Angel Pons has uploaded this change for review.
mb/gigabyte/ga-h61m-s2pv: Correct PCIe port setup
Coalescing is not needed, as all PCIe ports are used. Also, update the
comments to look more like the other two variants.
Change-Id: I3f4bf99ceec6c77f6e1eabea9b712245afee7d34
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
M src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-s2pv/devicetree.cb
1 file changed, 8 insertions(+), 9 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/39742/1
diff --git a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-s2pv/devicetree.cb b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-s2pv/devicetree.cb
index 08abc3e..b76200b 100644
--- a/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-s2pv/devicetree.cb
+++ b/src/mainboard/gigabyte/ga-h61m-s2pv/variants/ga-h61m-s2pv/devicetree.cb
@@ -34,7 +34,6 @@
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "c2_latency" = "0x0065"
register "gen1_dec" = "0x003c0a01"
- register "pcie_port_coalesce" = "1"
register "sata_interface_speed_support" = "0x3"
register "sata_port_map" = "0x33"
register "spi_lvscc" = "0x2005"
@@ -46,14 +45,14 @@
device pci 19.0 off end # Intel Gigabit Ethernet
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio Audio controller
- device pci 1c.0 on end # PCIe x1 Port (PCIEX1)
- device pci 1c.1 off end # Unused PCIe Port
- device pci 1c.2 off end # Unused PCIe Port
- device pci 1c.3 off end # Unused PCIe Port
- device pci 1c.4 on end # Realtek RTL8111F Ethernet Controller
- device pci 1c.5 on end # ITE IT8892F PCIe to PCI bridge
- device pci 1c.6 off end # Unused PCIe Port
- device pci 1c.7 off end # Unused PCIe Port
+
+ device pci 1c.0 on end # RP #1: PCIe x1 Port (PCIEX1)
+ device pci 1c.1 off end # RP #2:
+ device pci 1c.2 off end # RP #3:
+ device pci 1c.3 off end # RP #4:
+ device pci 1c.4 on end # RP #5: Realtek RTL8111F GbE NIC
+ device pci 1c.5 on end # RP #6: ITE IT8892F PCIe to PCI bridge
+
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 off end # PCI bridge
device pci 1f.0 on # LPC bridge
To view, visit change 39742. To unsubscribe, or for help writing mail filters, visit settings.