Angel Pons has uploaded this change for review.

View Change

nb/intel/haswell: Configure VCs on Egress Port

System BIOS needs to program the Virtual Channel configuration.

Change-Id: Ic8ff17b3a1c4414633a658c60f2c4f7b195e5825
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
M src/northbridge/intel/haswell/northbridge.c
1 file changed, 17 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/43821/1

diff --git a/src/northbridge/intel/haswell/northbridge.c b/src/northbridge/intel/haswell/northbridge.c
index 795d6b8..5958594 100644
--- a/src/northbridge/intel/haswell/northbridge.c
+++ b/src/northbridge/intel/haswell/northbridge.c
@@ -418,6 +418,22 @@
 	pci_write_config32(host_dev, DEVEN, deven);
 }
 
+static void init_egress(void)
+{
+	/* VC0: Enable, ID0, TC0 */
+	EPBAR32(EPVC0RCTL) = (1 << 31) | (0 << 24) | (1 << 0);
+
+	/* No Low Priority Extended VCs, one Extended VC */
+	EPBAR32(EPPVCCAP1) = (0 << 4) | (1 << 0);
+
+	/* VC1: Enable, ID1, TC1 */
+	EPBAR32(EPVC1RCTL) = (1 << 31) | (1 << 24) | (1 << 1);
+
+	/* Poll the VC1 Negotiation Pending bit */
+	while ((EPBAR16(EPVC1RSTS) & (1 << 1)) != 0)
+		;
+}
+
 static void northbridge_dmi_init(void)
 {
 	const bool is_haswell_h = !CONFIG(INTEL_LYNXPOINT_LP);
@@ -528,6 +544,7 @@
 {
 	u8 bios_reset_cpl, pair;
 
+	init_egress();
 	northbridge_dmi_init();
 	northbridge_topology_init();
 

To view, visit change 43821. To unsubscribe, or for help writing mail filters, visit settings.