asus/a88xm-e/irq_tables.c b/src/mainboard/asus/a88xm-e/irq_tables.c
new file mode 100644
index 0000000..88d2160
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/irq_tables.c
@@ -0,0 +1,101 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <device/pci_def.h>
+#include <stdint.h>
+#include <string.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = 0;
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/asus/a88xm-e/mainboard.c b/src/mainboard/asus/a88xm-e/mainboard.c
new file mode 100644
index 0000000..2a0e618
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/mainboard.c
@@ -0,0 +1,46 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/msr.h>
+#include <device/device.h>
+
+/*************************************************
+ * enable the dedicated function in thatcher board.
+ *************************************************/
+static void mainboard_enable(struct device *dev)
+{
+ msr_t msr;
+
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ msr = rdmsr(LS_CFG_MSR);
+ msr.lo &= ~(1 << 28);
+ wrmsr(LS_CFG_MSR, msr);
+
+ msr = rdmsr(DC_CFG_MSR);
+ msr.lo &= ~(1 << 4);
+ msr.lo &= ~(1 << 13);
+ wrmsr(DC_CFG_MSR, msr);
+
+ msr = rdmsr(BU_CFG_MSR);
+ msr.lo &= ~(1 << 23);
+ wrmsr(BU_CFG_MSR, msr);
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/asus/a88xm-e/mptable.c b/src/mainboard/asus/a88xm-e/mptable.c
new file mode 100644
index 0000000..d97663d
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/mptable.c
@@ -0,0 +1,181 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/smp/mpspec.h>
+#include <cpu/x86/lapic.h>
+#include <device/pci.h>
+#include <stdint.h>
+#include <string.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+
+u8 picr_data[] = {
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F
+};
+u8 intr_data[0x54] = {
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+ mc->mpc_length += length;
+ mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+ unsigned char id, const char *bustype)
+{
+ struct mpc_config_bus *mpc;
+ mpc = smp_next_mpc_entry(mc);
+ memset(mpc, '\0', sizeof(*mpc));
+ mpc->mpc_type = MP_BUS;
+ mpc->mpc_busid = id;
+ memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+ smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u8 byte;
+
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
+
+ smp_write_processors(mc);
+
+ //mptable_write_buses(mc, NULL, &bus_isa);
+ my_smp_write_bus(mc, 0, "PCI ");
+ my_smp_write_bus(mc, 1, "PCI ");
+ bus_isa = 0x02;
+ my_smp_write_bus(mc, bus_isa, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+ /* PIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+
+ /* APIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, int_sign, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin))
+
+ /* IOMMU */
+ PCI_INT(0x0, 0x0, 0x0, 0x10);
+ PCI_INT(0x0, 0x0, 0x1, 0x11);
+ PCI_INT(0x0, 0x0, 0x2, 0x12);
+ PCI_INT(0x0, 0x0, 0x3, 0x13);
+
+ /* Internal VGA */
+ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+ /* SMBUS */
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+ /* HD Audio */
+ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ struct device *dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_pci, 0x5, 0x0, 0x14);
+ PCI_INT(bus_pci, 0x5, 0x1, 0x15);
+ PCI_INT(bus_pci, 0x5, 0x2, 0x16);
+ PCI_INT(bus_pci, 0x5, 0x3, 0x17);
+ }
+
+ /* PCIe Lan*/
+ PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+ /* FCH PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/asus/a88xm-e/romstage.c b/src/mainboard/asus/a88xm-e/romstage.c
new file mode 100644
index 0000000..0a85c27
--- /dev/null
+++ b/src/mainboard/asus/a88xm-e/romstage.c
@@ -0,0 +1,102 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2012 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+
+#include <northbridge/amd/agesa/state_machine.h>
+#include <southbridge/amd/common/amd_defs.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+#include <southbridge/amd/agesa/hudson/smbus.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <superio/ite/common/ite.h>
+#include <superio/ite/it8728f/it8728f.h>
+
+#define MMIO_NON_POSTED_START 0xfed00000
+#define MMIO_NON_POSTED_END 0xfedfffff
+#define SB_MMIO_MISC32(x) *(volatile u32 *)(AMD_SB_ACPI_MMIO_ADDR + 0xE00 + (x))
+
+static void sbxxx_enable_48mhzout(void)
+{
+ /* most likely programming to 48MHz out signal */
+ u32 reg32;
+ reg32 = SB_MMIO_MISC32(0x28);
+ reg32 &= 0xffc7ffff;
+ reg32 |= 0x00100000;
+ SB_MMIO_MISC32(0x28) = reg32;
+
+ reg32 = SB_MMIO_MISC32(0x40);
+ reg32 &= ~0x80u;
+ SB_MMIO_MISC32(0x40) = reg32;
+}
+
+static void superio_init_e(void)
+{
+ pnp_devfn_t uart = PNP_DEV(0x2e, IT8728F_SP1);
+ pnp_devfn_t gpio = PNP_DEV(0x2e, IT8728F_GPIO);
+
+ ite_kill_watchdog(gpio);
+ ite_enable_serial(uart, CONFIG_TTYS0_BASE);
+ ite_enable_3vsbsw(gpio);
+}
+
+void board_BeforeAgesa(struct sysinfo *cb)
+{
+ u8 byte;
+ pci_devfn_t dev;
+
+ if (IS_ENABLED(CONFIG_POST_DEVICE_PCI_PCIE))
+ hudson_pci_port80();
+ else if (IS_ENABLED(CONFIG_POST_DEVICE_LPC))
+ hudson_lpc_port80();
+
+ /* enable SIO LPC decode */
+ dev = PCI_DEV(0, 0x14, 3);
+ byte = pci_read_config8(dev, 0x48);
+ byte |= 3; /* 2e, 2f */
+ pci_write_config8(dev, 0x48, byte);
+
+ /* enable serial decode */
+ byte = pci_read_config8(dev, 0x44);
+ byte |= (1 << 6); /* 0x3f8 */
+ pci_write_config8(dev, 0x44, byte);
+
+ post_code(0x30);
+
+ /* enable SB MMIO space */
+ outb(0x24, 0xcd6);
+ outb(0x1, 0xcd7);
+
+ /* enable SIO clock */
+ sbxxx_enable_48mhzout();
+
+ if (IS_ENABLED(CONFIG_BOARD_ASUS_A88XM_E))
+ superio_init_e();
+
+ /* turn on secondary smbus at b20 */
+ outb(0x28, 0xcd6);
+ byte = inb(0xcd7);
+ byte |= 1;
+ outb(byte, 0xcd7);
+
+ /* set DDR3 voltage */
+ byte = CONFIG_BOARD_ASUS_A88XM_E_DDR3_VOLT_VAL;
+
+ /* default is byte = 0x0, so no need to set it in this case */
+ if (byte)
+ do_smbus_write_byte(0xb20, 0x15, 0x3, byte);
+}
To view, visit change 30987. To unsubscribe, or for help writing mail filters, visit settings.