Maxim Polyakov uploaded patch set #13 to this change.

View Change

mb/up/squared/gpio: 1/3 Decode raw register values

Use the intelp2m utility [1,2] with -fld=cb options to convert the pad
configuration format with the raw values of the DW0 and DW1 registers
to the format with the bit fiends macros: PAD_FUNC(), PAD_RESET(),
PAD_TRIG(), PAD_BUF(), PAD_PULL(), etc... Also use the -ii options to
generate the target macro in the comments, so that it is easier to
understand what result we should get:

./intelp2m -ii -fld cb -t 1 -p apl -file ./up-gpio.h

This is part of the patch set
"mb/up/squared: Rewrite pad config using intelp2m":

CB:42608 - 1/3 Decode raw register values
CB:42915 - 2/3 Exclude fields that are not in PAD_CFG*
CB:39765 - 3/3 Converts bit field macros to PAD_CFG

[1] https://github.com/maxpoliak/pch-pads-parser
[2] https://review.coreboot.org/c/coreboot/+/35643

Tested with BUILD_TIMELESS=1, UP Squared, remains identical.

Change-Id: I2523439af8842365c7de901bdfad85ad16d25dcf
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
---
M src/mainboard/up/squared/gpio.h
1 file changed, 1,145 insertions(+), 505 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/08/42608/13

To view, visit change 42608. To unsubscribe, or for help writing mail filters, visit settings.