Angel Pons submitted this change.
sb/intel/lynxpoint: Expose full LPC device ID in ACPI
This is merely to align ACPI files with Broadwell. It is unused.
Change-Id: I8aa297bd3c3734bbd438ff84742aadfc661adcf7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46764
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/southbridge/intel/lynxpoint/acpi/lpc.asl
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/southbridge/intel/lynxpoint/acpi/lpc.asl b/src/southbridge/intel/lynxpoint/acpi/lpc.asl
index bc1d73c..0e8bad3 100644
--- a/src/southbridge/intel/lynxpoint/acpi/lpc.asl
+++ b/src/southbridge/intel/lynxpoint/acpi/lpc.asl
@@ -9,8 +9,8 @@
OperationRegion(LPC0, PCI_Config, 0x00, 0x100)
Field (LPC0, AnyAcc, NoLock, Preserve)
{
- Offset (0x3),
- DIDH, 8, // Device ID High Byte
+ Offset (0x02),
+ PDID, 16, // Device ID
Offset (0x40),
PMBS, 16, // PMBASE
Offset (0x48),
To view, visit change 46764. To unsubscribe, or for help writing mail filters, visit settings.