Attention is currently required from: Philipp Hug, ron minnich.
Maximilian Brune has uploaded this change for review.
soc/sifive/fu740: Add fu740 soc
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I4a8fe02ef0adcb939aa65377a35874715c5ee58a
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ibae3b8f1a534c4a5a8b26e723be7d59a92f788bf
---
M src/Kconfig
A src/soc/sifive/fu740/Makefile.inc
A src/soc/sifive/fu740/TODO
A src/soc/sifive/fu740/cbmem.c
A src/soc/sifive/fu740/chip.c
A src/soc/sifive/fu740/clint.c
A src/soc/sifive/fu740/clock.c
A src/soc/sifive/fu740/ddrregs.c
A src/soc/sifive/fu740/gpio.c
A src/soc/sifive/fu740/include/soc/addressmap.h
A src/soc/sifive/fu740/include/soc/clock.h
A src/soc/sifive/fu740/include/soc/gpio.h
A src/soc/sifive/fu740/include/soc/otp.h
A src/soc/sifive/fu740/include/soc/sdram.h
A src/soc/sifive/fu740/include/soc/spi.h
A src/soc/sifive/fu740/include/soc/ux00ddr.h
A src/soc/sifive/fu740/memlayout.ld
A src/soc/sifive/fu740/otp.c
A src/soc/sifive/fu740/regconfig-ctl.h
A src/soc/sifive/fu740/regconfig-phy.h
A src/soc/sifive/fu740/sdram.c
A src/soc/sifive/fu740/spi.c
A src/soc/sifive/fu740/spi_internal.h
A src/soc/sifive/fu740/uart.c
24 files changed, 4,655 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/53/79953/1
diff --git a/src/Kconfig b/src/Kconfig
index 5cb9a1a..511d709 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -245,7 +245,7 @@
config SEPARATE_ROMSTAGE
bool "Build a separate romstage"
- default y
+ default n # TODO fix
help
Build a separate romstage that is loaded by bootblock. With this
option disabled the romstage sources are linked inside the bootblock
diff --git a/src/soc/sifive/fu740/Makefile.inc b/src/soc/sifive/fu740/Makefile.inc
new file mode 100644
index 0000000..7022fb0
--- /dev/null
+++ b/src/soc/sifive/fu740/Makefile.inc
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+ifdef CONFIG_SOC_SIFIVE_FU740
+
+CPPFLAGS_common += -Isrc/soc/sifive/fu740/include
+
+bootblock-y += uart.c
+bootblock-y += clint.c
+bootblock-y += spi.c
+bootblock-y += sdram.c
+bootblock-y += cbmem.c
+bootblock-y += otp.c
+bootblock-y += clock.c
+bootblock-y += ddrregs.c
+bootblock-y += chip.c
+bootblock-y += gpio.c
+
+ramstage-y += uart.c
+ramstage-y += clint.c
+ramstage-y += spi.c
+ramstage-y += sdram.c
+ramstage-y += cbmem.c
+ramstage-y += otp.c
+ramstage-y += clock.c
+ramstage-y += chip.c
+
+$(objcbfs)/romstage.bin: $(objcbfs)/romstage.raw.bin
+ @printf " GPT $(notdir $(@))\n"
+ @util/riscv/sifive-gpt.py $< $@
+
+$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin
+ @printf " GPT $(notdir $(@))\n"
+ @util/riscv/sifive-gpt.py $< $@
+
+endif
diff --git a/src/soc/sifive/fu740/TODO b/src/soc/sifive/fu740/TODO
new file mode 100644
index 0000000..c7e03a5
--- /dev/null
+++ b/src/soc/sifive/fu740/TODO
@@ -0,0 +1,52 @@
+1. put more into common code (e.g. sdram.c)
+2. refactor SPI code. It works but there are quite some TODO left and it also currently only supports 1 MSEL configuration
+3. sometimes PCIe is not working with the following error message in Linux:
+[ 0.619711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+[ 0.621521] fu740-pcie e00000000.pcie: host bridge /soc/pcie@e00000000 ranges:
+[ 0.621603] fu740-pcie e00000000.pcie: IO 0x0060080000..0x006008ffff -> 0x0060080000
+[ 0.621659] fu740-pcie e00000000.pcie: MEM 0x0060090000..0x007fffffff -> 0x0060090000
+[ 0.621685] fu740-pcie e00000000.pcie: MEM 0x2000000000..0x3fffffffff -> 0x2000000000
+[ 0.727890] fu740-pcie e00000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4096G
+[ 0.828041] fu740-pcie e00000000.pcie: PCIe Gen.1 x8 link up
+[ 1.828944] fu740-pcie e00000000.pcie: Phy link never came up
+[ 1.828961] fu740-pcie e00000000.pcie: error: link did not start at new speed
+[ 1.829142] ------------[ cut here ]------------
+[ 1.829152] WARNING: CPU: 2 PID: 1 at drivers/pci/controller/dwc/pcie-fu740.c:232 fu740_pcie_start_link+0x1b4/0x1ce
+[ 1.829191] Modules linked in:
+[ 1.829205] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.5.0-9-generic #9.1-Ubuntu
+[ 1.829215] Hardware name: SiFive HiFive Unmatched A00 (DT)
+[ 1.829221] epc : fu740_pcie_start_link+0x1b4/0x1ce
+[ 1.829234] ra : fu740_pcie_start_link+0x1ca/0x1ce
+[ 1.829247] epc : ffffffff806fa1ac ra : ffffffff806fa1c2 sp : ffffffc800023b30
+[ 1.829256] gp : ffffffff822602d8 tp : ffffffd88027b600 t0 : ffffffff82029670
+[ 1.829263] t1 : 0000000000000000 t2 : 0000000000000000 s0 : ffffffc800023b70
+[ 1.829270] s1 : ffffffd88095d840 a0 : 0000000000000000 a1 : 0000000000000000
+[ 1.829276] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
+[ 1.829282] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000
+[ 1.829288] s2 : ffffffffffffff92 s3 : 0000000000716c81 s4 : ffffffd8802b2c10
+[ 1.829295] s5 : 0000000000000003 s6 : ffffffffffffff92 s7 : ffffffff8108b448
+[ 1.829301] s8 : 0000000000000008 s9 : ffffffff80e00106 s10: 0000000000000000
+[ 1.829307] s11: 0000000000000000 t3 : 0000000000000000 t4 : 0000000000000000
+[ 1.829313] t5 : 0000000000000000 t6 : 0000000000000000
+[ 1.829317] status: 0000000200000120 badaddr: ffffffffffffff92 cause: 0000000000000003
+[ 1.829326] [<ffffffff806fa1ac>] fu740_pcie_start_link+0x1b4/0x1ce
+[ 1.829341] [<ffffffff806f8692>] dw_pcie_host_init+0x21e/0x2cc
+[ 1.829355] [<ffffffff806fa2ca>] fu740_pcie_probe+0x104/0x15a
+[ 1.829366] [<ffffffff8083e510>] platform_probe+0x5e/0xc6
+[ 1.829388] [<ffffffff8083a7b4>] call_driver_probe+0x22/0x142
+[ 1.829400] [<ffffffff8083b36e>] really_probe+0x9a/0x2a2
+[ 1.829413] [<ffffffff8083b5f4>] __driver_probe_device+0x7e/0x146
+[ 1.829425] [<ffffffff8083b6f4>] driver_probe_device+0x38/0xd0
+[ 1.829436] [<ffffffff8083b966>] __driver_attach+0xee/0x1e8
+[ 1.829448] [<ffffffff80838e78>] bus_for_each_dev+0x6c/0xc4
+[ 1.829460] [<ffffffff8083acbe>] driver_attach+0x26/0x34
+[ 1.829471] [<ffffffff8083a1fe>] bus_add_driver+0x112/0x21e
+[ 1.829483] [<ffffffff8083cb12>] driver_register+0x52/0x106
+[ 1.829497] [<ffffffff8083e0b6>] __platform_driver_register+0x28/0x34
+[ 1.829511] [<ffffffff80e3322e>] fu740_pcie_driver_init+0x22/0x2c
+[ 1.829528] [<ffffffff80002962>] do_one_initcall+0x5c/0x1e2
+[ 1.829542] [<ffffffff80e01836>] kernel_init_freeable+0x286/0x300
+[ 1.829560] [<ffffffff80ce5b40>] kernel_init+0x2a/0x16e
+[ 1.829584] [<ffffffff80003f82>] ret_from_fork+0xe/0x20
+[ 1.829597] ---[ end trace 0000000000000000 ]---
+[ 1.829635] fu740-pcie: probe of e00000000.pcie failed with error -110
diff --git a/src/soc/sifive/fu740/cbmem.c b/src/soc/sifive/fu740/cbmem.c
new file mode 100644
index 0000000..e3ccf3a
--- /dev/null
+++ b/src/soc/sifive/fu740/cbmem.c
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cbmem.h>
+#include <commonlib/helpers.h>
+#include <soc/addressmap.h>
+#include <soc/sdram.h>
+#include <symbols.h>
+
+uintptr_t cbmem_top_chipset(void)
+{
+#define FU740_MAXDRAM 0x800000000ULL // 32 GiB
+ return MIN((uintptr_t)FU740_DRAM + sdram_size(), FU740_MAXDRAM);
+}
diff --git a/src/soc/sifive/fu740/chip.c b/src/soc/sifive/fu740/chip.c
new file mode 100644
index 0000000..6909717
--- /dev/null
+++ b/src/soc/sifive/fu740/chip.c
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <cbmem.h>
+#include <device/device.h>
+#include <soc/addressmap.h>
+#include <symbols.h>
+
+static void fu740_init(struct device *dev) {
+ int index = 0;
+ ram_from_to(dev, index++, FU740_DRAM, (uintptr_t)cbmem_top());
+}
+
+struct chip_operations soc_sifive_fu740_ops = {
+ CHIP_NAME("SIFIVE FU740")
+ .enable_dev = fu740_init,
+};
+
diff --git a/src/soc/sifive/fu740/clint.c b/src/soc/sifive/fu740/clint.c
new file mode 100644
index 0000000..6f25148
--- /dev/null
+++ b/src/soc/sifive/fu740/clint.c
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <mcall.h>
+#include <stdint.h>
+#include <device/mmio.h>
+#include <soc/addressmap.h>
+
+void mtime_init(void)
+{
+ long hart_id = read_csr(mhartid);
+ HLS()->time = (uint64_t *)(FU740_CLINT + 0xbff8);
+ HLS()->timecmp = (uint64_t *)(FU740_CLINT + 0x4000 + 8 * hart_id);
+}
+
+void set_msip(int hartid, int val)
+{
+ write32((void *)(FU740_CLINT + 4 * (uintptr_t)hartid), !!val);
+}
diff --git a/src/soc/sifive/fu740/clock.c b/src/soc/sifive/fu740/clock.c
new file mode 100644
index 0000000..48046e2
--- /dev/null
+++ b/src/soc/sifive/fu740/clock.c
@@ -0,0 +1,452 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+// This file is used for setting up clocks and get devices out of reset
+// For more Information see FU740-C000 Manual Chapter 7 Clocking and Reset
+
+#include <console/console.h>
+#include <delay.h>
+#include <device/mmio.h>
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <gpio.h>
+#include <stdint.h>
+
+// Clock frequencies for the cores, ddr and the peripherals are all derived from the hfclk (high frequency clock) and it is always 26 MHz
+#define FU740_HFCLK_FREQ 26*MHz
+
+struct prci_ctlr {
+ u32 hfxosccfg; // offset 0x00
+ u32 core_pllcfg; // offset 0x04
+ u32 core_plloutdiv; // offset 0x08
+ u32 ddr_pllcfg; // offset 0x0c
+ u32 ddr_plloutdiv; // offset 0x10
+ u32 pcieaux_plloutdiv; // offset 0x14 (undocumented)
+ u32 reserved18; // offset 0x18
+ u32 gemgxl_pllcfg; // offset 0x1c
+ u32 gemgxl_plloutdiv; // offset 0x20
+ u32 core_clk_sel_reg; // offset 0x24
+ u32 devices_reset_n; // offset 0x28
+ u32 clk_mux_status; // offset 0x2C
+ u32 cltx_pllcfg; // offset 0x30 chiplink (undocumented)
+ u32 cltx_plloutdiv; // offset 0x34 chiplink (undocumented)
+ u32 dvfs_core_pllcfg; // offset 0x38
+ u32 dvfs_core_plloutdiv; // offset 0x3C
+ u32 corepllsel; // offset 0x40 (undocumented, but probably same as last gen)
+ u8 reserved44[12]; // offset 0x44
+ u32 hfpclk_pllcfg; // offset 0x50
+ u32 hfpclk_plloutdiv; // offset 0x54
+ u32 hfpclkpllsel; // offset 0x58 (undocumented, but probably same as last gen)
+ u32 hfpclk_div_reg; // offset 0x5C
+ u8 reserved60[128]; // offset 0x60
+ u32 prci_plls; // offset 0xE0
+ u8 reservedE4[12]; // offset 0xE4
+ u32 procmoncfg_core_clock; // offset 0xF0 (undocumented)
+} __packed;
+
+static struct prci_ctlr *prci = (void *)FU740_PRCI;
+
+// =================================
+// clock selections
+// =================================
+
+#define PRCI_COREPLLSEL_MASK 1
+#define PRCI_COREPLLSEL_COREPLL 0
+#define PRCI_COREPLLSEL_DVFSCOREPLL 1
+
+#define PRCI_CORECLKSEL_MASK 1
+#define PRCI_CORECLKSEL_CORECLKPLL 0
+#define PRCI_CORECLKSEL_HFCLK 1
+
+#define PRCI_HFPCLKSEL_MASK 1
+#define PRCI_HFPCLKSEL_PLL 0
+#define PRCI_HFPCLKSEL_HFCLK 1
+
+// ===================================
+// pllcfg register format is used by all PLLs
+// ===================================
+
+#define PRCI_PLLCFG_DIVR_SHIFT 0
+#define PRCI_PLLCFG_DIVF_SHIFT 6
+#define PRCI_PLLCFG_DIVQ_SHIFT 15
+#define PRCI_PLLCFG_RANGE_SHIFT 18
+#define PRCI_PLLCFG_BYPASS_SHIFT 24
+#define PRCI_PLLCFG_FSEBYPASS_SHIFT 25
+#define PRCI_PLLCFG_LOCK_SHIFT 31
+
+#define PRCI_PLLCFG_DIVR_MASK (0x03f << PRCI_PLLCFG_DIVR_SHIFT)
+#define PRCI_PLLCFG_DIVF_MASK (0x1ff << PRCI_PLLCFG_DIVF_SHIFT)
+#define PRCI_PLLCFG_DIVQ_MASK (0x007 << PRCI_PLLCFG_DIVQ_SHIFT)
+#define PRCI_PLLCFG_RANGE_MASK (0x007 << PRCI_PLLCFG_RANGE_SHIFT)
+#define PRCI_PLLCFG_BYPASS_MASK (0x001 << PRCI_PLLCFG_BYPASS_SHIFT)
+#define PRCI_PLLCFG_FSEBYPASS_MASK (0x001 << PRCI_PLLCFG_FSEBYPASS_SHIFT)
+#define PRCI_PLLCFG_LOCK_MASK (0x001 << PRCI_PLLCFG_LOCK_SHIFT)
+
+// ===================================
+// plloutdiv register formats
+// ===================================
+
+// registered are used to enable/disable PLLs
+#define PRCI_DVFSCORE_PLLOUTDIV_MASK (1 << 24) // Note: u-boot and fu740 manual differ here ...
+#define PRCI_HFPCLK_PLLOUTDIV_MASK (1 << 31) // Note: according to u-boot it is (1 << 24) but if I use that it gets stuck
+#define PRCI_DDR_PLLOUTDIV_MASK (1 << 31)
+#define PRCI_GEMGXL_PLLOUTDIV_MASK (1 << 31)
+#define PRCI_CLTX_PLLOUTDIV_MASK (1 << 24) // undocumented (chiplink tx)
+#define PRCI_PCIEAUX_PLLOUTDIV_MASK (1 << 0) // undocumented
+#define PRCI_CORE_PLLOUTDIV_MASK (1 << 31) // undocumented
+
+// ===================================
+// devicereset register formats
+// ===================================
+
+// used to get devices in or out of reset
+#define PRCI_DEVICES_RESET_DDR_CTRL_RST (1 << 0) // DDR Controller
+#define PRCI_DEVICES_RESET_DDR_AXI_RST (1 << 1) // DDR Controller AXI Interface
+#define PRCI_DEVICES_RESET_DDR_AHB_RST (1 << 2) // DDR Controller AHB Interface
+#define PRCI_DEVICES_RESET_DDR_PHY_RST (1 << 3) // DDR PHY
+#define PRCI_DEVICES_RESET_PCIEAUX_RST (1 << 4)
+#define PRCI_DEVICES_RESET_GEMGXL_RST (1 << 5) // Gigabit Ethernet Subsystem
+#define PRCI_DEVICES_RESET_CLTX_RST (1 << 6) // chiplink reset (undocumented)
+
+// ===================================
+// prci_plls register format
+// ===================================
+
+// used to check if certain PLLs are present in the SOC
+#define PRCI_PLLS_CLTXPLL (1 << 0)
+#define PRCI_PLLS_GEMGXLPLL (1 << 1)
+#define PRCI_PLLS_DDRPLL (1 << 2)
+#define PRCI_PLLS_HFPCLKPLL (1 << 3)
+#define PRCI_PLLS_DVFSCOREPLL (1 << 4)
+#define PRCI_PLLS_COREPLL (1 << 5)
+
+// ===================================
+// clk_mux_status register format
+// ===================================
+
+// read only register which is used to set some clock multiplex settings
+// the value of this register depends on the state of pins connected to the FU740 SOC
+// on the hifive-unmatched board the state of the pins is set by a hardware switch
+#define PRCI_CLK_MUX_STATUS_CORECLKPLLSEL (1 << 0)
+ // 0 - HFCLK or CORECLK
+ // 1 - only HFCLK
+#define PRCI_CLK_MUX_STATUS_TLCLKSEL (1 << 1)
+ // 0 - CORECLK/2
+ // 1 - CORECLK
+#define PRCI_CLK_MUX_STATUS_RTCXSEL (1 << 2)
+ // 0 - use HFXCLK for RTC
+ // 1 - use RTCXALTCLKIN for RTC
+#define PRCI_CLK_MUX_STATUS_DDRCTRLCLKSEL (1 << 3)
+#define PRCI_CLK_MUX_STATUS_DDRPHYCLKSEL (1 << 4)
+#define PRCI_CLK_MUX_STATUS_RESERVED (1 << 5)
+#define PRCI_CLK_MUX_STATUS_GEMGXLCLKSEL (1 << 6)
+#define PRCI_CLK_MUX_STATUS_MAINMEMCLKSEL (1 << 7)
+
+// ===================================
+// hfxosccfg register format
+// ===================================
+
+#define PRCI_HFXOSCCFG_HFXOSEN (1 << 30) // Crystal Oszillator enable
+ // Note: I guess (it is not documented)
+ // 0 - XTAL PADS
+ // 1 - OSC PADS
+#define PRCI_HFXOSCCFG_HFXOSCRDY (1 << 31) // Crystal Oszillator ready
+
+struct pll_settings {
+ unsigned int divr:6; // divider before PLL loop (reference), equal to divr + 1
+ unsigned int divf:9; // VCO feedback divider value, equal to 2 * (divf + 1)
+ unsigned int divq:3; // divider after PLL loop, equal to 2^divq
+ // PLL filter range (TODO documentation is not really clear on how to set it)
+ unsigned int range:3;
+ unsigned int bypass:1; // probably used to bypass the PLL
+ // internal or external input path (internal = 1, external = 0)
+ //WARN this is only a guess since it is undocumented
+ unsigned int fsebypass:1;
+};
+
+static void configure_pll(u32 *reg, const struct pll_settings *s)
+{
+ // Write the settings to the register
+ u32 c = read32(reg);
+ clrsetbits32(&c, PRCI_PLLCFG_DIVR_MASK
+ | PRCI_PLLCFG_DIVF_MASK
+ | PRCI_PLLCFG_DIVQ_MASK
+ | PRCI_PLLCFG_RANGE_MASK
+ | PRCI_PLLCFG_BYPASS_MASK
+ | PRCI_PLLCFG_FSEBYPASS_MASK,
+ (s->divr << PRCI_PLLCFG_DIVR_SHIFT)
+ | (s->divf << PRCI_PLLCFG_DIVF_SHIFT)
+ | (s->divq << PRCI_PLLCFG_DIVQ_SHIFT)
+ | (s->range << PRCI_PLLCFG_RANGE_SHIFT)
+ | (s->bypass << PRCI_PLLCFG_BYPASS_SHIFT)
+ | (s->fsebypass << PRCI_PLLCFG_FSEBYPASS_SHIFT));
+ write32(reg, c);
+
+ // Wait for PLL lock
+ while (!(read32(reg) & PRCI_PLLCFG_LOCK_MASK));
+}
+
+/*
+ * Section 7.1 recommends a frequency of 1.0 GHz (up to 1.5 GHz is possible)
+ * Section 7.4.2 provides the necessary values
+ *
+ * COREPLL is set up for ~1 GHz output frequency.
+ * divr = 0 (x1), divf = 76 (x154) => (4004 MHz VCO), divq = 2 (/4 Output divider)
+ */
+static const struct pll_settings corepll_settings = {
+ .divr = 0,
+ .divf = 76,
+ .divq = 2,
+ .range = 4,
+ .bypass = 0,
+ .fsebypass = 1, // external feedback mode is not supported
+};
+
+/*
+ * Section 7.4.3: DDR and Ethernet Subsystem Clocking and Reset
+ *
+ * DDRPLL is set up for 933 MHz output frequency.
+ * divr = 0 (x1), divf = 71 (x144) => (3744 MHz VCO), divq = 2 (/4 output divider)
+ */
+static const struct pll_settings ddrpll_settings = {
+ .divr = 0,
+ .divf = 71,
+ .divq = 2,
+ .range = 4,
+ .bypass = 0,
+ .fsebypass = 1, // external feedback mode is not supported
+};
+
+/*
+ * GEMGXLPLL is set up for 125 MHz output frequency.
+ * divr = 0 (x1), divf = 76 (x154) => (4004 MHz VCO), divq = 5 (/32 output divider)
+ */
+static const struct pll_settings gemgxlpll_settings = {
+ .divr = 0,
+ .divf = 76,
+ .divq = 5,
+ .range = 4,
+ .bypass = 0,
+ .fsebypass = 1, // external feedback mode is not supported
+};
+
+/*
+ * HFPCLKPLL is set up for 520 MHz output frequency.
+ * TODO a lower value should also suffice as well as safe some power
+ * divr = 1 (/2), divf = 39 (x80) => (2080 MHz VCO), divq = 2 (/4 output divider)
+ */
+static const struct pll_settings hfpclkpll_settings = {
+ .divr = 1,
+ //.divf = 122,
+ .divf = 39,
+ .divq = 2,
+ .range = 4,
+ .bypass = 0,
+ .fsebypass = 1, // external feedback mode is not supported
+};
+
+/*
+ * CLTXCLKPLL is set up for 520 MHz output frequency.
+ * divr = 1 (/2), divf = 122 (x154) => (4004 MHz VCO), divq = 2 (/4 output divider)
+ */
+static const struct pll_settings cltxpll_settings = {
+ .divr = 1,
+ .divf = 39,
+ .divq = 2,
+ .range = 4,
+ .bypass = 0,
+ .fsebypass = 1, // external feedback mode is not supported
+};
+
+//TODO maybe it makes sense to disable the clocks before configuring them (test out)
+
+static void init_coreclk(void)
+{
+ // we can't modify the coreclk PLL while we are running on it, so let coreclk devise
+ // its clock from hfclk before modifying PLL
+ clrsetbits32(&prci->core_clk_sel_reg, PRCI_CORECLKSEL_MASK, PRCI_CORECLKSEL_HFCLK);
+
+ // only configure pll if it is present
+ if (!(read32(&prci->prci_plls) & PRCI_PLLS_COREPLL)) {
+ return;
+ }
+
+ configure_pll(&prci->core_pllcfg, &corepll_settings);
+
+ // switch coreclk multiplexer to use corepll as clock source again
+ clrsetbits32(&prci->core_clk_sel_reg, PRCI_CORECLKSEL_MASK, PRCI_CORECLKSEL_CORECLKPLL);
+}
+
+static void init_ddrclk(void)
+{
+ // only configure pll if it is present
+ if (!(read32(&prci->prci_plls) & PRCI_PLLS_DDRPLL)) {
+ return;
+ }
+
+ // disable ddr clock output before reconfiguring the PLL
+ u32 cfg1 = read32(&prci->ddr_plloutdiv);
+ clrbits32(&cfg1, PRCI_DDR_PLLOUTDIV_MASK);
+ write32(&prci->ddr_plloutdiv, cfg1);
+
+ configure_pll(&prci->ddr_pllcfg, &ddrpll_settings);
+
+ // PLL is ready/locked so enable it (its gated)
+ setbits32(&cfg1, PRCI_DDR_PLLOUTDIV_MASK);
+ write32(&prci->ddr_plloutdiv, cfg1);
+}
+
+static void init_gemgxlclk(void)
+{
+ // only configure pll if it is present
+ if (!(read32(&prci->prci_plls) & PRCI_PLLS_GEMGXLPLL)) {
+ return;
+ }
+
+ // disable gemgxl clock output before reconfiguring the PLL
+ u32 cfg1 = read32(&prci->gemgxl_plloutdiv);
+ clrbits32(&cfg1, PRCI_GEMGXL_PLLOUTDIV_MASK);
+ write32(&prci->gemgxl_plloutdiv, cfg1);
+
+ configure_pll(&prci->gemgxl_pllcfg, &gemgxlpll_settings);
+
+ // PLL is ready/locked so enable it (its gated)
+ setbits32(&cfg1, PRCI_GEMGXL_PLLOUTDIV_MASK);
+ write32(&prci->gemgxl_plloutdiv, cfg1);
+}
+
+/*
+ * Configure High Frequency peripheral clock which is used by
+ * UART, SPI, GPIO, I2C and PWM subsystem
+ */
+static void init_hfpclk(void)
+{
+ // we can't modify the hfpclk PLL while we are running on it, so let pclk devise
+ // its clock from hfclk before modifying PLL
+ u32 hfpclksel = read32(&prci->hfpclkpllsel);
+ hfpclksel |= PRCI_HFPCLKSEL_HFCLK;
+ write32(&prci->hfpclkpllsel, hfpclksel);
+
+ configure_pll(&prci->hfpclk_pllcfg, &hfpclkpll_settings);
+
+ // PLL is ready/locked so enable it (its gated)
+ u32 hfpclk_plloutdiv = read32(&prci->hfpclk_plloutdiv);
+ hfpclk_plloutdiv |= PRCI_HFPCLK_PLLOUTDIV_MASK;
+ write32(&prci->hfpclk_plloutdiv, hfpclk_plloutdiv);
+
+ printk(BIOS_DEBUG, "%s: 1\n", __func__);
+ mdelay(1);
+
+ // switch to using PLL for hfpclk
+ clrbits32(&prci->hfpclkpllsel, PRCI_HFPCLKSEL_MASK);
+
+ udelay(70);
+}
+
+static void reset_deassert(u8 reset_index) {
+ u32 device_reset = read32(&prci->devices_reset_n);
+ device_reset |= reset_index;
+ write32(&prci->devices_reset_n, device_reset);
+}
+
+static void init_cltx(void)
+{
+ // disable hfpclkpll before configuring it
+ u32 cfg1 = read32(&prci->cltx_plloutdiv);
+ clrbits32(&cfg1, PRCI_CLTX_PLLOUTDIV_MASK);
+ write32(&prci->cltx_plloutdiv, cfg1);
+
+ configure_pll(&prci->cltx_pllcfg, &cltxpll_settings);
+
+ // PLL is ready/locked so enable it (its gated)
+ setbits32(&cfg1, PRCI_CLTX_PLLOUTDIV_MASK);
+ write32(&prci->cltx_plloutdiv, cfg1);
+
+ // get chiplink out of reset
+ reset_deassert(PRCI_DEVICES_RESET_CLTX_RST);
+
+ udelay(70);
+}
+
+void clock_init(void)
+{
+ printk(BIOS_SPEW, "PLLs present on platform: %x\n", read32(&prci->prci_plls));
+
+ // first configure the coreclk (used by HARTs) to get maximum speed early on
+ init_coreclk();
+
+ // put all devices in reset (e.g. DDR, ethernet, pcie) before configuring their clocks
+ write32(&prci->devices_reset_n, 0);
+
+ // initialize clock used by DDR subsystem
+ init_ddrclk();
+
+ // get DDR controller out of reset
+ reset_deassert(PRCI_DEVICES_RESET_DDR_CTRL_RST);
+
+ // wait at least one full DDR controller clock cycle
+ asm volatile ("fence");
+
+ // get DDR controller (register interface) out of reset
+ // get DDR subsystem PHY out of reset
+ reset_deassert(PRCI_DEVICES_RESET_DDR_AXI_RST |
+ PRCI_DEVICES_RESET_DDR_AHB_RST |
+ PRCI_DEVICES_RESET_DDR_PHY_RST);
+
+ // we need to wait 256 full ddrctrl clock cycles until we can interact with the DDR subsystem
+ for (int i = 0; i < 256; i++)
+ asm volatile ("nop");
+
+ if (read32(&prci->prci_plls) & PRCI_PLLS_HFPCLKPLL) {
+ // set hfclk as reference for peripheral clock since we don't have the PLL
+ //clrsetbits32(&prci->hfpclkpllsel, PRCI_HFPCLKSEL_MASK, PRCI_HFPCLKSEL_HFCLK);
+ init_hfpclk();
+ } else if (read32(&prci->prci_plls) & PRCI_PLLS_CLTXPLL) {
+ // Note: this path has never been tested since the platforms tested with
+ // always have HFPCLKPLL
+ init_cltx();
+ // get chiplink out of reset
+ reset_deassert(PRCI_DEVICES_RESET_CLTX_RST);
+ }
+
+ // GEMGXL init VSC8541 PHY reset sequence;
+ gpio_set_direction(GEMGXL_RST, GPIO_OUTPUT);
+ gpio_set(GEMGXL_RST, 1);
+
+ udelay(1);
+
+ /* Reset PHY again to enter unmanaged mode */
+ gpio_set(GEMGXL_RST, 0);
+ udelay(1);
+ gpio_set(GEMGXL_RST, 1);
+ mdelay(15);
+
+ init_gemgxlclk();
+
+ // get ethernet out of reset
+ reset_deassert(PRCI_DEVICES_RESET_GEMGXL_RST);
+}
+
+// get the peripheral clock frequency used by UART (probably also SPI, GPIO, I2C and PWM)
+int clock_get_pclk(void)
+{
+ u64 pclk = FU740_HFCLK_FREQ;
+
+ // check if hfpclkpll is present and
+ // check if hfpclkpll is selected in the multiplexer TODO
+ // check if hpfclkpll is enabled
+ if ((read32(&prci->prci_plls) & PRCI_PLLS_HFPCLKPLL) &&
+ (read32(&prci->hfpclk_plloutdiv) & PRCI_HFPCLK_PLLOUTDIV_MASK)) {
+ int hfpclk_pllcfg = read32(&prci->hfpclk_pllcfg);
+ int divr = (hfpclk_pllcfg & PRCI_PLLCFG_DIVR_MASK) >> PRCI_PLLCFG_DIVR_SHIFT;
+ int divf = (hfpclk_pllcfg & PRCI_PLLCFG_DIVF_MASK) >> PRCI_PLLCFG_DIVF_SHIFT;
+ int divq = (hfpclk_pllcfg & PRCI_PLLCFG_DIVQ_MASK) >> PRCI_PLLCFG_DIVQ_SHIFT;
+ pclk /= (divr + 1); // reference divider
+ pclk *= (2 * (divf + 1)); // feedback divider
+ pclk /= (1 << divq); // output divider
+ }
+ printk(BIOS_DEBUG, "pclk: %llu\n", pclk / (read32(&prci->hfpclk_div_reg) + 2));
+
+ // divider value before pclk seems to be (hfpclkdiv + 2). Not mentioned in fu740 manual though.
+ return pclk / (read32(&prci->hfpclk_div_reg) + 2);
+}
diff --git a/src/soc/sifive/fu740/ddrregs.c b/src/soc/sifive/fu740/ddrregs.c
new file mode 100644
index 0000000..5e86c0d
--- /dev/null
+++ b/src/soc/sifive/fu740/ddrregs.c
@@ -0,0 +1,1491 @@
+/* SPDX-License-Identifier: Apache-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <stdint.h>
+#include "regconfig-phy.h"
+#include "regconfig-ctl.h"
+
+const uint32_t denali_ddr_phy_data[1215] = {
+ DENALI_PHY_00_DATA,
+ DENALI_PHY_01_DATA,
+ DENALI_PHY_02_DATA,
+ DENALI_PHY_03_DATA,
+ DENALI_PHY_04_DATA,
+ DENALI_PHY_05_DATA,
+ DENALI_PHY_06_DATA,
+ DENALI_PHY_07_DATA,
+ DENALI_PHY_08_DATA,
+ DENALI_PHY_09_DATA,
+ DENALI_PHY_10_DATA,
+ DENALI_PHY_11_DATA,
+ DENALI_PHY_12_DATA,
+ DENALI_PHY_13_DATA,
+ DENALI_PHY_14_DATA,
+ DENALI_PHY_15_DATA,
+ DENALI_PHY_16_DATA,
+ DENALI_PHY_17_DATA,
+ DENALI_PHY_18_DATA,
+ DENALI_PHY_19_DATA,
+ DENALI_PHY_20_DATA,
+ DENALI_PHY_21_DATA,
+ DENALI_PHY_22_DATA,
+ DENALI_PHY_23_DATA,
+ DENALI_PHY_24_DATA,
+ DENALI_PHY_25_DATA,
+ DENALI_PHY_26_DATA,
+ DENALI_PHY_27_DATA,
+ DENALI_PHY_28_DATA,
+ DENALI_PHY_29_DATA,
+ DENALI_PHY_30_DATA,
+ DENALI_PHY_31_DATA,
+ DENALI_PHY_32_DATA,
+ DENALI_PHY_33_DATA,
+ DENALI_PHY_34_DATA,
+ DENALI_PHY_35_DATA,
+ DENALI_PHY_36_DATA,
+ DENALI_PHY_37_DATA,
+ DENALI_PHY_38_DATA,
+ DENALI_PHY_39_DATA,
+ DENALI_PHY_40_DATA,
+ DENALI_PHY_41_DATA,
+ DENALI_PHY_42_DATA,
+ DENALI_PHY_43_DATA,
+ DENALI_PHY_44_DATA,
+ DENALI_PHY_45_DATA,
+ DENALI_PHY_46_DATA,
+ DENALI_PHY_47_DATA,
+ DENALI_PHY_48_DATA,
+ DENALI_PHY_49_DATA,
+ DENALI_PHY_50_DATA,
+ DENALI_PHY_51_DATA,
+ DENALI_PHY_52_DATA,
+ DENALI_PHY_53_DATA,
+ DENALI_PHY_54_DATA,
+ DENALI_PHY_55_DATA,
+ DENALI_PHY_56_DATA,
+ DENALI_PHY_57_DATA,
+ DENALI_PHY_58_DATA,
+ DENALI_PHY_59_DATA,
+ DENALI_PHY_60_DATA,
+ DENALI_PHY_61_DATA,
+ DENALI_PHY_62_DATA,
+ DENALI_PHY_63_DATA,
+ DENALI_PHY_64_DATA,
+ DENALI_PHY_65_DATA,
+ DENALI_PHY_66_DATA,
+ DENALI_PHY_67_DATA,
+ DENALI_PHY_68_DATA,
+ DENALI_PHY_69_DATA,
+ DENALI_PHY_70_DATA,
+ DENALI_PHY_71_DATA,
+ DENALI_PHY_72_DATA,
+ DENALI_PHY_73_DATA,
+ DENALI_PHY_74_DATA,
+ DENALI_PHY_75_DATA,
+ DENALI_PHY_76_DATA,
+ DENALI_PHY_77_DATA,
+ DENALI_PHY_78_DATA,
+ DENALI_PHY_79_DATA,
+ DENALI_PHY_80_DATA,
+ DENALI_PHY_81_DATA,
+ DENALI_PHY_82_DATA,
+ DENALI_PHY_83_DATA,
+ DENALI_PHY_84_DATA,
+ DENALI_PHY_85_DATA,
+ DENALI_PHY_86_DATA,
+ DENALI_PHY_87_DATA,
+ DENALI_PHY_88_DATA,
+ DENALI_PHY_89_DATA,
+ DENALI_PHY_90_DATA,
+ DENALI_PHY_91_DATA,
+ DENALI_PHY_92_DATA,
+ DENALI_PHY_93_DATA,
+ DENALI_PHY_94_DATA,
+ DENALI_PHY_95_DATA,
+ DENALI_PHY_96_DATA,
+ DENALI_PHY_97_DATA,
+ DENALI_PHY_98_DATA,
+ DENALI_PHY_99_DATA,
+ DENALI_PHY_100_DATA,
+ DENALI_PHY_101_DATA,
+ DENALI_PHY_102_DATA,
+ DENALI_PHY_103_DATA,
+ DENALI_PHY_104_DATA,
+ DENALI_PHY_105_DATA,
+ DENALI_PHY_106_DATA,
+ DENALI_PHY_107_DATA,
+ DENALI_PHY_108_DATA,
+ DENALI_PHY_109_DATA,
+ DENALI_PHY_110_DATA,
+ DENALI_PHY_111_DATA,
+ DENALI_PHY_112_DATA,
+ DENALI_PHY_113_DATA,
+ DENALI_PHY_114_DATA,
+ DENALI_PHY_115_DATA,
+ DENALI_PHY_116_DATA,
+ DENALI_PHY_117_DATA,
+ DENALI_PHY_118_DATA,
+ DENALI_PHY_119_DATA,
+ DENALI_PHY_120_DATA,
+ DENALI_PHY_121_DATA,
+ DENALI_PHY_122_DATA,
+ DENALI_PHY_123_DATA,
+ DENALI_PHY_124_DATA,
+ DENALI_PHY_125_DATA,
+ DENALI_PHY_126_DATA,
+ DENALI_PHY_127_DATA,
+ DENALI_PHY_128_DATA,
+ DENALI_PHY_129_DATA,
+ DENALI_PHY_130_DATA,
+ DENALI_PHY_131_DATA,
+ DENALI_PHY_132_DATA,
+ DENALI_PHY_133_DATA,
+ DENALI_PHY_134_DATA,
+ DENALI_PHY_135_DATA,
+ DENALI_PHY_136_DATA,
+ DENALI_PHY_137_DATA,
+ DENALI_PHY_138_DATA,
+ DENALI_PHY_139_DATA,
+ DENALI_PHY_140_DATA,
+ DENALI_PHY_141_DATA,
+ DENALI_PHY_142_DATA,
+ DENALI_PHY_143_DATA,
+ DENALI_PHY_144_DATA,
+ DENALI_PHY_145_DATA,
+ DENALI_PHY_146_DATA,
+ DENALI_PHY_147_DATA,
+ DENALI_PHY_148_DATA,
+ DENALI_PHY_149_DATA,
+ DENALI_PHY_150_DATA,
+ DENALI_PHY_151_DATA,
+ DENALI_PHY_152_DATA,
+ DENALI_PHY_153_DATA,
+ DENALI_PHY_154_DATA,
+ DENALI_PHY_155_DATA,
+ DENALI_PHY_156_DATA,
+ DENALI_PHY_157_DATA,
+ DENALI_PHY_158_DATA,
+ DENALI_PHY_159_DATA,
+ DENALI_PHY_160_DATA,
+ DENALI_PHY_161_DATA,
+ DENALI_PHY_162_DATA,
+ DENALI_PHY_163_DATA,
+ DENALI_PHY_164_DATA,
+ DENALI_PHY_165_DATA,
+ DENALI_PHY_166_DATA,
+ DENALI_PHY_167_DATA,
+ DENALI_PHY_168_DATA,
+ DENALI_PHY_169_DATA,
+ DENALI_PHY_170_DATA,
+ DENALI_PHY_171_DATA,
+ DENALI_PHY_172_DATA,
+ DENALI_PHY_173_DATA,
+ DENALI_PHY_174_DATA,
+ DENALI_PHY_175_DATA,
+ DENALI_PHY_176_DATA,
+ DENALI_PHY_177_DATA,
+ DENALI_PHY_178_DATA,
+ DENALI_PHY_179_DATA,
+ DENALI_PHY_180_DATA,
+ DENALI_PHY_181_DATA,
+ DENALI_PHY_182_DATA,
+ DENALI_PHY_183_DATA,
+ DENALI_PHY_184_DATA,
+ DENALI_PHY_185_DATA,
+ DENALI_PHY_186_DATA,
+ DENALI_PHY_187_DATA,
+ DENALI_PHY_188_DATA,
+ DENALI_PHY_189_DATA,
+ DENALI_PHY_190_DATA,
+ DENALI_PHY_191_DATA,
+ DENALI_PHY_192_DATA,
+ DENALI_PHY_193_DATA,
+ DENALI_PHY_194_DATA,
+ DENALI_PHY_195_DATA,
+ DENALI_PHY_196_DATA,
+ DENALI_PHY_197_DATA,
+ DENALI_PHY_198_DATA,
+ DENALI_PHY_199_DATA,
+ DENALI_PHY_200_DATA,
+ DENALI_PHY_201_DATA,
+ DENALI_PHY_202_DATA,
+ DENALI_PHY_203_DATA,
+ DENALI_PHY_204_DATA,
+ DENALI_PHY_205_DATA,
+ DENALI_PHY_206_DATA,
+ DENALI_PHY_207_DATA,
+ DENALI_PHY_208_DATA,
+ DENALI_PHY_209_DATA,
+ DENALI_PHY_210_DATA,
+ DENALI_PHY_211_DATA,
+ DENALI_PHY_212_DATA,
+ DENALI_PHY_213_DATA,
+ DENALI_PHY_214_DATA,
+ DENALI_PHY_215_DATA,
+ DENALI_PHY_216_DATA,
+ DENALI_PHY_217_DATA,
+ DENALI_PHY_218_DATA,
+ DENALI_PHY_219_DATA,
+ DENALI_PHY_220_DATA,
+ DENALI_PHY_221_DATA,
+ DENALI_PHY_222_DATA,
+ DENALI_PHY_223_DATA,
+ DENALI_PHY_224_DATA,
+ DENALI_PHY_225_DATA,
+ DENALI_PHY_226_DATA,
+ DENALI_PHY_227_DATA,
+ DENALI_PHY_228_DATA,
+ DENALI_PHY_229_DATA,
+ DENALI_PHY_230_DATA,
+ DENALI_PHY_231_DATA,
+ DENALI_PHY_232_DATA,
+ DENALI_PHY_233_DATA,
+ DENALI_PHY_234_DATA,
+ DENALI_PHY_235_DATA,
+ DENALI_PHY_236_DATA,
+ DENALI_PHY_237_DATA,
+ DENALI_PHY_238_DATA,
+ DENALI_PHY_239_DATA,
+ DENALI_PHY_240_DATA,
+ DENALI_PHY_241_DATA,
+ DENALI_PHY_242_DATA,
+ DENALI_PHY_243_DATA,
+ DENALI_PHY_244_DATA,
+ DENALI_PHY_245_DATA,
+ DENALI_PHY_246_DATA,
+ DENALI_PHY_247_DATA,
+ DENALI_PHY_248_DATA,
+ DENALI_PHY_249_DATA,
+ DENALI_PHY_250_DATA,
+ DENALI_PHY_251_DATA,
+ DENALI_PHY_252_DATA,
+ DENALI_PHY_253_DATA,
+ DENALI_PHY_254_DATA,
+ DENALI_PHY_255_DATA,
+ DENALI_PHY_256_DATA,
+ DENALI_PHY_257_DATA,
+ DENALI_PHY_258_DATA,
+ DENALI_PHY_259_DATA,
+ DENALI_PHY_260_DATA,
+ DENALI_PHY_261_DATA,
+ DENALI_PHY_262_DATA,
+ DENALI_PHY_263_DATA,
+ DENALI_PHY_264_DATA,
+ DENALI_PHY_265_DATA,
+ DENALI_PHY_266_DATA,
+ DENALI_PHY_267_DATA,
+ DENALI_PHY_268_DATA,
+ DENALI_PHY_269_DATA,
+ DENALI_PHY_270_DATA,
+ DENALI_PHY_271_DATA,
+ DENALI_PHY_272_DATA,
+ DENALI_PHY_273_DATA,
+ DENALI_PHY_274_DATA,
+ DENALI_PHY_275_DATA,
+ DENALI_PHY_276_DATA,
+ DENALI_PHY_277_DATA,
+ DENALI_PHY_278_DATA,
+ DENALI_PHY_279_DATA,
+ DENALI_PHY_280_DATA,
+ DENALI_PHY_281_DATA,
+ DENALI_PHY_282_DATA,
+ DENALI_PHY_283_DATA,
+ DENALI_PHY_284_DATA,
+ DENALI_PHY_285_DATA,
+ DENALI_PHY_286_DATA,
+ DENALI_PHY_287_DATA,
+ DENALI_PHY_288_DATA,
+ DENALI_PHY_289_DATA,
+ DENALI_PHY_290_DATA,
+ DENALI_PHY_291_DATA,
+ DENALI_PHY_292_DATA,
+ DENALI_PHY_293_DATA,
+ DENALI_PHY_294_DATA,
+ DENALI_PHY_295_DATA,
+ DENALI_PHY_296_DATA,
+ DENALI_PHY_297_DATA,
+ DENALI_PHY_298_DATA,
+ DENALI_PHY_299_DATA,
+ DENALI_PHY_300_DATA,
+ DENALI_PHY_301_DATA,
+ DENALI_PHY_302_DATA,
+ DENALI_PHY_303_DATA,
+ DENALI_PHY_304_DATA,
+ DENALI_PHY_305_DATA,
+ DENALI_PHY_306_DATA,
+ DENALI_PHY_307_DATA,
+ DENALI_PHY_308_DATA,
+ DENALI_PHY_309_DATA,
+ DENALI_PHY_310_DATA,
+ DENALI_PHY_311_DATA,
+ DENALI_PHY_312_DATA,
+ DENALI_PHY_313_DATA,
+ DENALI_PHY_314_DATA,
+ DENALI_PHY_315_DATA,
+ DENALI_PHY_316_DATA,
+ DENALI_PHY_317_DATA,
+ DENALI_PHY_318_DATA,
+ DENALI_PHY_319_DATA,
+ DENALI_PHY_320_DATA,
+ DENALI_PHY_321_DATA,
+ DENALI_PHY_322_DATA,
+ DENALI_PHY_323_DATA,
+ DENALI_PHY_324_DATA,
+ DENALI_PHY_325_DATA,
+ DENALI_PHY_326_DATA,
+ DENALI_PHY_327_DATA,
+ DENALI_PHY_328_DATA,
+ DENALI_PHY_329_DATA,
+ DENALI_PHY_330_DATA,
+ DENALI_PHY_331_DATA,
+ DENALI_PHY_332_DATA,
+ DENALI_PHY_333_DATA,
+ DENALI_PHY_334_DATA,
+ DENALI_PHY_335_DATA,
+ DENALI_PHY_336_DATA,
+ DENALI_PHY_337_DATA,
+ DENALI_PHY_338_DATA,
+ DENALI_PHY_339_DATA,
+ DENALI_PHY_340_DATA,
+ DENALI_PHY_341_DATA,
+ DENALI_PHY_342_DATA,
+ DENALI_PHY_343_DATA,
+ DENALI_PHY_344_DATA,
+ DENALI_PHY_345_DATA,
+ DENALI_PHY_346_DATA,
+ DENALI_PHY_347_DATA,
+ DENALI_PHY_348_DATA,
+ DENALI_PHY_349_DATA,
+ DENALI_PHY_350_DATA,
+ DENALI_PHY_351_DATA,
+ DENALI_PHY_352_DATA,
+ DENALI_PHY_353_DATA,
+ DENALI_PHY_354_DATA,
+ DENALI_PHY_355_DATA,
+ DENALI_PHY_356_DATA,
+ DENALI_PHY_357_DATA,
+ DENALI_PHY_358_DATA,
+ DENALI_PHY_359_DATA,
+ DENALI_PHY_360_DATA,
+ DENALI_PHY_361_DATA,
+ DENALI_PHY_362_DATA,
+ DENALI_PHY_363_DATA,
+ DENALI_PHY_364_DATA,
+ DENALI_PHY_365_DATA,
+ DENALI_PHY_366_DATA,
+ DENALI_PHY_367_DATA,
+ DENALI_PHY_368_DATA,
+ DENALI_PHY_369_DATA,
+ DENALI_PHY_370_DATA,
+ DENALI_PHY_371_DATA,
+ DENALI_PHY_372_DATA,
+ DENALI_PHY_373_DATA,
+ DENALI_PHY_374_DATA,
+ DENALI_PHY_375_DATA,
+ DENALI_PHY_376_DATA,
+ DENALI_PHY_377_DATA,
+ DENALI_PHY_378_DATA,
+ DENALI_PHY_379_DATA,
+ DENALI_PHY_380_DATA,
+ DENALI_PHY_381_DATA,
+ DENALI_PHY_382_DATA,
+ DENALI_PHY_383_DATA,
+ DENALI_PHY_384_DATA,
+ DENALI_PHY_385_DATA,
+ DENALI_PHY_386_DATA,
+ DENALI_PHY_387_DATA,
+ DENALI_PHY_388_DATA,
+ DENALI_PHY_389_DATA,
+ DENALI_PHY_390_DATA,
+ DENALI_PHY_391_DATA,
+ DENALI_PHY_392_DATA,
+ DENALI_PHY_393_DATA,
+ DENALI_PHY_394_DATA,
+ DENALI_PHY_395_DATA,
+ DENALI_PHY_396_DATA,
+ DENALI_PHY_397_DATA,
+ DENALI_PHY_398_DATA,
+ DENALI_PHY_399_DATA,
+ DENALI_PHY_400_DATA,
+ DENALI_PHY_401_DATA,
+ DENALI_PHY_402_DATA,
+ DENALI_PHY_403_DATA,
+ DENALI_PHY_404_DATA,
+ DENALI_PHY_405_DATA,
+ DENALI_PHY_406_DATA,
+ DENALI_PHY_407_DATA,
+ DENALI_PHY_408_DATA,
+ DENALI_PHY_409_DATA,
+ DENALI_PHY_410_DATA,
+ DENALI_PHY_411_DATA,
+ DENALI_PHY_412_DATA,
+ DENALI_PHY_413_DATA,
+ DENALI_PHY_414_DATA,
+ DENALI_PHY_415_DATA,
+ DENALI_PHY_416_DATA,
+ DENALI_PHY_417_DATA,
+ DENALI_PHY_418_DATA,
+ DENALI_PHY_419_DATA,
+ DENALI_PHY_420_DATA,
+ DENALI_PHY_421_DATA,
+ DENALI_PHY_422_DATA,
+ DENALI_PHY_423_DATA,
+ DENALI_PHY_424_DATA,
+ DENALI_PHY_425_DATA,
+ DENALI_PHY_426_DATA,
+ DENALI_PHY_427_DATA,
+ DENALI_PHY_428_DATA,
+ DENALI_PHY_429_DATA,
+ DENALI_PHY_430_DATA,
+ DENALI_PHY_431_DATA,
+ DENALI_PHY_432_DATA,
+ DENALI_PHY_433_DATA,
+ DENALI_PHY_434_DATA,
+ DENALI_PHY_435_DATA,
+ DENALI_PHY_436_DATA,
+ DENALI_PHY_437_DATA,
+ DENALI_PHY_438_DATA,
+ DENALI_PHY_439_DATA,
+ DENALI_PHY_440_DATA,
+ DENALI_PHY_441_DATA,
+ DENALI_PHY_442_DATA,
+ DENALI_PHY_443_DATA,
+ DENALI_PHY_444_DATA,
+ DENALI_PHY_445_DATA,
+ DENALI_PHY_446_DATA,
+ DENALI_PHY_447_DATA,
+ DENALI_PHY_448_DATA,
+ DENALI_PHY_449_DATA,
+ DENALI_PHY_450_DATA,
+ DENALI_PHY_451_DATA,
+ DENALI_PHY_452_DATA,
+ DENALI_PHY_453_DATA,
+ DENALI_PHY_454_DATA,
+ DENALI_PHY_455_DATA,
+ DENALI_PHY_456_DATA,
+ DENALI_PHY_457_DATA,
+ DENALI_PHY_458_DATA,
+ DENALI_PHY_459_DATA,
+ DENALI_PHY_460_DATA,
+ DENALI_PHY_461_DATA,
+ DENALI_PHY_462_DATA,
+ DENALI_PHY_463_DATA,
+ DENALI_PHY_464_DATA,
+ DENALI_PHY_465_DATA,
+ DENALI_PHY_466_DATA,
+ DENALI_PHY_467_DATA,
+ DENALI_PHY_468_DATA,
+ DENALI_PHY_469_DATA,
+ DENALI_PHY_470_DATA,
+ DENALI_PHY_471_DATA,
+ DENALI_PHY_472_DATA,
+ DENALI_PHY_473_DATA,
+ DENALI_PHY_474_DATA,
+ DENALI_PHY_475_DATA,
+ DENALI_PHY_476_DATA,
+ DENALI_PHY_477_DATA,
+ DENALI_PHY_478_DATA,
+ DENALI_PHY_479_DATA,
+ DENALI_PHY_480_DATA,
+ DENALI_PHY_481_DATA,
+ DENALI_PHY_482_DATA,
+ DENALI_PHY_483_DATA,
+ DENALI_PHY_484_DATA,
+ DENALI_PHY_485_DATA,
+ DENALI_PHY_486_DATA,
+ DENALI_PHY_487_DATA,
+ DENALI_PHY_488_DATA,
+ DENALI_PHY_489_DATA,
+ DENALI_PHY_490_DATA,
+ DENALI_PHY_491_DATA,
+ DENALI_PHY_492_DATA,
+ DENALI_PHY_493_DATA,
+ DENALI_PHY_494_DATA,
+ DENALI_PHY_495_DATA,
+ DENALI_PHY_496_DATA,
+ DENALI_PHY_497_DATA,
+ DENALI_PHY_498_DATA,
+ DENALI_PHY_499_DATA,
+ DENALI_PHY_500_DATA,
+ DENALI_PHY_501_DATA,
+ DENALI_PHY_502_DATA,
+ DENALI_PHY_503_DATA,
+ DENALI_PHY_504_DATA,
+ DENALI_PHY_505_DATA,
+ DENALI_PHY_506_DATA,
+ DENALI_PHY_507_DATA,
+ DENALI_PHY_508_DATA,
+ DENALI_PHY_509_DATA,
+ DENALI_PHY_510_DATA,
+ DENALI_PHY_511_DATA,
+ DENALI_PHY_512_DATA,
+ DENALI_PHY_513_DATA,
+ DENALI_PHY_514_DATA,
+ DENALI_PHY_515_DATA,
+ DENALI_PHY_516_DATA,
+ DENALI_PHY_517_DATA,
+ DENALI_PHY_518_DATA,
+ DENALI_PHY_519_DATA,
+ DENALI_PHY_520_DATA,
+ DENALI_PHY_521_DATA,
+ DENALI_PHY_522_DATA,
+ DENALI_PHY_523_DATA,
+ DENALI_PHY_524_DATA,
+ DENALI_PHY_525_DATA,
+ DENALI_PHY_526_DATA,
+ DENALI_PHY_527_DATA,
+ DENALI_PHY_528_DATA,
+ DENALI_PHY_529_DATA,
+ DENALI_PHY_530_DATA,
+ DENALI_PHY_531_DATA,
+ DENALI_PHY_532_DATA,
+ DENALI_PHY_533_DATA,
+ DENALI_PHY_534_DATA,
+ DENALI_PHY_535_DATA,
+ DENALI_PHY_536_DATA,
+ DENALI_PHY_537_DATA,
+ DENALI_PHY_538_DATA,
+ DENALI_PHY_539_DATA,
+ DENALI_PHY_540_DATA,
+ DENALI_PHY_541_DATA,
+ DENALI_PHY_542_DATA,
+ DENALI_PHY_543_DATA,
+ DENALI_PHY_544_DATA,
+ DENALI_PHY_545_DATA,
+ DENALI_PHY_546_DATA,
+ DENALI_PHY_547_DATA,
+ DENALI_PHY_548_DATA,
+ DENALI_PHY_549_DATA,
+ DENALI_PHY_550_DATA,
+ DENALI_PHY_551_DATA,
+ DENALI_PHY_552_DATA,
+ DENALI_PHY_553_DATA,
+ DENALI_PHY_554_DATA,
+ DENALI_PHY_555_DATA,
+ DENALI_PHY_556_DATA,
+ DENALI_PHY_557_DATA,
+ DENALI_PHY_558_DATA,
+ DENALI_PHY_559_DATA,
+ DENALI_PHY_560_DATA,
+ DENALI_PHY_561_DATA,
+ DENALI_PHY_562_DATA,
+ DENALI_PHY_563_DATA,
+ DENALI_PHY_564_DATA,
+ DENALI_PHY_565_DATA,
+ DENALI_PHY_566_DATA,
+ DENALI_PHY_567_DATA,
+ DENALI_PHY_568_DATA,
+ DENALI_PHY_569_DATA,
+ DENALI_PHY_570_DATA,
+ DENALI_PHY_571_DATA,
+ DENALI_PHY_572_DATA,
+ DENALI_PHY_573_DATA,
+ DENALI_PHY_574_DATA,
+ DENALI_PHY_575_DATA,
+ DENALI_PHY_576_DATA,
+ DENALI_PHY_577_DATA,
+ DENALI_PHY_578_DATA,
+ DENALI_PHY_579_DATA,
+ DENALI_PHY_580_DATA,
+ DENALI_PHY_581_DATA,
+ DENALI_PHY_582_DATA,
+ DENALI_PHY_583_DATA,
+ DENALI_PHY_584_DATA,
+ DENALI_PHY_585_DATA,
+ DENALI_PHY_586_DATA,
+ DENALI_PHY_587_DATA,
+ DENALI_PHY_588_DATA,
+ DENALI_PHY_589_DATA,
+ DENALI_PHY_590_DATA,
+ DENALI_PHY_591_DATA,
+ DENALI_PHY_592_DATA,
+ DENALI_PHY_593_DATA,
+ DENALI_PHY_594_DATA,
+ DENALI_PHY_595_DATA,
+ DENALI_PHY_596_DATA,
+ DENALI_PHY_597_DATA,
+ DENALI_PHY_598_DATA,
+ DENALI_PHY_599_DATA,
+ DENALI_PHY_600_DATA,
+ DENALI_PHY_601_DATA,
+ DENALI_PHY_602_DATA,
+ DENALI_PHY_603_DATA,
+ DENALI_PHY_604_DATA,
+ DENALI_PHY_605_DATA,
+ DENALI_PHY_606_DATA,
+ DENALI_PHY_607_DATA,
+ DENALI_PHY_608_DATA,
+ DENALI_PHY_609_DATA,
+ DENALI_PHY_610_DATA,
+ DENALI_PHY_611_DATA,
+ DENALI_PHY_612_DATA,
+ DENALI_PHY_613_DATA,
+ DENALI_PHY_614_DATA,
+ DENALI_PHY_615_DATA,
+ DENALI_PHY_616_DATA,
+ DENALI_PHY_617_DATA,
+ DENALI_PHY_618_DATA,
+ DENALI_PHY_619_DATA,
+ DENALI_PHY_620_DATA,
+ DENALI_PHY_621_DATA,
+ DENALI_PHY_622_DATA,
+ DENALI_PHY_623_DATA,
+ DENALI_PHY_624_DATA,
+ DENALI_PHY_625_DATA,
+ DENALI_PHY_626_DATA,
+ DENALI_PHY_627_DATA,
+ DENALI_PHY_628_DATA,
+ DENALI_PHY_629_DATA,
+ DENALI_PHY_630_DATA,
+ DENALI_PHY_631_DATA,
+ DENALI_PHY_632_DATA,
+ DENALI_PHY_633_DATA,
+ DENALI_PHY_634_DATA,
+ DENALI_PHY_635_DATA,
+ DENALI_PHY_636_DATA,
+ DENALI_PHY_637_DATA,
+ DENALI_PHY_638_DATA,
+ DENALI_PHY_639_DATA,
+ DENALI_PHY_640_DATA,
+ DENALI_PHY_641_DATA,
+ DENALI_PHY_642_DATA,
+ DENALI_PHY_643_DATA,
+ DENALI_PHY_644_DATA,
+ DENALI_PHY_645_DATA,
+ DENALI_PHY_646_DATA,
+ DENALI_PHY_647_DATA,
+ DENALI_PHY_648_DATA,
+ DENALI_PHY_649_DATA,
+ DENALI_PHY_650_DATA,
+ DENALI_PHY_651_DATA,
+ DENALI_PHY_652_DATA,
+ DENALI_PHY_653_DATA,
+ DENALI_PHY_654_DATA,
+ DENALI_PHY_655_DATA,
+ DENALI_PHY_656_DATA,
+ DENALI_PHY_657_DATA,
+ DENALI_PHY_658_DATA,
+ DENALI_PHY_659_DATA,
+ DENALI_PHY_660_DATA,
+ DENALI_PHY_661_DATA,
+ DENALI_PHY_662_DATA,
+ DENALI_PHY_663_DATA,
+ DENALI_PHY_664_DATA,
+ DENALI_PHY_665_DATA,
+ DENALI_PHY_666_DATA,
+ DENALI_PHY_667_DATA,
+ DENALI_PHY_668_DATA,
+ DENALI_PHY_669_DATA,
+ DENALI_PHY_670_DATA,
+ DENALI_PHY_671_DATA,
+ DENALI_PHY_672_DATA,
+ DENALI_PHY_673_DATA,
+ DENALI_PHY_674_DATA,
+ DENALI_PHY_675_DATA,
+ DENALI_PHY_676_DATA,
+ DENALI_PHY_677_DATA,
+ DENALI_PHY_678_DATA,
+ DENALI_PHY_679_DATA,
+ DENALI_PHY_680_DATA,
+ DENALI_PHY_681_DATA,
+ DENALI_PHY_682_DATA,
+ DENALI_PHY_683_DATA,
+ DENALI_PHY_684_DATA,
+ DENALI_PHY_685_DATA,
+ DENALI_PHY_686_DATA,
+ DENALI_PHY_687_DATA,
+ DENALI_PHY_688_DATA,
+ DENALI_PHY_689_DATA,
+ DENALI_PHY_690_DATA,
+ DENALI_PHY_691_DATA,
+ DENALI_PHY_692_DATA,
+ DENALI_PHY_693_DATA,
+ DENALI_PHY_694_DATA,
+ DENALI_PHY_695_DATA,
+ DENALI_PHY_696_DATA,
+ DENALI_PHY_697_DATA,
+ DENALI_PHY_698_DATA,
+ DENALI_PHY_699_DATA,
+ DENALI_PHY_700_DATA,
+ DENALI_PHY_701_DATA,
+ DENALI_PHY_702_DATA,
+ DENALI_PHY_703_DATA,
+ DENALI_PHY_704_DATA,
+ DENALI_PHY_705_DATA,
+ DENALI_PHY_706_DATA,
+ DENALI_PHY_707_DATA,
+ DENALI_PHY_708_DATA,
+ DENALI_PHY_709_DATA,
+ DENALI_PHY_710_DATA,
+ DENALI_PHY_711_DATA,
+ DENALI_PHY_712_DATA,
+ DENALI_PHY_713_DATA,
+ DENALI_PHY_714_DATA,
+ DENALI_PHY_715_DATA,
+ DENALI_PHY_716_DATA,
+ DENALI_PHY_717_DATA,
+ DENALI_PHY_718_DATA,
+ DENALI_PHY_719_DATA,
+ DENALI_PHY_720_DATA,
+ DENALI_PHY_721_DATA,
+ DENALI_PHY_722_DATA,
+ DENALI_PHY_723_DATA,
+ DENALI_PHY_724_DATA,
+ DENALI_PHY_725_DATA,
+ DENALI_PHY_726_DATA,
+ DENALI_PHY_727_DATA,
+ DENALI_PHY_728_DATA,
+ DENALI_PHY_729_DATA,
+ DENALI_PHY_730_DATA,
+ DENALI_PHY_731_DATA,
+ DENALI_PHY_732_DATA,
+ DENALI_PHY_733_DATA,
+ DENALI_PHY_734_DATA,
+ DENALI_PHY_735_DATA,
+ DENALI_PHY_736_DATA,
+ DENALI_PHY_737_DATA,
+ DENALI_PHY_738_DATA,
+ DENALI_PHY_739_DATA,
+ DENALI_PHY_740_DATA,
+ DENALI_PHY_741_DATA,
+ DENALI_PHY_742_DATA,
+ DENALI_PHY_743_DATA,
+ DENALI_PHY_744_DATA,
+ DENALI_PHY_745_DATA,
+ DENALI_PHY_746_DATA,
+ DENALI_PHY_747_DATA,
+ DENALI_PHY_748_DATA,
+ DENALI_PHY_749_DATA,
+ DENALI_PHY_750_DATA,
+ DENALI_PHY_751_DATA,
+ DENALI_PHY_752_DATA,
+ DENALI_PHY_753_DATA,
+ DENALI_PHY_754_DATA,
+ DENALI_PHY_755_DATA,
+ DENALI_PHY_756_DATA,
+ DENALI_PHY_757_DATA,
+ DENALI_PHY_758_DATA,
+ DENALI_PHY_759_DATA,
+ DENALI_PHY_760_DATA,
+ DENALI_PHY_761_DATA,
+ DENALI_PHY_762_DATA,
+ DENALI_PHY_763_DATA,
+ DENALI_PHY_764_DATA,
+ DENALI_PHY_765_DATA,
+ DENALI_PHY_766_DATA,
+ DENALI_PHY_767_DATA,
+ DENALI_PHY_768_DATA,
+ DENALI_PHY_769_DATA,
+ DENALI_PHY_770_DATA,
+ DENALI_PHY_771_DATA,
+ DENALI_PHY_772_DATA,
+ DENALI_PHY_773_DATA,
+ DENALI_PHY_774_DATA,
+ DENALI_PHY_775_DATA,
+ DENALI_PHY_776_DATA,
+ DENALI_PHY_777_DATA,
+ DENALI_PHY_778_DATA,
+ DENALI_PHY_779_DATA,
+ DENALI_PHY_780_DATA,
+ DENALI_PHY_781_DATA,
+ DENALI_PHY_782_DATA,
+ DENALI_PHY_783_DATA,
+ DENALI_PHY_784_DATA,
+ DENALI_PHY_785_DATA,
+ DENALI_PHY_786_DATA,
+ DENALI_PHY_787_DATA,
+ DENALI_PHY_788_DATA,
+ DENALI_PHY_789_DATA,
+ DENALI_PHY_790_DATA,
+ DENALI_PHY_791_DATA,
+ DENALI_PHY_792_DATA,
+ DENALI_PHY_793_DATA,
+ DENALI_PHY_794_DATA,
+ DENALI_PHY_795_DATA,
+ DENALI_PHY_796_DATA,
+ DENALI_PHY_797_DATA,
+ DENALI_PHY_798_DATA,
+ DENALI_PHY_799_DATA,
+ DENALI_PHY_800_DATA,
+ DENALI_PHY_801_DATA,
+ DENALI_PHY_802_DATA,
+ DENALI_PHY_803_DATA,
+ DENALI_PHY_804_DATA,
+ DENALI_PHY_805_DATA,
+ DENALI_PHY_806_DATA,
+ DENALI_PHY_807_DATA,
+ DENALI_PHY_808_DATA,
+ DENALI_PHY_809_DATA,
+ DENALI_PHY_810_DATA,
+ DENALI_PHY_811_DATA,
+ DENALI_PHY_812_DATA,
+ DENALI_PHY_813_DATA,
+ DENALI_PHY_814_DATA,
+ DENALI_PHY_815_DATA,
+ DENALI_PHY_816_DATA,
+ DENALI_PHY_817_DATA,
+ DENALI_PHY_818_DATA,
+ DENALI_PHY_819_DATA,
+ DENALI_PHY_820_DATA,
+ DENALI_PHY_821_DATA,
+ DENALI_PHY_822_DATA,
+ DENALI_PHY_823_DATA,
+ DENALI_PHY_824_DATA,
+ DENALI_PHY_825_DATA,
+ DENALI_PHY_826_DATA,
+ DENALI_PHY_827_DATA,
+ DENALI_PHY_828_DATA,
+ DENALI_PHY_829_DATA,
+ DENALI_PHY_830_DATA,
+ DENALI_PHY_831_DATA,
+ DENALI_PHY_832_DATA,
+ DENALI_PHY_833_DATA,
+ DENALI_PHY_834_DATA,
+ DENALI_PHY_835_DATA,
+ DENALI_PHY_836_DATA,
+ DENALI_PHY_837_DATA,
+ DENALI_PHY_838_DATA,
+ DENALI_PHY_839_DATA,
+ DENALI_PHY_840_DATA,
+ DENALI_PHY_841_DATA,
+ DENALI_PHY_842_DATA,
+ DENALI_PHY_843_DATA,
+ DENALI_PHY_844_DATA,
+ DENALI_PHY_845_DATA,
+ DENALI_PHY_846_DATA,
+ DENALI_PHY_847_DATA,
+ DENALI_PHY_848_DATA,
+ DENALI_PHY_849_DATA,
+ DENALI_PHY_850_DATA,
+ DENALI_PHY_851_DATA,
+ DENALI_PHY_852_DATA,
+ DENALI_PHY_853_DATA,
+ DENALI_PHY_854_DATA,
+ DENALI_PHY_855_DATA,
+ DENALI_PHY_856_DATA,
+ DENALI_PHY_857_DATA,
+ DENALI_PHY_858_DATA,
+ DENALI_PHY_859_DATA,
+ DENALI_PHY_860_DATA,
+ DENALI_PHY_861_DATA,
+ DENALI_PHY_862_DATA,
+ DENALI_PHY_863_DATA,
+ DENALI_PHY_864_DATA,
+ DENALI_PHY_865_DATA,
+ DENALI_PHY_866_DATA,
+ DENALI_PHY_867_DATA,
+ DENALI_PHY_868_DATA,
+ DENALI_PHY_869_DATA,
+ DENALI_PHY_870_DATA,
+ DENALI_PHY_871_DATA,
+ DENALI_PHY_872_DATA,
+ DENALI_PHY_873_DATA,
+ DENALI_PHY_874_DATA,
+ DENALI_PHY_875_DATA,
+ DENALI_PHY_876_DATA,
+ DENALI_PHY_877_DATA,
+ DENALI_PHY_878_DATA,
+ DENALI_PHY_879_DATA,
+ DENALI_PHY_880_DATA,
+ DENALI_PHY_881_DATA,
+ DENALI_PHY_882_DATA,
+ DENALI_PHY_883_DATA,
+ DENALI_PHY_884_DATA,
+ DENALI_PHY_885_DATA,
+ DENALI_PHY_886_DATA,
+ DENALI_PHY_887_DATA,
+ DENALI_PHY_888_DATA,
+ DENALI_PHY_889_DATA,
+ DENALI_PHY_890_DATA,
+ DENALI_PHY_891_DATA,
+ DENALI_PHY_892_DATA,
+ DENALI_PHY_893_DATA,
+ DENALI_PHY_894_DATA,
+ DENALI_PHY_895_DATA,
+ DENALI_PHY_896_DATA,
+ DENALI_PHY_897_DATA,
+ DENALI_PHY_898_DATA,
+ DENALI_PHY_899_DATA,
+ DENALI_PHY_900_DATA,
+ DENALI_PHY_901_DATA,
+ DENALI_PHY_902_DATA,
+ DENALI_PHY_903_DATA,
+ DENALI_PHY_904_DATA,
+ DENALI_PHY_905_DATA,
+ DENALI_PHY_906_DATA,
+ DENALI_PHY_907_DATA,
+ DENALI_PHY_908_DATA,
+ DENALI_PHY_909_DATA,
+ DENALI_PHY_910_DATA,
+ DENALI_PHY_911_DATA,
+ DENALI_PHY_912_DATA,
+ DENALI_PHY_913_DATA,
+ DENALI_PHY_914_DATA,
+ DENALI_PHY_915_DATA,
+ DENALI_PHY_916_DATA,
+ DENALI_PHY_917_DATA,
+ DENALI_PHY_918_DATA,
+ DENALI_PHY_919_DATA,
+ DENALI_PHY_920_DATA,
+ DENALI_PHY_921_DATA,
+ DENALI_PHY_922_DATA,
+ DENALI_PHY_923_DATA,
+ DENALI_PHY_924_DATA,
+ DENALI_PHY_925_DATA,
+ DENALI_PHY_926_DATA,
+ DENALI_PHY_927_DATA,
+ DENALI_PHY_928_DATA,
+ DENALI_PHY_929_DATA,
+ DENALI_PHY_930_DATA,
+ DENALI_PHY_931_DATA,
+ DENALI_PHY_932_DATA,
+ DENALI_PHY_933_DATA,
+ DENALI_PHY_934_DATA,
+ DENALI_PHY_935_DATA,
+ DENALI_PHY_936_DATA,
+ DENALI_PHY_937_DATA,
+ DENALI_PHY_938_DATA,
+ DENALI_PHY_939_DATA,
+ DENALI_PHY_940_DATA,
+ DENALI_PHY_941_DATA,
+ DENALI_PHY_942_DATA,
+ DENALI_PHY_943_DATA,
+ DENALI_PHY_944_DATA,
+ DENALI_PHY_945_DATA,
+ DENALI_PHY_946_DATA,
+ DENALI_PHY_947_DATA,
+ DENALI_PHY_948_DATA,
+ DENALI_PHY_949_DATA,
+ DENALI_PHY_950_DATA,
+ DENALI_PHY_951_DATA,
+ DENALI_PHY_952_DATA,
+ DENALI_PHY_953_DATA,
+ DENALI_PHY_954_DATA,
+ DENALI_PHY_955_DATA,
+ DENALI_PHY_956_DATA,
+ DENALI_PHY_957_DATA,
+ DENALI_PHY_958_DATA,
+ DENALI_PHY_959_DATA,
+ DENALI_PHY_960_DATA,
+ DENALI_PHY_961_DATA,
+ DENALI_PHY_962_DATA,
+ DENALI_PHY_963_DATA,
+ DENALI_PHY_964_DATA,
+ DENALI_PHY_965_DATA,
+ DENALI_PHY_966_DATA,
+ DENALI_PHY_967_DATA,
+ DENALI_PHY_968_DATA,
+ DENALI_PHY_969_DATA,
+ DENALI_PHY_970_DATA,
+ DENALI_PHY_971_DATA,
+ DENALI_PHY_972_DATA,
+ DENALI_PHY_973_DATA,
+ DENALI_PHY_974_DATA,
+ DENALI_PHY_975_DATA,
+ DENALI_PHY_976_DATA,
+ DENALI_PHY_977_DATA,
+ DENALI_PHY_978_DATA,
+ DENALI_PHY_979_DATA,
+ DENALI_PHY_980_DATA,
+ DENALI_PHY_981_DATA,
+ DENALI_PHY_982_DATA,
+ DENALI_PHY_983_DATA,
+ DENALI_PHY_984_DATA,
+ DENALI_PHY_985_DATA,
+ DENALI_PHY_986_DATA,
+ DENALI_PHY_987_DATA,
+ DENALI_PHY_988_DATA,
+ DENALI_PHY_989_DATA,
+ DENALI_PHY_990_DATA,
+ DENALI_PHY_991_DATA,
+ DENALI_PHY_992_DATA,
+ DENALI_PHY_993_DATA,
+ DENALI_PHY_994_DATA,
+ DENALI_PHY_995_DATA,
+ DENALI_PHY_996_DATA,
+ DENALI_PHY_997_DATA,
+ DENALI_PHY_998_DATA,
+ DENALI_PHY_999_DATA,
+ DENALI_PHY_1000_DATA,
+ DENALI_PHY_1001_DATA,
+ DENALI_PHY_1002_DATA,
+ DENALI_PHY_1003_DATA,
+ DENALI_PHY_1004_DATA,
+ DENALI_PHY_1005_DATA,
+ DENALI_PHY_1006_DATA,
+ DENALI_PHY_1007_DATA,
+ DENALI_PHY_1008_DATA,
+ DENALI_PHY_1009_DATA,
+ DENALI_PHY_1010_DATA,
+ DENALI_PHY_1011_DATA,
+ DENALI_PHY_1012_DATA,
+ DENALI_PHY_1013_DATA,
+ DENALI_PHY_1014_DATA,
+ DENALI_PHY_1015_DATA,
+ DENALI_PHY_1016_DATA,
+ DENALI_PHY_1017_DATA,
+ DENALI_PHY_1018_DATA,
+ DENALI_PHY_1019_DATA,
+ DENALI_PHY_1020_DATA,
+ DENALI_PHY_1021_DATA,
+ DENALI_PHY_1022_DATA,
+ DENALI_PHY_1023_DATA,
+ DENALI_PHY_1024_DATA,
+ DENALI_PHY_1025_DATA,
+ DENALI_PHY_1026_DATA,
+ DENALI_PHY_1027_DATA,
+ DENALI_PHY_1028_DATA,
+ DENALI_PHY_1029_DATA,
+ DENALI_PHY_1030_DATA,
+ DENALI_PHY_1031_DATA,
+ DENALI_PHY_1032_DATA,
+ DENALI_PHY_1033_DATA,
+ DENALI_PHY_1034_DATA,
+ DENALI_PHY_1035_DATA,
+ DENALI_PHY_1036_DATA,
+ DENALI_PHY_1037_DATA,
+ DENALI_PHY_1038_DATA,
+ DENALI_PHY_1039_DATA,
+ DENALI_PHY_1040_DATA,
+ DENALI_PHY_1041_DATA,
+ DENALI_PHY_1042_DATA,
+ DENALI_PHY_1043_DATA,
+ DENALI_PHY_1044_DATA,
+ DENALI_PHY_1045_DATA,
+ DENALI_PHY_1046_DATA,
+ DENALI_PHY_1047_DATA,
+ DENALI_PHY_1048_DATA,
+ DENALI_PHY_1049_DATA,
+ DENALI_PHY_1050_DATA,
+ DENALI_PHY_1051_DATA,
+ DENALI_PHY_1052_DATA,
+ DENALI_PHY_1053_DATA,
+ DENALI_PHY_1054_DATA,
+ DENALI_PHY_1055_DATA,
+ DENALI_PHY_1056_DATA,
+ DENALI_PHY_1057_DATA,
+ DENALI_PHY_1058_DATA,
+ DENALI_PHY_1059_DATA,
+ DENALI_PHY_1060_DATA,
+ DENALI_PHY_1061_DATA,
+ DENALI_PHY_1062_DATA,
+ DENALI_PHY_1063_DATA,
+ DENALI_PHY_1064_DATA,
+ DENALI_PHY_1065_DATA,
+ DENALI_PHY_1066_DATA,
+ DENALI_PHY_1067_DATA,
+ DENALI_PHY_1068_DATA,
+ DENALI_PHY_1069_DATA,
+ DENALI_PHY_1070_DATA,
+ DENALI_PHY_1071_DATA,
+ DENALI_PHY_1072_DATA,
+ DENALI_PHY_1073_DATA,
+ DENALI_PHY_1074_DATA,
+ DENALI_PHY_1075_DATA,
+ DENALI_PHY_1076_DATA,
+ DENALI_PHY_1077_DATA,
+ DENALI_PHY_1078_DATA,
+ DENALI_PHY_1079_DATA,
+ DENALI_PHY_1080_DATA,
+ DENALI_PHY_1081_DATA,
+ DENALI_PHY_1082_DATA,
+ DENALI_PHY_1083_DATA,
+ DENALI_PHY_1084_DATA,
+ DENALI_PHY_1085_DATA,
+ DENALI_PHY_1086_DATA,
+ DENALI_PHY_1087_DATA,
+ DENALI_PHY_1088_DATA,
+ DENALI_PHY_1089_DATA,
+ DENALI_PHY_1090_DATA,
+ DENALI_PHY_1091_DATA,
+ DENALI_PHY_1092_DATA,
+ DENALI_PHY_1093_DATA,
+ DENALI_PHY_1094_DATA,
+ DENALI_PHY_1095_DATA,
+ DENALI_PHY_1096_DATA,
+ DENALI_PHY_1097_DATA,
+ DENALI_PHY_1098_DATA,
+ DENALI_PHY_1099_DATA,
+ DENALI_PHY_1100_DATA,
+ DENALI_PHY_1101_DATA,
+ DENALI_PHY_1102_DATA,
+ DENALI_PHY_1103_DATA,
+ DENALI_PHY_1104_DATA,
+ DENALI_PHY_1105_DATA,
+ DENALI_PHY_1106_DATA,
+ DENALI_PHY_1107_DATA,
+ DENALI_PHY_1108_DATA,
+ DENALI_PHY_1109_DATA,
+ DENALI_PHY_1110_DATA,
+ DENALI_PHY_1111_DATA,
+ DENALI_PHY_1112_DATA,
+ DENALI_PHY_1113_DATA,
+ DENALI_PHY_1114_DATA,
+ DENALI_PHY_1115_DATA,
+ DENALI_PHY_1116_DATA,
+ DENALI_PHY_1117_DATA,
+ DENALI_PHY_1118_DATA,
+ DENALI_PHY_1119_DATA,
+ DENALI_PHY_1120_DATA,
+ DENALI_PHY_1121_DATA,
+ DENALI_PHY_1122_DATA,
+ DENALI_PHY_1123_DATA,
+ DENALI_PHY_1124_DATA,
+ DENALI_PHY_1125_DATA,
+ DENALI_PHY_1126_DATA,
+ DENALI_PHY_1127_DATA,
+ DENALI_PHY_1128_DATA,
+ DENALI_PHY_1129_DATA,
+ DENALI_PHY_1130_DATA,
+ DENALI_PHY_1131_DATA,
+ DENALI_PHY_1132_DATA,
+ DENALI_PHY_1133_DATA,
+ DENALI_PHY_1134_DATA,
+ DENALI_PHY_1135_DATA,
+ DENALI_PHY_1136_DATA,
+ DENALI_PHY_1137_DATA,
+ DENALI_PHY_1138_DATA,
+ DENALI_PHY_1139_DATA,
+ DENALI_PHY_1140_DATA,
+ DENALI_PHY_1141_DATA,
+ DENALI_PHY_1142_DATA,
+ DENALI_PHY_1143_DATA,
+ DENALI_PHY_1144_DATA,
+ DENALI_PHY_1145_DATA,
+ DENALI_PHY_1146_DATA,
+ DENALI_PHY_1147_DATA,
+ DENALI_PHY_1148_DATA,
+ DENALI_PHY_1149_DATA,
+ DENALI_PHY_1150_DATA,
+ DENALI_PHY_1151_DATA,
+ DENALI_PHY_1152_DATA,
+ DENALI_PHY_1153_DATA,
+ DENALI_PHY_1154_DATA,
+ DENALI_PHY_1155_DATA,
+ DENALI_PHY_1156_DATA,
+ DENALI_PHY_1157_DATA,
+ DENALI_PHY_1158_DATA,
+ DENALI_PHY_1159_DATA,
+ DENALI_PHY_1160_DATA,
+ DENALI_PHY_1161_DATA,
+ DENALI_PHY_1162_DATA,
+ DENALI_PHY_1163_DATA,
+ DENALI_PHY_1164_DATA,
+ DENALI_PHY_1165_DATA,
+ DENALI_PHY_1166_DATA,
+ DENALI_PHY_1167_DATA,
+ DENALI_PHY_1168_DATA,
+ DENALI_PHY_1169_DATA,
+ DENALI_PHY_1170_DATA,
+ DENALI_PHY_1171_DATA,
+ DENALI_PHY_1172_DATA,
+ DENALI_PHY_1173_DATA,
+ DENALI_PHY_1174_DATA,
+ DENALI_PHY_1175_DATA,
+ DENALI_PHY_1176_DATA,
+ DENALI_PHY_1177_DATA,
+ DENALI_PHY_1178_DATA,
+ DENALI_PHY_1179_DATA,
+ DENALI_PHY_1180_DATA,
+ DENALI_PHY_1181_DATA,
+ DENALI_PHY_1182_DATA,
+ DENALI_PHY_1183_DATA,
+ DENALI_PHY_1184_DATA,
+ DENALI_PHY_1185_DATA,
+ DENALI_PHY_1186_DATA,
+ DENALI_PHY_1187_DATA,
+ DENALI_PHY_1188_DATA,
+ DENALI_PHY_1189_DATA,
+ DENALI_PHY_1190_DATA,
+ DENALI_PHY_1191_DATA,
+ DENALI_PHY_1192_DATA,
+ DENALI_PHY_1193_DATA,
+ DENALI_PHY_1194_DATA,
+ DENALI_PHY_1195_DATA,
+ DENALI_PHY_1196_DATA,
+ DENALI_PHY_1197_DATA,
+ DENALI_PHY_1198_DATA,
+ DENALI_PHY_1199_DATA,
+ DENALI_PHY_1200_DATA,
+ DENALI_PHY_1201_DATA,
+ DENALI_PHY_1202_DATA,
+ DENALI_PHY_1203_DATA,
+ DENALI_PHY_1204_DATA,
+ DENALI_PHY_1205_DATA,
+ DENALI_PHY_1206_DATA,
+ DENALI_PHY_1207_DATA,
+ DENALI_PHY_1208_DATA,
+ DENALI_PHY_1209_DATA,
+ DENALI_PHY_1210_DATA,
+ DENALI_PHY_1211_DATA,
+ DENALI_PHY_1212_DATA,
+ DENALI_PHY_1213_DATA,
+ DENALI_PHY_1214_DATA,
+};
+const uint32_t denali_ddr_ctl_data[265] = {
+ DENALI_CTL_00_DATA,
+ DENALI_CTL_01_DATA,
+ DENALI_CTL_02_DATA,
+ DENALI_CTL_03_DATA,
+ DENALI_CTL_04_DATA,
+ DENALI_CTL_05_DATA,
+ DENALI_CTL_06_DATA,
+ DENALI_CTL_07_DATA,
+ DENALI_CTL_08_DATA,
+ DENALI_CTL_09_DATA,
+ DENALI_CTL_10_DATA,
+ DENALI_CTL_11_DATA,
+ DENALI_CTL_12_DATA,
+ DENALI_CTL_13_DATA,
+ DENALI_CTL_14_DATA,
+ DENALI_CTL_15_DATA,
+ DENALI_CTL_16_DATA,
+ DENALI_CTL_17_DATA,
+ DENALI_CTL_18_DATA,
+ DENALI_CTL_19_DATA,
+ DENALI_CTL_20_DATA,
+ DENALI_CTL_21_DATA,
+ DENALI_CTL_22_DATA,
+ DENALI_CTL_23_DATA,
+ DENALI_CTL_24_DATA,
+ DENALI_CTL_25_DATA,
+ DENALI_CTL_26_DATA,
+ DENALI_CTL_27_DATA,
+ DENALI_CTL_28_DATA,
+ DENALI_CTL_29_DATA,
+ DENALI_CTL_30_DATA,
+ DENALI_CTL_31_DATA,
+ DENALI_CTL_32_DATA,
+ DENALI_CTL_33_DATA,
+ DENALI_CTL_34_DATA,
+ DENALI_CTL_35_DATA,
+ DENALI_CTL_36_DATA,
+ DENALI_CTL_37_DATA,
+ DENALI_CTL_38_DATA,
+ DENALI_CTL_39_DATA,
+ DENALI_CTL_40_DATA,
+ DENALI_CTL_41_DATA,
+ DENALI_CTL_42_DATA,
+ DENALI_CTL_43_DATA,
+ DENALI_CTL_44_DATA,
+ DENALI_CTL_45_DATA,
+ DENALI_CTL_46_DATA,
+ DENALI_CTL_47_DATA,
+ DENALI_CTL_48_DATA,
+ DENALI_CTL_49_DATA,
+ DENALI_CTL_50_DATA,
+ DENALI_CTL_51_DATA,
+ DENALI_CTL_52_DATA,
+ DENALI_CTL_53_DATA,
+ DENALI_CTL_54_DATA,
+ DENALI_CTL_55_DATA,
+ DENALI_CTL_56_DATA,
+ DENALI_CTL_57_DATA,
+ DENALI_CTL_58_DATA,
+ DENALI_CTL_59_DATA,
+ DENALI_CTL_60_DATA,
+ DENALI_CTL_61_DATA,
+ DENALI_CTL_62_DATA,
+ DENALI_CTL_63_DATA,
+ DENALI_CTL_64_DATA,
+ DENALI_CTL_65_DATA,
+ DENALI_CTL_66_DATA,
+ DENALI_CTL_67_DATA,
+ DENALI_CTL_68_DATA,
+ DENALI_CTL_69_DATA,
+ DENALI_CTL_70_DATA,
+ DENALI_CTL_71_DATA,
+ DENALI_CTL_72_DATA,
+ DENALI_CTL_73_DATA,
+ DENALI_CTL_74_DATA,
+ DENALI_CTL_75_DATA,
+ DENALI_CTL_76_DATA,
+ DENALI_CTL_77_DATA,
+ DENALI_CTL_78_DATA,
+ DENALI_CTL_79_DATA,
+ DENALI_CTL_80_DATA,
+ DENALI_CTL_81_DATA,
+ DENALI_CTL_82_DATA,
+ DENALI_CTL_83_DATA,
+ DENALI_CTL_84_DATA,
+ DENALI_CTL_85_DATA,
+ DENALI_CTL_86_DATA,
+ DENALI_CTL_87_DATA,
+ DENALI_CTL_88_DATA,
+ DENALI_CTL_89_DATA,
+ DENALI_CTL_90_DATA,
+ DENALI_CTL_91_DATA,
+ DENALI_CTL_92_DATA,
+ DENALI_CTL_93_DATA,
+ DENALI_CTL_94_DATA,
+ DENALI_CTL_95_DATA,
+ DENALI_CTL_96_DATA,
+ DENALI_CTL_97_DATA,
+ DENALI_CTL_98_DATA,
+ DENALI_CTL_99_DATA,
+ DENALI_CTL_100_DATA,
+ DENALI_CTL_101_DATA,
+ DENALI_CTL_102_DATA,
+ DENALI_CTL_103_DATA,
+ DENALI_CTL_104_DATA,
+ DENALI_CTL_105_DATA,
+ DENALI_CTL_106_DATA,
+ DENALI_CTL_107_DATA,
+ DENALI_CTL_108_DATA,
+ DENALI_CTL_109_DATA,
+ DENALI_CTL_110_DATA,
+ DENALI_CTL_111_DATA,
+ DENALI_CTL_112_DATA,
+ DENALI_CTL_113_DATA,
+ DENALI_CTL_114_DATA,
+ DENALI_CTL_115_DATA,
+ DENALI_CTL_116_DATA,
+ DENALI_CTL_117_DATA,
+ DENALI_CTL_118_DATA,
+ DENALI_CTL_119_DATA,
+ DENALI_CTL_120_DATA,
+ DENALI_CTL_121_DATA,
+ DENALI_CTL_122_DATA,
+ DENALI_CTL_123_DATA,
+ DENALI_CTL_124_DATA,
+ DENALI_CTL_125_DATA,
+ DENALI_CTL_126_DATA,
+ DENALI_CTL_127_DATA,
+ DENALI_CTL_128_DATA,
+ DENALI_CTL_129_DATA,
+ DENALI_CTL_130_DATA,
+ DENALI_CTL_131_DATA,
+ DENALI_CTL_132_DATA,
+ DENALI_CTL_133_DATA,
+ DENALI_CTL_134_DATA,
+ DENALI_CTL_135_DATA,
+ DENALI_CTL_136_DATA,
+ DENALI_CTL_137_DATA,
+ DENALI_CTL_138_DATA,
+ DENALI_CTL_139_DATA,
+ DENALI_CTL_140_DATA,
+ DENALI_CTL_141_DATA,
+ DENALI_CTL_142_DATA,
+ DENALI_CTL_143_DATA,
+ DENALI_CTL_144_DATA,
+ DENALI_CTL_145_DATA,
+ DENALI_CTL_146_DATA,
+ DENALI_CTL_147_DATA,
+ DENALI_CTL_148_DATA,
+ DENALI_CTL_149_DATA,
+ DENALI_CTL_150_DATA,
+ DENALI_CTL_151_DATA,
+ DENALI_CTL_152_DATA,
+ DENALI_CTL_153_DATA,
+ DENALI_CTL_154_DATA,
+ DENALI_CTL_155_DATA,
+ DENALI_CTL_156_DATA,
+ DENALI_CTL_157_DATA,
+ DENALI_CTL_158_DATA,
+ DENALI_CTL_159_DATA,
+ DENALI_CTL_160_DATA,
+ DENALI_CTL_161_DATA,
+ DENALI_CTL_162_DATA,
+ DENALI_CTL_163_DATA,
+ DENALI_CTL_164_DATA,
+ DENALI_CTL_165_DATA,
+ DENALI_CTL_166_DATA,
+ DENALI_CTL_167_DATA,
+ DENALI_CTL_168_DATA,
+ DENALI_CTL_169_DATA,
+ DENALI_CTL_170_DATA,
+ DENALI_CTL_171_DATA,
+ DENALI_CTL_172_DATA,
+ DENALI_CTL_173_DATA,
+ DENALI_CTL_174_DATA,
+ DENALI_CTL_175_DATA,
+ DENALI_CTL_176_DATA,
+ DENALI_CTL_177_DATA,
+ DENALI_CTL_178_DATA,
+ DENALI_CTL_179_DATA,
+ DENALI_CTL_180_DATA,
+ DENALI_CTL_181_DATA,
+ DENALI_CTL_182_DATA,
+ DENALI_CTL_183_DATA,
+ DENALI_CTL_184_DATA,
+ DENALI_CTL_185_DATA,
+ DENALI_CTL_186_DATA,
+ DENALI_CTL_187_DATA,
+ DENALI_CTL_188_DATA,
+ DENALI_CTL_189_DATA,
+ DENALI_CTL_190_DATA,
+ DENALI_CTL_191_DATA,
+ DENALI_CTL_192_DATA,
+ DENALI_CTL_193_DATA,
+ DENALI_CTL_194_DATA,
+ DENALI_CTL_195_DATA,
+ DENALI_CTL_196_DATA,
+ DENALI_CTL_197_DATA,
+ DENALI_CTL_198_DATA,
+ DENALI_CTL_199_DATA,
+ DENALI_CTL_200_DATA,
+ DENALI_CTL_201_DATA,
+ DENALI_CTL_202_DATA,
+ DENALI_CTL_203_DATA,
+ DENALI_CTL_204_DATA,
+ DENALI_CTL_205_DATA,
+ DENALI_CTL_206_DATA,
+ DENALI_CTL_207_DATA,
+ DENALI_CTL_208_DATA,
+ DENALI_CTL_209_DATA,
+ DENALI_CTL_210_DATA,
+ DENALI_CTL_211_DATA,
+ DENALI_CTL_212_DATA,
+ DENALI_CTL_213_DATA,
+ DENALI_CTL_214_DATA,
+ DENALI_CTL_215_DATA,
+ DENALI_CTL_216_DATA,
+ DENALI_CTL_217_DATA,
+ DENALI_CTL_218_DATA,
+ DENALI_CTL_219_DATA,
+ DENALI_CTL_220_DATA,
+ DENALI_CTL_221_DATA,
+ DENALI_CTL_222_DATA,
+ DENALI_CTL_223_DATA,
+ DENALI_CTL_224_DATA,
+ DENALI_CTL_225_DATA,
+ DENALI_CTL_226_DATA,
+ DENALI_CTL_227_DATA,
+ DENALI_CTL_228_DATA,
+ DENALI_CTL_229_DATA,
+ DENALI_CTL_230_DATA,
+ DENALI_CTL_231_DATA,
+ DENALI_CTL_232_DATA,
+ DENALI_CTL_233_DATA,
+ DENALI_CTL_234_DATA,
+ DENALI_CTL_235_DATA,
+ DENALI_CTL_236_DATA,
+ DENALI_CTL_237_DATA,
+ DENALI_CTL_238_DATA,
+ DENALI_CTL_239_DATA,
+ DENALI_CTL_240_DATA,
+ DENALI_CTL_241_DATA,
+ DENALI_CTL_242_DATA,
+ DENALI_CTL_243_DATA,
+ DENALI_CTL_244_DATA,
+ DENALI_CTL_245_DATA,
+ DENALI_CTL_246_DATA,
+ DENALI_CTL_247_DATA,
+ DENALI_CTL_248_DATA,
+ DENALI_CTL_249_DATA,
+ DENALI_CTL_250_DATA,
+ DENALI_CTL_251_DATA,
+ DENALI_CTL_252_DATA,
+ DENALI_CTL_253_DATA,
+ DENALI_CTL_254_DATA,
+ DENALI_CTL_255_DATA,
+ DENALI_CTL_256_DATA,
+ DENALI_CTL_257_DATA,
+ DENALI_CTL_258_DATA,
+ DENALI_CTL_259_DATA,
+ DENALI_CTL_260_DATA,
+ DENALI_CTL_261_DATA,
+ DENALI_CTL_262_DATA,
+ DENALI_CTL_263_DATA,
+ DENALI_CTL_264_DATA,
+};
diff --git a/src/soc/sifive/fu740/gpio.c b/src/soc/sifive/fu740/gpio.c
new file mode 100644
index 0000000..167844d
--- /dev/null
+++ b/src/soc/sifive/fu740/gpio.c
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <soc/addressmap.h>
+#include <soc/gpio.h>
+#include <stdint.h>
+#include <arch/mmio.h>
+#include <delay.h>
+#include <assert.h>
+#include <device/mmio.h>
+#include <gpio.h>
+
+#define SIFIVE_GPIO_INPUT_VAL (FU740_GPIO + 0x00)
+#define SIFIVE_GPIO_INPUT_EN (FU740_GPIO + 0x04)
+#define SIFIVE_GPIO_OUTPUT_EN (FU740_GPIO + 0x08)
+#define SIFIVE_GPIO_OUTPUT_VAL (FU740_GPIO + 0x0C)
+#define SIFIVE_GPIO_PUE (FU740_GPIO + 0x10)
+#define SIFIVE_GPIO_DS (FU740_GPIO + 0x14)
+#define SIFIVE_GPIO_RISE_IE (FU740_GPIO + 0x18)
+#define SIFIVE_GPIO_RISE_IP (FU740_GPIO + 0x1C)
+#define SIFIVE_GPIO_FALL_IE (FU740_GPIO + 0x20)
+#define SIFIVE_GPIO_FALL_IP (FU740_GPIO + 0x24)
+#define SIFIVE_GPIO_HIGH_IE (FU740_GPIO + 0x28)
+#define SIFIVE_GPIO_HIGH_IP (FU740_GPIO + 0x2C)
+#define SIFIVE_GPIO_LOW_IE (FU740_GPIO + 0x30)
+#define SIFIVE_GPIO_LOW_IP (FU740_GPIO + 0x34)
+#define SIFIVE_GPIO_IOF_EN (FU740_GPIO + 0x38)
+#define SIFIVE_GPIO_IOF_SEL (FU740_GPIO + 0x3C)
+#define SIFIVE_GPIO_OUT_XOR (FU740_GPIO + 0x40)
+
+void gpio_set(gpio_t gpio, int value)
+{
+ uint32_t output_val = read32((void *)SIFIVE_GPIO_OUTPUT_VAL);
+
+ if (value)
+ output_val |= (1 << gpio);
+ else
+ output_val &= ~(1 << gpio);
+
+ write32((void *)SIFIVE_GPIO_OUTPUT_VAL, output_val);
+}
+
+int gpio_get(gpio_t gpio)
+{
+ uint32_t input_val = read32((void *)SIFIVE_GPIO_INPUT_VAL);
+ return !!(input_val & (1 << gpio));
+}
+
+void gpio_set_direction(gpio_t gpio, enum gpio_direction gpio_dir)
+{
+ uint32_t input_en = read32((void *)SIFIVE_GPIO_INPUT_EN);
+ uint32_t output_en = read32((void *)SIFIVE_GPIO_OUTPUT_EN);
+
+ if (gpio_dir == GPIO_OUTPUT) {
+ input_en &= ~(1 << gpio);
+ output_en |= (1 << gpio);
+ } else if (gpio_dir == GPIO_INPUT) {
+ input_en |= (1 << gpio);
+ output_en &= ~(1 << gpio);
+ }
+
+ write32((void *)SIFIVE_GPIO_INPUT_EN, input_en);
+ write32((void *)SIFIVE_GPIO_OUTPUT_EN, output_en);
+}
diff --git a/src/soc/sifive/fu740/include/soc/addressmap.h b/src/soc/sifive/fu740/include/soc/addressmap.h
new file mode 100644
index 0000000..a4b0d54
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/addressmap.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+// reference: fu740-c000 manual chapter 5: Memory Map
+// Table 15: (TODO: subject for common code: none of these changed compared to fu540)
+#define FU740_ROM 0x00001000
+#define FU740_DTIM 0x01000000
+#define FU740_CLINT 0x02000000
+#define FU740_L2LIM 0x08000000
+#define FU740_PRCI 0x10000000
+#define FU740_UART0 0x10010000
+#define FU740_UART1 0x10011000
+#define FU740_QSPI0 0x10040000
+#define FU740_QSPI1 0x10041000
+#define FU740_QSPI2 0x10050000 // in unmatched board schematics it's called SPI0
+#define FU740_GPIO 0x10060000
+#define FU740_OTP 0x10070000
+#define FU740_PINCTRL 0x10080000
+#define FU740_DDRCTRL 0x100b0000
+#define FU740_DDRPHY 0x100b2000
+#define FU740_DDRMGMT 0x100c0000
+#define FU740_QSPI0FLASH 0x20000000
+#define FU740_QSPI1FLASH 0x30000000
+#define FU740_DRAM 0x80000000
+
+#define PCIE_MGMT 0x100D0000
+#define PCIE_CONFIG 0x000D_F000_0000
+#define PCIE_DBI 0x000E_0000_0000
+
+#define FU740_I2C_0 0x10030000
+#define FU740_I2C_1 0x10031000
+
+// Reset Vector - 4
+#define FU740_ROM1 0x00001000
+// After reset vector it will jump directly to this address if ZSBL is used (ZSBL code)
+#define FU740_ROM2 0x00010000
+#define FU740_MSEL FU740_ROM // mode select is always at start of ROM
+
+// naming changed a bit between FU540 and FU740 manuals
+// Ethernet MAC -> Ethernet
+// Ethernet Management -> GEMGXL MGMT
+#define SIFIVE_ETHERNET_MAC 0x10090000
+#define SIFIVE_ETHERNET_MGMT 0x100A0000
+
+#define FU740_UART(i) (FU740_UART0 + 0x1000 * i)
diff --git a/src/soc/sifive/fu740/include/soc/clock.h b/src/soc/sifive/fu740/include/soc/clock.h
new file mode 100644
index 0000000..01cb1b3
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/clock.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_SIFIVE_FU740_CLOCK_H__
+#define __SOC_SIFIVE_FU740_CLOCK_H__
+
+void clock_init(void);
+int clock_get_pclk(void);
+
+#endif /* __SOC_SIFIVE_FU740_CLOCK_H__ */
diff --git a/src/soc/sifive/fu740/include/soc/gpio.h b/src/soc/sifive/fu740/include/soc/gpio.h
new file mode 100644
index 0000000..b0466cc
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/gpio.h
@@ -0,0 +1,36 @@
+#ifndef _SOC_SIFIVE_FU740_GPIO_H_
+#define _SOC_SIFIVE_FU740_GPIO_H_
+
+#include <stdint.h>
+
+//TODO these are mainboard specific
+enum gpio {
+ J29_1,
+ PMICINTB,
+ PMICSHDN,
+ J8_1,
+ J8_3,
+ PCIE_PWREN, // connected to power rails of PCIe connectors
+ THERM,
+ UBRDG_RSTN,
+ PCIE_PERSTN, // connected to PERST pin of PCIe connectors
+ ULPI_RSTN,
+ J8_2,
+ UHUB_RSTN,
+ GEMGXL_RST,
+ J8_4,
+ EN_VDD_SD,
+ SD_CD,
+};
+
+// this is to satisfy src/include/gpio.h
+typedef enum gpio gpio_t;
+
+enum gpio_direction {
+ GPIO_INPUT,
+ GPIO_OUTPUT,
+};
+
+void gpio_set_direction(gpio_t gpio, enum gpio_direction gpio_dir);
+
+#endif // _SOC_SIFIVE_FU740_GPIO_H_
diff --git a/src/soc/sifive/fu740/include/soc/otp.h b/src/soc/sifive/fu740/include/soc/otp.h
new file mode 100644
index 0000000..0405fda
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/otp.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_SIFIVE_FU740_OTP_H__
+#define __SOC_SIFIVE_FU740_OTP_H__
+
+#include <stdint.h>
+
+u32 otp_read_word(u16 idx);
+u32 otp_read_serial(void);
+
+#endif /* __SOC_SIFIVE_FU740_OTP_H__ */
diff --git a/src/soc/sifive/fu740/include/soc/sdram.h b/src/soc/sifive/fu740/include/soc/sdram.h
new file mode 100644
index 0000000..50193b6
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/sdram.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_SIFIVE_FU740_SDRAM_H__
+#define __SOC_SIFIVE_FU740_SDRAM_H__
+
+#include <types.h>
+
+void sdram_init(void);
+size_t sdram_size(void);
+
+#endif
diff --git a/src/soc/sifive/fu740/include/soc/spi.h b/src/soc/sifive/fu740/include/soc/spi.h
new file mode 100644
index 0000000..80e52bb
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/spi.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SOC_SIFIVE_FU740_SPI_H__
+#define __SOC_SIFIVE_FU740_SPI_H__
+
+#include <spi-generic.h>
+
+// Frame Format Register Register (fmt)
+
+#define FU740_SPI_PROTO_S 0 // Data Pins: MOSI MISO
+#define FU740_SPI_PROTO_D 1 // Data Pins: DQ0 DQ1
+#define FU740_SPI_PROTO_Q 2 // Data Pins: DQ0 DQ1 DQ2 DQ3
+
+#define FU740_SPI_ENDIAN_BIG 0 // send MSB first
+#define FU740_SPI_ENDIAN_LITTLE 1 // send LSB first
+
+// Serial Clock Mode Register (sckmode)
+
+#define FU740_SPI_PHA_LOW 0 // inactive state of SCK is logical 0
+#define FU740_SPI_PHA_HIGH 1 // inactive state of SCK is logical 1
+
+#define FU740_SPI_POL_LEADING 0 // data is sampled on leading edge of sck
+#define FU740_SPI_POL_TRAILING 1 // data is sampled on trailing edge of sck
+
+// ffmt register (SPI Flash Instruction Format Register)
+struct fu740_spi_ffmt_config {
+ unsigned int cmd_en; // enable sending of command
+ unsigned int addr_len; // number of address bytes (0-4)
+ unsigned int pad_cnt; // number of dummy cycles
+ unsigned int cmd_proto; // protocol for transmitting command
+ unsigned int addr_proto; // protocol for transmitting address and padding
+ unsigned int data_proto; // protocol for receiving data bytes
+ unsigned int cmd_code; // value of command byte
+ unsigned int pad_code; // first 8 bits to transmit during dummy cycles
+};
+
+struct fu740_spi_fmt_config {
+ unsigned int protocol; // FU740_SPI_PROTO_S, FU740_SPI_PROTO_D, FU740_SPI_PROTO_Q
+ unsigned int endianness; // 0 = MSB, 1 = LSB
+ unsigned int io_dir; // Rx, Tx
+ unsigned int bits_per_frame; // up to 8bits
+};
+
+struct fu740_spi_config {
+ unsigned int freq; // speed of spi interface
+ unsigned int pha; // serial clock phase
+ unsigned int pol; // serial clock polarity
+ struct fu740_spi_fmt_config fmt_config; // frame format config
+ struct fu740_spi_ffmt_config ffmt_config; // flash instruction format
+};
+
+extern struct fu740_spi_config fu740_spi_configs[];
+
+int fu740_spi_setup(const struct spi_slave *slave);
+
+#endif /* __SOC_SIFIVE_FU740_SPI_H__ */
diff --git a/src/soc/sifive/fu740/include/soc/ux00ddr.h b/src/soc/sifive/fu740/include/soc/ux00ddr.h
new file mode 100644
index 0000000..4393469
--- /dev/null
+++ b/src/soc/sifive/fu740/include/soc/ux00ddr.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: Apache-2.0 */
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* See the file LICENSE for further information */
+#ifndef _SIFIVE_UX00DDR_H
+#define _SIFIVE_UX00DDR_H
+#ifndef __ASSEMBLER__
+
+//TODO refactor
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define DRAM_CLASS_OFFSET 8
+#define DRAM_CLASS_DDR4 0xA
+#define OPTIMAL_RMODW_EN_OFFSET 0
+#define DISABLE_RD_INTERLEAVE_OFFSET 16
+#define OUT_OF_RANGE_OFFSET 1
+#define MULTIPLE_OUT_OF_RANGE_OFFSET 2
+#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7
+#define MC_INIT_COMPLETE_OFFSET 8
+#define LEVELING_OPERATION_COMPLETED_OFFSET 22
+#define DFI_PHY_WRLELV_MODE_OFFSET 24
+#define DFI_PHY_RDLVL_MODE_OFFSET 24
+#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0
+#define VREF_EN_OFFSET 24
+#define PORT_ADDR_PROTECTION_EN_OFFSET 0
+#define AXI0_ADDRESS_RANGE_ENABLE 8
+#define AXI0_RANGE_PROT_BITS_0_OFFSET 24
+#define RDLVL_EN_OFFSET 16
+#define RDLVL_GATE_EN_OFFSET 24
+#define WRLVL_EN_OFFSET 0
+#define PHY_RX_CAL_DQ0_0_OFFSET 0
+#define PHY_RX_CAL_DQ1_0_OFFSET 16
+
+static inline void phy_reset(volatile uint32_t *ddrphyreg, const uint32_t *physettings)
+{
+ unsigned int i;
+ for (i=1152;i<=1214;i++) {
+ uint32_t physet = physettings[i];
+ /*if (physet!=0)*/ ddrphyreg[i] = physet;
+ }
+ for (i=0;i<=1151;i++) {
+ uint32_t physet = physettings[i];
+ /*if (physet!=0)*/ ddrphyreg[i] = physet;
+ }
+}
+static inline void ux00ddr_writeregmap(size_t ahbregaddr, const uint32_t *ctlsettings, const uint32_t *physettings) {
+ volatile uint32_t *ddrctlreg = (volatile uint32_t *) ahbregaddr;
+ volatile uint32_t *ddrphyreg = ((volatile uint32_t *) ahbregaddr) + (0x2000 / sizeof(uint32_t));
+ unsigned int i;
+ for (i=0;i<=264;i++) {
+ uint32_t ctlset = ctlsettings[i];
+ /*if (ctlset!=0)*/ ddrctlreg[i] = ctlset;
+ }
+ phy_reset(ddrphyreg, physettings);
+}
+static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, size_t ddrend) {
+ // START register at ddrctl register base offset 0
+ uint32_t regdata = _REG32(0<<2, ahbregaddr);
+ regdata |= 0x1;
+ _REG32(0<<2, ahbregaddr) = regdata;
+ // WAIT for initialization complete : bit 8 of INT_STATUS (DENALI_CTL_132) 0x210
+ while ((_REG32(132<<2, ahbregaddr) & (1<<MC_INIT_COMPLETE_OFFSET)) == 0) {}
+ // Disable the BusBlocker in front of the controller AXI slave ports
+ volatile uint64_t *filterreg = (volatile uint64_t *)filteraddr;
+ filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2);
+ // ^^ RWX + TOR
+}
+static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t ahbregaddr) {
+ // Mask off Bit 8 of Interrupt Status
+ // Bit [8] The MC initialization has been completed
+ _REG32(136<<2, ahbregaddr) |= (1<<MC_INIT_COMPLETE_OFFSET);
+}
+static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) {
+ // Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status
+ // Bit [2] Multiple accesses outside the defined PHYSICAL memory space have occurred
+ // Bit [1] A memory access outside the defined PHYSICAL memory space has occurred
+ _REG32(136<<2, ahbregaddr) |= ((1<<OUT_OF_RANGE_OFFSET) | (1<<MULTIPLE_OUT_OF_RANGE_OFFSET));
+}
+static inline void ux00ddr_mask_port_command_error_interrupt(size_t ahbregaddr) {
+ // Mask off Bit 7 of Interrupt Status
+ // Bit [7] An error occurred on the port command channel
+ _REG32(136<<2, ahbregaddr) |= (1<<PORT_COMMAND_CHANNEL_ERROR_OFFSET);
+}
+static inline void ux00ddr_mask_leveling_completed_interrupt(size_t ahbregaddr) {
+ // Mask off Bit 22 of Interrupt Status
+ // Bit [22] The leveling operation has completed
+ _REG32(136<<2, ahbregaddr) |= (1<<LEVELING_OPERATION_COMPLETED_OFFSET);
+}
+static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t end_addr) {
+ _REG32(209<<2, ahbregaddr) = 0x0;
+ size_t end_addr_16Kblocks = ((end_addr >> 14) & 0x7FFFFF)-1;
+ _REG32(210<<2, ahbregaddr) = ((uint32_t) end_addr_16Kblocks);
+ _REG32(212<<2, ahbregaddr) = 0x0;
+ _REG32(214<<2, ahbregaddr) = 0x0;
+ _REG32(216<<2, ahbregaddr) = 0x0;
+ _REG32(224<<2, ahbregaddr) |= (0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET);
+ _REG32(225<<2, ahbregaddr) = 0xFFFFFFFF;
+ _REG32(208<<2, ahbregaddr) |= (1 << AXI0_ADDRESS_RANGE_ENABLE);
+ _REG32(208<<2, ahbregaddr) |= (1 << PORT_ADDR_PROTECTION_EN_OFFSET);
+}
+static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr)
+{
+ _REG32(120<<2, ahbregaddr) |= (1<<DISABLE_RD_INTERLEAVE_OFFSET);
+}
+static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr)
+{
+ _REG32(21<<2, ahbregaddr) &= (~(1<<OPTIMAL_RMODW_EN_OFFSET));
+}
+static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr)
+{
+ _REG32(170<<2, ahbregaddr) |= ((1<<WRLVL_EN_OFFSET) | (1<<DFI_PHY_WRLELV_MODE_OFFSET));
+}
+static inline void ux00ddr_enablereadleveling(size_t ahbregaddr)
+{
+ _REG32(181<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_MODE_OFFSET);
+ _REG32(260<<2, ahbregaddr) |= (1<<RDLVL_EN_OFFSET);
+}
+static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr)
+{
+ _REG32(260<<2, ahbregaddr) |= (1<<RDLVL_GATE_EN_OFFSET);
+ _REG32(182<<2, ahbregaddr) |= (1<<DFI_PHY_RDLVL_GATE_MODE_OFFSET);
+}
+static inline void ux00ddr_enablevreftraining(size_t ahbregaddr)
+{
+ _REG32(184<<2, ahbregaddr) |= (1<<VREF_EN_OFFSET);
+}
+static inline uint32_t ux00ddr_getdramclass(size_t ahbregaddr)
+{
+ return ((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF);
+}
+static inline uint64_t ux00ddr_phy_fixup(size_t ahbregaddr)
+{
+ // return bitmask of failed lanes
+ size_t ddrphyreg = ahbregaddr + 0x2000;
+ uint64_t fails=0;
+ uint32_t slicebase = 0;
+ uint32_t dq = 0;
+ // check errata condition
+ for (uint32_t slice = 0; slice < 8; slice++) {
+ uint32_t regbase = slicebase + 34;
+ for (uint32_t reg = 0 ; reg < 4; reg++) {
+ uint32_t updownreg = _REG32((regbase+reg)<<2, ddrphyreg);
+ for (uint32_t bit = 0; bit < 2; bit++) {
+ uint32_t phy_rx_cal_dqn_0_offset;
+ if (bit==0) {
+ phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ0_0_OFFSET;
+ } else {
+ phy_rx_cal_dqn_0_offset = PHY_RX_CAL_DQ1_0_OFFSET;
+ }
+ uint32_t down = (updownreg >> phy_rx_cal_dqn_0_offset) & 0x3F;
+ uint32_t up = (updownreg >> (phy_rx_cal_dqn_0_offset+6)) & 0x3F;
+ uint8_t failc0 = ((down == 0) && (up == 0x3F));
+ uint8_t failc1 = ((up == 0) && (down == 0x3F));
+ // print error message on failure
+ if (failc0 || failc1) {
+ //if (fails==0) uart_puts((void*) UART0_CTRL_ADDR, "DDR error in fixing up \n");
+ fails |= (1<<dq);
+ /* char slicelsc = '0'; */
+ /* char slicemsc = '0'; */
+ /* slicelsc += (dq % 10); */
+ /* slicemsc += (dq / 10); */
+ //uart_puts((void*) UART0_CTRL_ADDR, "S ");
+ //uart_puts((void*) UART0_CTRL_ADDR, &slicemsc);
+ //uart_puts((void*) UART0_CTRL_ADDR, &slicelsc);
+ //if (failc0) uart_puts((void*) UART0_CTRL_ADDR, "U");
+ //else uart_puts((void*) UART0_CTRL_ADDR, "D");
+ //uart_puts((void*) UART0_CTRL_ADDR, "\n");
+ }
+ dq++;
+ }
+ }
+ slicebase+=128;
+ }
+ return (0);
+}
+#endif
+#endif
diff --git a/src/soc/sifive/fu740/memlayout.ld b/src/soc/sifive/fu740/memlayout.ld
new file mode 100644
index 0000000..5f9394b
--- /dev/null
+++ b/src/soc/sifive/fu740/memlayout.ld
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <memlayout.h>
+#include <soc/addressmap.h>
+
+#include <arch/header.ld>
+
+#define L2LIM_START(addr) REGION_START(l2lim, addr)
+#define L2LIM_END(addr) REGION_END(l2lim, addr)
+
+SECTIONS
+{
+#if CONFIG(SEPARATE_ROMSTAGE)
+ //TODO add code to replace closed source ZSBL
+ #error "separate romstage is not supported"
+#else
+ L2LIM_START(FU740_L2LIM)
+ /* The 64K size is not allocated. It's just for basic size checking. */
+ BOOTBLOCK(FU740_L2LIM, 64K)
+#endif
+ . = ALIGN(4K);
+ CAR_STACK(., 12K) // considering each harts stack is a pagesize (4K), we can potentially have up to 16 harts regarding stack space //TODO reduce it, since fu740 doesn't even have/support 16 harts
+ PRERAM_CBMEM_CONSOLE(., 8K)
+ CBFS_MCACHE(., 8K)
+ FMAP_CACHE(., 2K)
+ PRERAM_CBFS_CACHE(., 128K)
+ L2LIM_END(FU740_L2LIM + 2M)
+
+ DRAM_START(FU740_DRAM)
+ OPENSBI(., 256K)
+ //REGION(opensbi, FU740_DRAM, 256K, 4K)
+ /* The 256K size is not allocated. It's just for basic size checking. */
+ RAMSTAGE(., 256K)
+ . = ALIGN(4K);
+ MEM_STACK(., 20K)
+ POSTRAM_CBFS_CACHE(., 32M - 256K - 256K - 20K)
+}
diff --git a/src/soc/sifive/fu740/otp.c b/src/soc/sifive/fu740/otp.c
new file mode 100644
index 0000000..e00086a
--- /dev/null
+++ b/src/soc/sifive/fu740/otp.c
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <delay.h>
+#include <device/mmio.h>
+#include <console/console.h>
+#include <console/uart.h>
+#include <soc/addressmap.h>
+#include <soc/otp.h>
+
+/*
+ * This is a driver for the eMemory EG004K32TQ028XW01 NeoFuse
+ * One-Time-Programmable (OTP) memory used within the SiFive FU740.
+ * It is documented in the FU740 manual here:
+ * https://www.sifive.com/documentation/chips/freedom-u740-c000-manual/
+ */
+
+struct sifive_otp_registers {
+ u32 pa; /* Address input */
+ u32 paio; /* Program address input */
+ u32 pas; /* Program redundancy cell selection input */
+ u32 pce; /* OTP Macro enable input */
+ u32 pclk; /* Clock input */
+ u32 pdin; /* Write data input */
+ u32 pdout; /* Read data output */
+ u32 pdstb; /* Deep standby mode enable input (active low) */
+ u32 pprog; /* Program mode enable input */
+ u32 ptc; /* Test column enable input */
+ u32 ptm; /* Test mode enable input */
+ u32 ptm_rep;/* Repair function test mode enable input */
+ u32 ptr; /* Test row enable input */
+ u32 ptrim; /* Repair function enable input */
+ u32 pwe; /* Write enable input (defines program cycle) */
+} __packed;
+
+/*
+ * Read a 32 bit value addressed by its index from the OTP.
+ * The FU740 stores 4096x32 bit (16KiB) values.
+ * Index 0x00-0xff are reserved for SiFive internal use. (first 1KiB)
+ */
+
+u32 otp_read_word(u16 idx)
+{
+ u32 w;
+
+ if (idx >= 0x1000)
+ die("otp: idx out of bounds");
+
+ struct sifive_otp_registers *regs = (void *)(FU740_OTP);
+
+ // wake up from stand-by
+ write32(®s->pdstb, 0x01);
+
+ // enable repair function
+ write32(®s->ptrim, 0x01);
+
+ // enable input
+ write32(®s->pce, 0x01);
+
+ // address to read
+ write32(®s->pa, idx);
+
+ // cycle clock to read
+ write32(®s->pclk, 0x01);
+ mdelay(1);
+
+ write32(®s->pclk, 0x00);
+ mdelay(1);
+
+ w = read32(®s->pdout);
+
+ // shut down
+ write32(®s->pce, 0x00);
+ write32(®s->ptrim, 0x00);
+ write32(®s->pdstb, 0x00);
+
+ return w;
+}
+
+u32 otp_read_serial(void)
+{
+ u32 serial = 0;
+ u32 serial_n = 0;
+ for (int i = 0xfe; i > 0; i -= 2) {
+ serial = otp_read_word(i);
+ serial_n = otp_read_word(i+1);
+ if (serial == ~serial_n)
+ break;
+ }
+ return serial;
+}
diff --git a/src/soc/sifive/fu740/regconfig-ctl.h b/src/soc/sifive/fu740/regconfig-ctl.h
new file mode 100644
index 0000000..6e398a5
--- /dev/null
+++ b/src/soc/sifive/fu740/regconfig-ctl.h
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * Only a very small amount of registers is documented inside the FU740-C000 Manual and the
+ * rest are basically magic values
+ * source: u-boot
+ * (C) Copyright 2020 SiFive, Inc
+ */
+
+#define DENALI_CTL_00_DATA 0x00000a00
+#define DENALI_CTL_01_DATA 0x00000000
+#define DENALI_CTL_02_DATA 0x00000000
+#define DENALI_CTL_03_DATA 0x00000000
+#define DENALI_CTL_04_DATA 0x00000000
+#define DENALI_CTL_05_DATA 0x00000000
+#define DENALI_CTL_06_DATA 0x0000000a
+#define DENALI_CTL_07_DATA 0x0002d362
+#define DENALI_CTL_08_DATA 0x00071073
+#define DENALI_CTL_09_DATA 0x0a1c0255
+#define DENALI_CTL_10_DATA 0x1c1c0400
+#define DENALI_CTL_11_DATA 0x0404c90b
+#define DENALI_CTL_12_DATA 0x2b050405
+#define DENALI_CTL_13_DATA 0x0d0c081e
+#define DENALI_CTL_14_DATA 0x08090914
+#define DENALI_CTL_15_DATA 0x00fde718
+#define DENALI_CTL_16_DATA 0x00180a05
+#define DENALI_CTL_17_DATA 0x008b130d
+#define DENALI_CTL_18_DATA 0x01000118
+#define DENALI_CTL_19_DATA 0x0d032001
+#define DENALI_CTL_20_DATA 0x00000000
+#define DENALI_CTL_21_DATA 0x00000101
+#define DENALI_CTL_22_DATA 0x00000000
+#define DENALI_CTL_23_DATA 0x0a000000
+#define DENALI_CTL_24_DATA 0x00000000
+#define DENALI_CTL_25_DATA 0x01450100
+#define DENALI_CTL_26_DATA 0x00001c36
+#define DENALI_CTL_27_DATA 0x00000005
+#define DENALI_CTL_28_DATA 0x00170006
+#define DENALI_CTL_29_DATA 0x014e0400
+#define DENALI_CTL_30_DATA 0x03010000
+#define DENALI_CTL_31_DATA 0x000a0e00
+#define DENALI_CTL_32_DATA 0x04030200
+#define DENALI_CTL_33_DATA 0x0000031f
+#define DENALI_CTL_34_DATA 0x00070004
+#define DENALI_CTL_35_DATA 0x00000000
+#define DENALI_CTL_36_DATA 0x00000000
+#define DENALI_CTL_37_DATA 0x00000000
+#define DENALI_CTL_38_DATA 0x00000000
+#define DENALI_CTL_39_DATA 0x00000000
+#define DENALI_CTL_40_DATA 0x00000000
+#define DENALI_CTL_41_DATA 0x00000000
+#define DENALI_CTL_42_DATA 0x00000000
+#define DENALI_CTL_43_DATA 0x00000000
+#define DENALI_CTL_44_DATA 0x00000000
+#define DENALI_CTL_45_DATA 0x00000000
+#define DENALI_CTL_46_DATA 0x00000000
+#define DENALI_CTL_47_DATA 0x00000000
+#define DENALI_CTL_48_DATA 0x00000000
+#define DENALI_CTL_49_DATA 0x00000000
+#define DENALI_CTL_50_DATA 0x00000000
+#define DENALI_CTL_51_DATA 0x00000000
+#define DENALI_CTL_52_DATA 0x00000000
+#define DENALI_CTL_53_DATA 0x00000000
+#define DENALI_CTL_54_DATA 0x00000000
+#define DENALI_CTL_55_DATA 0x00000000
+#define DENALI_CTL_56_DATA 0x00000000
+#define DENALI_CTL_57_DATA 0x00000000
+#define DENALI_CTL_58_DATA 0x00000000
+#define DENALI_CTL_59_DATA 0x00000000
+#define DENALI_CTL_60_DATA 0x00000424
+#define DENALI_CTL_61_DATA 0x00000201
+#define DENALI_CTL_62_DATA 0x00001008
+#define DENALI_CTL_63_DATA 0x00000000
+#define DENALI_CTL_64_DATA 0x00000200
+#define DENALI_CTL_65_DATA 0x00000800
+#define DENALI_CTL_66_DATA 0x00000481
+#define DENALI_CTL_67_DATA 0x00000400
+#define DENALI_CTL_68_DATA 0x00000424
+#define DENALI_CTL_69_DATA 0x00000201
+#define DENALI_CTL_70_DATA 0x00001008
+#define DENALI_CTL_71_DATA 0x00000000
+#define DENALI_CTL_72_DATA 0x00000200
+#define DENALI_CTL_73_DATA 0x00000800
+#define DENALI_CTL_74_DATA 0x00000481
+#define DENALI_CTL_75_DATA 0x00000400
+#define DENALI_CTL_76_DATA 0x01010000
+#define DENALI_CTL_77_DATA 0x00000000
+#define DENALI_CTL_78_DATA 0x00000000
+#define DENALI_CTL_79_DATA 0x00000000
+#define DENALI_CTL_80_DATA 0x00000000
+#define DENALI_CTL_81_DATA 0x00000000
+#define DENALI_CTL_82_DATA 0x00000000
+#define DENALI_CTL_83_DATA 0x00000000
+#define DENALI_CTL_84_DATA 0x00000000
+#define DENALI_CTL_85_DATA 0x00000000
+#define DENALI_CTL_86_DATA 0x00000000
+#define DENALI_CTL_87_DATA 0x00000000
+#define DENALI_CTL_88_DATA 0x00000000
+#define DENALI_CTL_89_DATA 0x00000000
+#define DENALI_CTL_90_DATA 0x00000000
+#define DENALI_CTL_91_DATA 0x00000000
+#define DENALI_CTL_92_DATA 0x00000000
+#define DENALI_CTL_93_DATA 0x00000000
+#define DENALI_CTL_94_DATA 0x00000000
+#define DENALI_CTL_95_DATA 0x00000000
+#define DENALI_CTL_96_DATA 0x00000000
+#define DENALI_CTL_97_DATA 0x00000000
+#define DENALI_CTL_98_DATA 0x00000000
+#define DENALI_CTL_99_DATA 0x00000000
+#define DENALI_CTL_100_DATA 0x00000000
+#define DENALI_CTL_101_DATA 0x00000000
+#define DENALI_CTL_102_DATA 0x00000000
+#define DENALI_CTL_103_DATA 0x00000000
+#define DENALI_CTL_104_DATA 0x00000000
+#define DENALI_CTL_105_DATA 0x00000003
+#define DENALI_CTL_106_DATA 0x00000000
+#define DENALI_CTL_107_DATA 0x00000000
+#define DENALI_CTL_108_DATA 0x00000000
+#define DENALI_CTL_109_DATA 0x00000000
+#define DENALI_CTL_110_DATA 0x01000000
+#define DENALI_CTL_111_DATA 0x00040000
+#define DENALI_CTL_112_DATA 0x00800200
+#define DENALI_CTL_113_DATA 0x00000200
+#define DENALI_CTL_114_DATA 0x00000040
+#define DENALI_CTL_115_DATA 0x01000100
+#define DENALI_CTL_116_DATA 0x0a000002
+#define DENALI_CTL_117_DATA 0x0101ffff
+#define DENALI_CTL_118_DATA 0x01010101
+#define DENALI_CTL_119_DATA 0x01010101
+#define DENALI_CTL_120_DATA 0x0000010b
+#define DENALI_CTL_121_DATA 0x00000c03
+#define DENALI_CTL_122_DATA 0x00000000
+#define DENALI_CTL_123_DATA 0x00000000
+#define DENALI_CTL_124_DATA 0x00000000
+#define DENALI_CTL_125_DATA 0x00000000
+#define DENALI_CTL_126_DATA 0x00030300
+#define DENALI_CTL_127_DATA 0x00000000
+#define DENALI_CTL_128_DATA 0x00010101
+#define DENALI_CTL_129_DATA 0x00000000
+#define DENALI_CTL_130_DATA 0x00000000
+#define DENALI_CTL_131_DATA 0x00000000
+#define DENALI_CTL_132_DATA 0x00000000
+#define DENALI_CTL_133_DATA 0x00000000
+#define DENALI_CTL_134_DATA 0x00000000
+#define DENALI_CTL_135_DATA 0x00000000
+#define DENALI_CTL_136_DATA 0x00000000
+#define DENALI_CTL_137_DATA 0x00000000
+#define DENALI_CTL_138_DATA 0x00000000
+#define DENALI_CTL_139_DATA 0x00000000
+#define DENALI_CTL_140_DATA 0x00000000
+#define DENALI_CTL_141_DATA 0x00000000
+#define DENALI_CTL_142_DATA 0x00000000
+#define DENALI_CTL_143_DATA 0x00000000
+#define DENALI_CTL_144_DATA 0x00000000
+#define DENALI_CTL_145_DATA 0x00000000
+#define DENALI_CTL_146_DATA 0x00000000
+#define DENALI_CTL_147_DATA 0x00000000
+#define DENALI_CTL_148_DATA 0x00000000
+#define DENALI_CTL_149_DATA 0x00000000
+#define DENALI_CTL_150_DATA 0x00000000
+#define DENALI_CTL_151_DATA 0x00000000
+#define DENALI_CTL_152_DATA 0x00000000
+#define DENALI_CTL_153_DATA 0x00000000
+#define DENALI_CTL_154_DATA 0x00000000
+#define DENALI_CTL_155_DATA 0x00000000
+#define DENALI_CTL_156_DATA 0x00000000
+#define DENALI_CTL_157_DATA 0x00000000
+#define DENALI_CTL_158_DATA 0x00000000
+#define DENALI_CTL_159_DATA 0x00000000
+#define DENALI_CTL_160_DATA 0x00000000
+#define DENALI_CTL_161_DATA 0x02010102
+#define DENALI_CTL_162_DATA 0x0108070d
+#define DENALI_CTL_163_DATA 0x05050300
+#define DENALI_CTL_164_DATA 0x04000503
+#define DENALI_CTL_165_DATA 0x00000000
+#define DENALI_CTL_166_DATA 0x00000000
+#define DENALI_CTL_167_DATA 0x00000000
+#define DENALI_CTL_168_DATA 0x00000000
+#define DENALI_CTL_169_DATA 0x280d0000
+#define DENALI_CTL_170_DATA 0x01000000
+#define DENALI_CTL_171_DATA 0x00000000
+#define DENALI_CTL_172_DATA 0x00030001
+#define DENALI_CTL_173_DATA 0x00000000
+#define DENALI_CTL_174_DATA 0x00000000
+#define DENALI_CTL_175_DATA 0x00000000
+#define DENALI_CTL_176_DATA 0x00000000
+#define DENALI_CTL_177_DATA 0x00000000
+#define DENALI_CTL_178_DATA 0x00000000
+#define DENALI_CTL_179_DATA 0x00000000
+#define DENALI_CTL_180_DATA 0x00000000
+#define DENALI_CTL_181_DATA 0x01000000
+#define DENALI_CTL_182_DATA 0x00000001
+#define DENALI_CTL_183_DATA 0x00000100
+#define DENALI_CTL_184_DATA 0x00010303
+#define DENALI_CTL_185_DATA 0x67676701
+#define DENALI_CTL_186_DATA 0x67676767
+#define DENALI_CTL_187_DATA 0x67676767
+#define DENALI_CTL_188_DATA 0x67676767
+#define DENALI_CTL_189_DATA 0x67676767
+#define DENALI_CTL_190_DATA 0x67676767
+#define DENALI_CTL_191_DATA 0x67676767
+#define DENALI_CTL_192_DATA 0x67676767
+#define DENALI_CTL_193_DATA 0x67676767
+#define DENALI_CTL_194_DATA 0x01000067
+#define DENALI_CTL_195_DATA 0x00000001
+#define DENALI_CTL_196_DATA 0x00000101
+#define DENALI_CTL_197_DATA 0x00000000
+#define DENALI_CTL_198_DATA 0x00000000
+#define DENALI_CTL_199_DATA 0x00000000
+#define DENALI_CTL_200_DATA 0x00000000
+#define DENALI_CTL_201_DATA 0x00000000
+#define DENALI_CTL_202_DATA 0x00000000
+#define DENALI_CTL_203_DATA 0x00000000
+#define DENALI_CTL_204_DATA 0x00000000
+#define DENALI_CTL_205_DATA 0x00000000
+#define DENALI_CTL_206_DATA 0x00000000
+#define DENALI_CTL_207_DATA 0x00000000
+#define DENALI_CTL_208_DATA 0x00000001
+#define DENALI_CTL_209_DATA 0x00000000
+#define DENALI_CTL_210_DATA 0x007fffff
+#define DENALI_CTL_211_DATA 0x00000000
+#define DENALI_CTL_212_DATA 0x007fffff
+#define DENALI_CTL_213_DATA 0x00000000
+#define DENALI_CTL_214_DATA 0x007fffff
+#define DENALI_CTL_215_DATA 0x00000000
+#define DENALI_CTL_216_DATA 0x007fffff
+#define DENALI_CTL_217_DATA 0x00000000
+#define DENALI_CTL_218_DATA 0x007fffff
+#define DENALI_CTL_219_DATA 0x00000000
+#define DENALI_CTL_220_DATA 0x007fffff
+#define DENALI_CTL_221_DATA 0x00000000
+#define DENALI_CTL_222_DATA 0x007fffff
+#define DENALI_CTL_223_DATA 0x00000000
+#define DENALI_CTL_224_DATA 0x037fffff
+#define DENALI_CTL_225_DATA 0xffffffff
+#define DENALI_CTL_226_DATA 0x000f000f
+#define DENALI_CTL_227_DATA 0x00ffff03
+#define DENALI_CTL_228_DATA 0x000fffff
+#define DENALI_CTL_229_DATA 0x0003000f
+#define DENALI_CTL_230_DATA 0xffffffff
+#define DENALI_CTL_231_DATA 0x000f000f
+#define DENALI_CTL_232_DATA 0x00ffff03
+#define DENALI_CTL_233_DATA 0x000fffff
+#define DENALI_CTL_234_DATA 0x0003000f
+#define DENALI_CTL_235_DATA 0xffffffff
+#define DENALI_CTL_236_DATA 0x000f000f
+#define DENALI_CTL_237_DATA 0x00ffff03
+#define DENALI_CTL_238_DATA 0x000fffff
+#define DENALI_CTL_239_DATA 0x0003000f
+#define DENALI_CTL_240_DATA 0xffffffff
+#define DENALI_CTL_241_DATA 0x000f000f
+#define DENALI_CTL_242_DATA 0x00ffff03
+#define DENALI_CTL_243_DATA 0x000fffff
+#define DENALI_CTL_244_DATA 0x6407000f
+#define DENALI_CTL_245_DATA 0x01640001
+#define DENALI_CTL_246_DATA 0x00000000
+#define DENALI_CTL_247_DATA 0x00000000
+#define DENALI_CTL_248_DATA 0x00001800
+#define DENALI_CTL_249_DATA 0x00386c05
+#define DENALI_CTL_250_DATA 0x02000200
+#define DENALI_CTL_251_DATA 0x02000200
+#define DENALI_CTL_252_DATA 0x0000386c
+#define DENALI_CTL_253_DATA 0x00023438
+#define DENALI_CTL_254_DATA 0x02020d0f
+#define DENALI_CTL_255_DATA 0x00140303
+#define DENALI_CTL_256_DATA 0x00000000
+#define DENALI_CTL_257_DATA 0x00000000
+#define DENALI_CTL_258_DATA 0x00001403
+#define DENALI_CTL_259_DATA 0x00000000
+#define DENALI_CTL_260_DATA 0x00000000
+#define DENALI_CTL_261_DATA 0x00000000
+#define DENALI_CTL_262_DATA 0x00000000
+#define DENALI_CTL_263_DATA 0x0c010000
+#define DENALI_CTL_264_DATA 0x00000008
diff --git a/src/soc/sifive/fu740/regconfig-phy.h b/src/soc/sifive/fu740/regconfig-phy.h
new file mode 100644
index 0000000..a173aec
--- /dev/null
+++ b/src/soc/sifive/fu740/regconfig-phy.h
@@ -0,0 +1,1224 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/*
+ * Only a very small amount of registers is documented inside the FU740-C000 Manual and the
+ * rest are basically magic values
+ * source: u-boot
+ * (C) Copyright 2020 SiFive, Inc
+ */
+
+#define DENALI_PHY_00_DATA 0x01375642
+#define DENALI_PHY_01_DATA 0x0004c008
+#define DENALI_PHY_02_DATA 0x000000da
+#define DENALI_PHY_03_DATA 0x00000000
+#define DENALI_PHY_04_DATA 0x00000000
+#define DENALI_PHY_05_DATA 0x00010000
+#define DENALI_PHY_06_DATA 0x01DDDD90
+#define DENALI_PHY_07_DATA 0x01DDDD90
+#define DENALI_PHY_08_DATA 0x01030001
+#define DENALI_PHY_09_DATA 0x01000000
+#define DENALI_PHY_10_DATA 0x00c00000
+#define DENALI_PHY_11_DATA 0x00000007
+#define DENALI_PHY_12_DATA 0x00000000
+#define DENALI_PHY_13_DATA 0x00000000
+#define DENALI_PHY_14_DATA 0x04000408
+#define DENALI_PHY_15_DATA 0x00000408
+#define DENALI_PHY_16_DATA 0x00e4e400
+#define DENALI_PHY_17_DATA 0x00000000
+#define DENALI_PHY_18_DATA 0x00000000
+#define DENALI_PHY_19_DATA 0x00000000
+#define DENALI_PHY_20_DATA 0x00000000
+#define DENALI_PHY_21_DATA 0x00000000
+#define DENALI_PHY_22_DATA 0x00000000
+#define DENALI_PHY_23_DATA 0x00000000
+#define DENALI_PHY_24_DATA 0x00000000
+#define DENALI_PHY_25_DATA 0x00000000
+#define DENALI_PHY_26_DATA 0x00000000
+#define DENALI_PHY_27_DATA 0x00000000
+#define DENALI_PHY_28_DATA 0x00000000
+#define DENALI_PHY_29_DATA 0x00000000
+#define DENALI_PHY_30_DATA 0x00000000
+#define DENALI_PHY_31_DATA 0x00000000
+#define DENALI_PHY_32_DATA 0x00000000
+#define DENALI_PHY_33_DATA 0x00200000
+#define DENALI_PHY_34_DATA 0x00000000
+#define DENALI_PHY_35_DATA 0x00000000
+#define DENALI_PHY_36_DATA 0x00000000
+#define DENALI_PHY_37_DATA 0x00000000
+#define DENALI_PHY_38_DATA 0x00000000
+#define DENALI_PHY_39_DATA 0x00000000
+#define DENALI_PHY_40_DATA 0x02800280
+#define DENALI_PHY_41_DATA 0x02800280
+#define DENALI_PHY_42_DATA 0x02800280
+#define DENALI_PHY_43_DATA 0x02800280
+#define DENALI_PHY_44_DATA 0x00000280
+#define DENALI_PHY_45_DATA 0x00000000
+#define DENALI_PHY_46_DATA 0x00000000
+#define DENALI_PHY_47_DATA 0x00000000
+#define DENALI_PHY_48_DATA 0x00000000
+#define DENALI_PHY_49_DATA 0x00000000
+#define DENALI_PHY_50_DATA 0x00800080
+#define DENALI_PHY_51_DATA 0x00800080
+#define DENALI_PHY_52_DATA 0x00800080
+#define DENALI_PHY_53_DATA 0x00800080
+#define DENALI_PHY_54_DATA 0x00800080
+#define DENALI_PHY_55_DATA 0x00800080
+#define DENALI_PHY_56_DATA 0x00800080
+#define DENALI_PHY_57_DATA 0x00800080
+#define DENALI_PHY_58_DATA 0x00800080
+#define DENALI_PHY_59_DATA 0x000100da
+#define DENALI_PHY_60_DATA 0x01ff0010
+#define DENALI_PHY_61_DATA 0x00000000
+#define DENALI_PHY_62_DATA 0x00000000
+#define DENALI_PHY_63_DATA 0x00000002
+#define DENALI_PHY_64_DATA 0x51313152
+#define DENALI_PHY_65_DATA 0x80013130
+#define DENALI_PHY_66_DATA 0x02000080
+#define DENALI_PHY_67_DATA 0x00100001
+#define DENALI_PHY_68_DATA 0x0c064208
+#define DENALI_PHY_69_DATA 0x000f0c0f
+#define DENALI_PHY_70_DATA 0x01000140
+#define DENALI_PHY_71_DATA 0x0000000c
+#define DENALI_PHY_72_DATA 0x00000000
+#define DENALI_PHY_73_DATA 0x00000000
+#define DENALI_PHY_74_DATA 0x00000000
+#define DENALI_PHY_75_DATA 0x00000000
+#define DENALI_PHY_76_DATA 0x00000000
+#define DENALI_PHY_77_DATA 0x00000000
+#define DENALI_PHY_78_DATA 0x00000000
+#define DENALI_PHY_79_DATA 0x00000000
+#define DENALI_PHY_80_DATA 0x00000000
+#define DENALI_PHY_81_DATA 0x00000000
+#define DENALI_PHY_82_DATA 0x00000000
+#define DENALI_PHY_83_DATA 0x00000000
+#define DENALI_PHY_84_DATA 0x00000000
+#define DENALI_PHY_85_DATA 0x00000000
+#define DENALI_PHY_86_DATA 0x00000000
+#define DENALI_PHY_87_DATA 0x00000000
+#define DENALI_PHY_88_DATA 0x00000000
+#define DENALI_PHY_89_DATA 0x00000000
+#define DENALI_PHY_90_DATA 0x00000000
+#define DENALI_PHY_91_DATA 0x00000000
+#define DENALI_PHY_92_DATA 0x00000000
+#define DENALI_PHY_93_DATA 0x00000000
+#define DENALI_PHY_94_DATA 0x00000000
+#define DENALI_PHY_95_DATA 0x00000000
+#define DENALI_PHY_96_DATA 0x00000000
+#define DENALI_PHY_97_DATA 0x00000000
+#define DENALI_PHY_98_DATA 0x00000000
+#define DENALI_PHY_99_DATA 0x00000000
+#define DENALI_PHY_100_DATA 0x00000000
+#define DENALI_PHY_101_DATA 0x00000000
+#define DENALI_PHY_102_DATA 0x00000000
+#define DENALI_PHY_103_DATA 0x00000000
+#define DENALI_PHY_104_DATA 0x00000000
+#define DENALI_PHY_105_DATA 0x00000000
+#define DENALI_PHY_106_DATA 0x00000000
+#define DENALI_PHY_107_DATA 0x00000000
+#define DENALI_PHY_108_DATA 0x00000000
+#define DENALI_PHY_109_DATA 0x00000000
+#define DENALI_PHY_110_DATA 0x00000000
+#define DENALI_PHY_111_DATA 0x00000000
+#define DENALI_PHY_112_DATA 0x00000000
+#define DENALI_PHY_113_DATA 0x00000000
+#define DENALI_PHY_114_DATA 0x00000000
+#define DENALI_PHY_115_DATA 0x00000000
+#define DENALI_PHY_116_DATA 0x00000000
+#define DENALI_PHY_117_DATA 0x00000000
+#define DENALI_PHY_118_DATA 0x00000000
+#define DENALI_PHY_119_DATA 0x00000000
+#define DENALI_PHY_120_DATA 0x00000000
+#define DENALI_PHY_121_DATA 0x00000000
+#define DENALI_PHY_122_DATA 0x00000000
+#define DENALI_PHY_123_DATA 0x00000000
+#define DENALI_PHY_124_DATA 0x00000000
+#define DENALI_PHY_125_DATA 0x00000000
+#define DENALI_PHY_126_DATA 0x00000000
+#define DENALI_PHY_127_DATA 0x00000000
+#define DENALI_PHY_128_DATA 0x40263571
+#define DENALI_PHY_129_DATA 0x0004c008
+#define DENALI_PHY_130_DATA 0x000000da
+#define DENALI_PHY_131_DATA 0x00000000
+#define DENALI_PHY_132_DATA 0x00000000
+#define DENALI_PHY_133_DATA 0x00010000
+#define DENALI_PHY_134_DATA 0x01DDDD90
+#define DENALI_PHY_135_DATA 0x01DDDD90
+#define DENALI_PHY_136_DATA 0x01030001
+#define DENALI_PHY_137_DATA 0x01000000
+#define DENALI_PHY_138_DATA 0x00c00000
+#define DENALI_PHY_139_DATA 0x00000007
+#define DENALI_PHY_140_DATA 0x00000000
+#define DENALI_PHY_141_DATA 0x00000000
+#define DENALI_PHY_142_DATA 0x04000408
+#define DENALI_PHY_143_DATA 0x00000408
+#define DENALI_PHY_144_DATA 0x00e4e400
+#define DENALI_PHY_145_DATA 0x00000000
+#define DENALI_PHY_146_DATA 0x00000000
+#define DENALI_PHY_147_DATA 0x00000000
+#define DENALI_PHY_148_DATA 0x00000000
+#define DENALI_PHY_149_DATA 0x00000000
+#define DENALI_PHY_150_DATA 0x00000000
+#define DENALI_PHY_151_DATA 0x00000000
+#define DENALI_PHY_152_DATA 0x00000000
+#define DENALI_PHY_153_DATA 0x00000000
+#define DENALI_PHY_154_DATA 0x00000000
+#define DENALI_PHY_155_DATA 0x00000000
+#define DENALI_PHY_156_DATA 0x00000000
+#define DENALI_PHY_157_DATA 0x00000000
+#define DENALI_PHY_158_DATA 0x00000000
+#define DENALI_PHY_159_DATA 0x00000000
+#define DENALI_PHY_160_DATA 0x00000000
+#define DENALI_PHY_161_DATA 0x00200000
+#define DENALI_PHY_162_DATA 0x00000000
+#define DENALI_PHY_163_DATA 0x00000000
+#define DENALI_PHY_164_DATA 0x00000000
+#define DENALI_PHY_165_DATA 0x00000000
+#define DENALI_PHY_166_DATA 0x00000000
+#define DENALI_PHY_167_DATA 0x00000000
+#define DENALI_PHY_168_DATA 0x02800280
+#define DENALI_PHY_169_DATA 0x02800280
+#define DENALI_PHY_170_DATA 0x02800280
+#define DENALI_PHY_171_DATA 0x02800280
+#define DENALI_PHY_172_DATA 0x00000280
+#define DENALI_PHY_173_DATA 0x00000000
+#define DENALI_PHY_174_DATA 0x00000000
+#define DENALI_PHY_175_DATA 0x00000000
+#define DENALI_PHY_176_DATA 0x00000000
+#define DENALI_PHY_177_DATA 0x00000000
+#define DENALI_PHY_178_DATA 0x00800080
+#define DENALI_PHY_179_DATA 0x00800080
+#define DENALI_PHY_180_DATA 0x00800080
+#define DENALI_PHY_181_DATA 0x00800080
+#define DENALI_PHY_182_DATA 0x00800080
+#define DENALI_PHY_183_DATA 0x00800080
+#define DENALI_PHY_184_DATA 0x00800080
+#define DENALI_PHY_185_DATA 0x00800080
+#define DENALI_PHY_186_DATA 0x00800080
+#define DENALI_PHY_187_DATA 0x000100da
+#define DENALI_PHY_188_DATA 0x01ff0010
+#define DENALI_PHY_189_DATA 0x00000000
+#define DENALI_PHY_190_DATA 0x00000000
+#define DENALI_PHY_191_DATA 0x00000002
+#define DENALI_PHY_192_DATA 0x51313152
+#define DENALI_PHY_193_DATA 0x80013130
+#define DENALI_PHY_194_DATA 0x02000080
+#define DENALI_PHY_195_DATA 0x00100001
+#define DENALI_PHY_196_DATA 0x0c064208
+#define DENALI_PHY_197_DATA 0x000f0c0f
+#define DENALI_PHY_198_DATA 0x01000140
+#define DENALI_PHY_199_DATA 0x0000000c
+#define DENALI_PHY_200_DATA 0x00000000
+#define DENALI_PHY_201_DATA 0x00000000
+#define DENALI_PHY_202_DATA 0x00000000
+#define DENALI_PHY_203_DATA 0x00000000
+#define DENALI_PHY_204_DATA 0x00000000
+#define DENALI_PHY_205_DATA 0x00000000
+#define DENALI_PHY_206_DATA 0x00000000
+#define DENALI_PHY_207_DATA 0x00000000
+#define DENALI_PHY_208_DATA 0x00000000
+#define DENALI_PHY_209_DATA 0x00000000
+#define DENALI_PHY_210_DATA 0x00000000
+#define DENALI_PHY_211_DATA 0x00000000
+#define DENALI_PHY_212_DATA 0x00000000
+#define DENALI_PHY_213_DATA 0x00000000
+#define DENALI_PHY_214_DATA 0x00000000
+#define DENALI_PHY_215_DATA 0x00000000
+#define DENALI_PHY_216_DATA 0x00000000
+#define DENALI_PHY_217_DATA 0x00000000
+#define DENALI_PHY_218_DATA 0x00000000
+#define DENALI_PHY_219_DATA 0x00000000
+#define DENALI_PHY_220_DATA 0x00000000
+#define DENALI_PHY_221_DATA 0x00000000
+#define DENALI_PHY_222_DATA 0x00000000
+#define DENALI_PHY_223_DATA 0x00000000
+#define DENALI_PHY_224_DATA 0x00000000
+#define DENALI_PHY_225_DATA 0x00000000
+#define DENALI_PHY_226_DATA 0x00000000
+#define DENALI_PHY_227_DATA 0x00000000
+#define DENALI_PHY_228_DATA 0x00000000
+#define DENALI_PHY_229_DATA 0x00000000
+#define DENALI_PHY_230_DATA 0x00000000
+#define DENALI_PHY_231_DATA 0x00000000
+#define DENALI_PHY_232_DATA 0x00000000
+#define DENALI_PHY_233_DATA 0x00000000
+#define DENALI_PHY_234_DATA 0x00000000
+#define DENALI_PHY_235_DATA 0x00000000
+#define DENALI_PHY_236_DATA 0x00000000
+#define DENALI_PHY_237_DATA 0x00000000
+#define DENALI_PHY_238_DATA 0x00000000
+#define DENALI_PHY_239_DATA 0x00000000
+#define DENALI_PHY_240_DATA 0x00000000
+#define DENALI_PHY_241_DATA 0x00000000
+#define DENALI_PHY_242_DATA 0x00000000
+#define DENALI_PHY_243_DATA 0x00000000
+#define DENALI_PHY_244_DATA 0x00000000
+#define DENALI_PHY_245_DATA 0x00000000
+#define DENALI_PHY_246_DATA 0x00000000
+#define DENALI_PHY_247_DATA 0x00000000
+#define DENALI_PHY_248_DATA 0x00000000
+#define DENALI_PHY_249_DATA 0x00000000
+#define DENALI_PHY_250_DATA 0x00000000
+#define DENALI_PHY_251_DATA 0x00000000
+#define DENALI_PHY_252_DATA 0x00000000
+#define DENALI_PHY_253_DATA 0x00000000
+#define DENALI_PHY_254_DATA 0x00000000
+#define DENALI_PHY_255_DATA 0x00000000
+#define DENALI_PHY_256_DATA 0x46052371
+#define DENALI_PHY_257_DATA 0x0004c008
+#define DENALI_PHY_258_DATA 0x000000da
+#define DENALI_PHY_259_DATA 0x00000000
+#define DENALI_PHY_260_DATA 0x00000000
+#define DENALI_PHY_261_DATA 0x00010000
+#define DENALI_PHY_262_DATA 0x01DDDD90
+#define DENALI_PHY_263_DATA 0x01DDDD90
+#define DENALI_PHY_264_DATA 0x01030001
+#define DENALI_PHY_265_DATA 0x01000000
+#define DENALI_PHY_266_DATA 0x00c00000
+#define DENALI_PHY_267_DATA 0x00000007
+#define DENALI_PHY_268_DATA 0x00000000
+#define DENALI_PHY_269_DATA 0x00000000
+#define DENALI_PHY_270_DATA 0x04000408
+#define DENALI_PHY_271_DATA 0x00000408
+#define DENALI_PHY_272_DATA 0x00e4e400
+#define DENALI_PHY_273_DATA 0x00000000
+#define DENALI_PHY_274_DATA 0x00000000
+#define DENALI_PHY_275_DATA 0x00000000
+#define DENALI_PHY_276_DATA 0x00000000
+#define DENALI_PHY_277_DATA 0x00000000
+#define DENALI_PHY_278_DATA 0x00000000
+#define DENALI_PHY_279_DATA 0x00000000
+#define DENALI_PHY_280_DATA 0x00000000
+#define DENALI_PHY_281_DATA 0x00000000
+#define DENALI_PHY_282_DATA 0x00000000
+#define DENALI_PHY_283_DATA 0x00000000
+#define DENALI_PHY_284_DATA 0x00000000
+#define DENALI_PHY_285_DATA 0x00000000
+#define DENALI_PHY_286_DATA 0x00000000
+#define DENALI_PHY_287_DATA 0x00000000
+#define DENALI_PHY_288_DATA 0x00000000
+#define DENALI_PHY_289_DATA 0x00200000
+#define DENALI_PHY_290_DATA 0x00000000
+#define DENALI_PHY_291_DATA 0x00000000
+#define DENALI_PHY_292_DATA 0x00000000
+#define DENALI_PHY_293_DATA 0x00000000
+#define DENALI_PHY_294_DATA 0x00000000
+#define DENALI_PHY_295_DATA 0x00000000
+#define DENALI_PHY_296_DATA 0x02800280
+#define DENALI_PHY_297_DATA 0x02800280
+#define DENALI_PHY_298_DATA 0x02800280
+#define DENALI_PHY_299_DATA 0x02800280
+#define DENALI_PHY_300_DATA 0x00000280
+#define DENALI_PHY_301_DATA 0x00000000
+#define DENALI_PHY_302_DATA 0x00000000
+#define DENALI_PHY_303_DATA 0x00000000
+#define DENALI_PHY_304_DATA 0x00000000
+#define DENALI_PHY_305_DATA 0x00000000
+#define DENALI_PHY_306_DATA 0x00800080
+#define DENALI_PHY_307_DATA 0x00800080
+#define DENALI_PHY_308_DATA 0x00800080
+#define DENALI_PHY_309_DATA 0x00800080
+#define DENALI_PHY_310_DATA 0x00800080
+#define DENALI_PHY_311_DATA 0x00800080
+#define DENALI_PHY_312_DATA 0x00800080
+#define DENALI_PHY_313_DATA 0x00800080
+#define DENALI_PHY_314_DATA 0x00800080
+#define DENALI_PHY_315_DATA 0x000100da
+#define DENALI_PHY_316_DATA 0x01ff0010
+#define DENALI_PHY_317_DATA 0x00000000
+#define DENALI_PHY_318_DATA 0x00000000
+#define DENALI_PHY_319_DATA 0x00000002
+#define DENALI_PHY_320_DATA 0x51313152
+#define DENALI_PHY_321_DATA 0x80013130
+#define DENALI_PHY_322_DATA 0x02000080
+#define DENALI_PHY_323_DATA 0x00100001
+#define DENALI_PHY_324_DATA 0x0c064208
+#define DENALI_PHY_325_DATA 0x000f0c0f
+#define DENALI_PHY_326_DATA 0x01000140
+#define DENALI_PHY_327_DATA 0x0000000c
+#define DENALI_PHY_328_DATA 0x00000000
+#define DENALI_PHY_329_DATA 0x00000000
+#define DENALI_PHY_330_DATA 0x00000000
+#define DENALI_PHY_331_DATA 0x00000000
+#define DENALI_PHY_332_DATA 0x00000000
+#define DENALI_PHY_333_DATA 0x00000000
+#define DENALI_PHY_334_DATA 0x00000000
+#define DENALI_PHY_335_DATA 0x00000000
+#define DENALI_PHY_336_DATA 0x00000000
+#define DENALI_PHY_337_DATA 0x00000000
+#define DENALI_PHY_338_DATA 0x00000000
+#define DENALI_PHY_339_DATA 0x00000000
+#define DENALI_PHY_340_DATA 0x00000000
+#define DENALI_PHY_341_DATA 0x00000000
+#define DENALI_PHY_342_DATA 0x00000000
+#define DENALI_PHY_343_DATA 0x00000000
+#define DENALI_PHY_344_DATA 0x00000000
+#define DENALI_PHY_345_DATA 0x00000000
+#define DENALI_PHY_346_DATA 0x00000000
+#define DENALI_PHY_347_DATA 0x00000000
+#define DENALI_PHY_348_DATA 0x00000000
+#define DENALI_PHY_349_DATA 0x00000000
+#define DENALI_PHY_350_DATA 0x00000000
+#define DENALI_PHY_351_DATA 0x00000000
+#define DENALI_PHY_352_DATA 0x00000000
+#define DENALI_PHY_353_DATA 0x00000000
+#define DENALI_PHY_354_DATA 0x00000000
+#define DENALI_PHY_355_DATA 0x00000000
+#define DENALI_PHY_356_DATA 0x00000000
+#define DENALI_PHY_357_DATA 0x00000000
+#define DENALI_PHY_358_DATA 0x00000000
+#define DENALI_PHY_359_DATA 0x00000000
+#define DENALI_PHY_360_DATA 0x00000000
+#define DENALI_PHY_361_DATA 0x00000000
+#define DENALI_PHY_362_DATA 0x00000000
+#define DENALI_PHY_363_DATA 0x00000000
+#define DENALI_PHY_364_DATA 0x00000000
+#define DENALI_PHY_365_DATA 0x00000000
+#define DENALI_PHY_366_DATA 0x00000000
+#define DENALI_PHY_367_DATA 0x00000000
+#define DENALI_PHY_368_DATA 0x00000000
+#define DENALI_PHY_369_DATA 0x00000000
+#define DENALI_PHY_370_DATA 0x00000000
+#define DENALI_PHY_371_DATA 0x00000000
+#define DENALI_PHY_372_DATA 0x00000000
+#define DENALI_PHY_373_DATA 0x00000000
+#define DENALI_PHY_374_DATA 0x00000000
+#define DENALI_PHY_375_DATA 0x00000000
+#define DENALI_PHY_376_DATA 0x00000000
+#define DENALI_PHY_377_DATA 0x00000000
+#define DENALI_PHY_378_DATA 0x00000000
+#define DENALI_PHY_379_DATA 0x00000000
+#define DENALI_PHY_380_DATA 0x00000000
+#define DENALI_PHY_381_DATA 0x00000000
+#define DENALI_PHY_382_DATA 0x00000000
+#define DENALI_PHY_383_DATA 0x00000000
+#define DENALI_PHY_384_DATA 0x37651240
+#define DENALI_PHY_385_DATA 0x0004c008
+#define DENALI_PHY_386_DATA 0x000000da
+#define DENALI_PHY_387_DATA 0x00000000
+#define DENALI_PHY_388_DATA 0x00000000
+#define DENALI_PHY_389_DATA 0x00010000
+#define DENALI_PHY_390_DATA 0x01DDDD90
+#define DENALI_PHY_391_DATA 0x01DDDD90
+#define DENALI_PHY_392_DATA 0x01030001
+#define DENALI_PHY_393_DATA 0x01000000
+#define DENALI_PHY_394_DATA 0x00c00000
+#define DENALI_PHY_395_DATA 0x00000007
+#define DENALI_PHY_396_DATA 0x00000000
+#define DENALI_PHY_397_DATA 0x00000000
+#define DENALI_PHY_398_DATA 0x04000408
+#define DENALI_PHY_399_DATA 0x00000408
+#define DENALI_PHY_400_DATA 0x00e4e400
+#define DENALI_PHY_401_DATA 0x00000000
+#define DENALI_PHY_402_DATA 0x00000000
+#define DENALI_PHY_403_DATA 0x00000000
+#define DENALI_PHY_404_DATA 0x00000000
+#define DENALI_PHY_405_DATA 0x00000000
+#define DENALI_PHY_406_DATA 0x00000000
+#define DENALI_PHY_407_DATA 0x00000000
+#define DENALI_PHY_408_DATA 0x00000000
+#define DENALI_PHY_409_DATA 0x00000000
+#define DENALI_PHY_410_DATA 0x00000000
+#define DENALI_PHY_411_DATA 0x00000000
+#define DENALI_PHY_412_DATA 0x00000000
+#define DENALI_PHY_413_DATA 0x00000000
+#define DENALI_PHY_414_DATA 0x00000000
+#define DENALI_PHY_415_DATA 0x00000000
+#define DENALI_PHY_416_DATA 0x00000000
+#define DENALI_PHY_417_DATA 0x00200000
+#define DENALI_PHY_418_DATA 0x00000000
+#define DENALI_PHY_419_DATA 0x00000000
+#define DENALI_PHY_420_DATA 0x00000000
+#define DENALI_PHY_421_DATA 0x00000000
+#define DENALI_PHY_422_DATA 0x00000000
+#define DENALI_PHY_423_DATA 0x00000000
+#define DENALI_PHY_424_DATA 0x02800280
+#define DENALI_PHY_425_DATA 0x02800280
+#define DENALI_PHY_426_DATA 0x02800280
+#define DENALI_PHY_427_DATA 0x02800280
+#define DENALI_PHY_428_DATA 0x00000280
+#define DENALI_PHY_429_DATA 0x00000000
+#define DENALI_PHY_430_DATA 0x00000000
+#define DENALI_PHY_431_DATA 0x00000000
+#define DENALI_PHY_432_DATA 0x00000000
+#define DENALI_PHY_433_DATA 0x00000000
+#define DENALI_PHY_434_DATA 0x00800080
+#define DENALI_PHY_435_DATA 0x00800080
+#define DENALI_PHY_436_DATA 0x00800080
+#define DENALI_PHY_437_DATA 0x00800080
+#define DENALI_PHY_438_DATA 0x00800080
+#define DENALI_PHY_439_DATA 0x00800080
+#define DENALI_PHY_440_DATA 0x00800080
+#define DENALI_PHY_441_DATA 0x00800080
+#define DENALI_PHY_442_DATA 0x00800080
+#define DENALI_PHY_443_DATA 0x000100da
+#define DENALI_PHY_444_DATA 0x01ff0010
+#define DENALI_PHY_445_DATA 0x00000000
+#define DENALI_PHY_446_DATA 0x00000000
+#define DENALI_PHY_447_DATA 0x00000002
+#define DENALI_PHY_448_DATA 0x51313152
+#define DENALI_PHY_449_DATA 0x80013130
+#define DENALI_PHY_450_DATA 0x02000080
+#define DENALI_PHY_451_DATA 0x00100001
+#define DENALI_PHY_452_DATA 0x0c064208
+#define DENALI_PHY_453_DATA 0x000f0c0f
+#define DENALI_PHY_454_DATA 0x01000140
+#define DENALI_PHY_455_DATA 0x0000000c
+#define DENALI_PHY_456_DATA 0x00000000
+#define DENALI_PHY_457_DATA 0x00000000
+#define DENALI_PHY_458_DATA 0x00000000
+#define DENALI_PHY_459_DATA 0x00000000
+#define DENALI_PHY_460_DATA 0x00000000
+#define DENALI_PHY_461_DATA 0x00000000
+#define DENALI_PHY_462_DATA 0x00000000
+#define DENALI_PHY_463_DATA 0x00000000
+#define DENALI_PHY_464_DATA 0x00000000
+#define DENALI_PHY_465_DATA 0x00000000
+#define DENALI_PHY_466_DATA 0x00000000
+#define DENALI_PHY_467_DATA 0x00000000
+#define DENALI_PHY_468_DATA 0x00000000
+#define DENALI_PHY_469_DATA 0x00000000
+#define DENALI_PHY_470_DATA 0x00000000
+#define DENALI_PHY_471_DATA 0x00000000
+#define DENALI_PHY_472_DATA 0x00000000
+#define DENALI_PHY_473_DATA 0x00000000
+#define DENALI_PHY_474_DATA 0x00000000
+#define DENALI_PHY_475_DATA 0x00000000
+#define DENALI_PHY_476_DATA 0x00000000
+#define DENALI_PHY_477_DATA 0x00000000
+#define DENALI_PHY_478_DATA 0x00000000
+#define DENALI_PHY_479_DATA 0x00000000
+#define DENALI_PHY_480_DATA 0x00000000
+#define DENALI_PHY_481_DATA 0x00000000
+#define DENALI_PHY_482_DATA 0x00000000
+#define DENALI_PHY_483_DATA 0x00000000
+#define DENALI_PHY_484_DATA 0x00000000
+#define DENALI_PHY_485_DATA 0x00000000
+#define DENALI_PHY_486_DATA 0x00000000
+#define DENALI_PHY_487_DATA 0x00000000
+#define DENALI_PHY_488_DATA 0x00000000
+#define DENALI_PHY_489_DATA 0x00000000
+#define DENALI_PHY_490_DATA 0x00000000
+#define DENALI_PHY_491_DATA 0x00000000
+#define DENALI_PHY_492_DATA 0x00000000
+#define DENALI_PHY_493_DATA 0x00000000
+#define DENALI_PHY_494_DATA 0x00000000
+#define DENALI_PHY_495_DATA 0x00000000
+#define DENALI_PHY_496_DATA 0x00000000
+#define DENALI_PHY_497_DATA 0x00000000
+#define DENALI_PHY_498_DATA 0x00000000
+#define DENALI_PHY_499_DATA 0x00000000
+#define DENALI_PHY_500_DATA 0x00000000
+#define DENALI_PHY_501_DATA 0x00000000
+#define DENALI_PHY_502_DATA 0x00000000
+#define DENALI_PHY_503_DATA 0x00000000
+#define DENALI_PHY_504_DATA 0x00000000
+#define DENALI_PHY_505_DATA 0x00000000
+#define DENALI_PHY_506_DATA 0x00000000
+#define DENALI_PHY_507_DATA 0x00000000
+#define DENALI_PHY_508_DATA 0x00000000
+#define DENALI_PHY_509_DATA 0x00000000
+#define DENALI_PHY_510_DATA 0x00000000
+#define DENALI_PHY_511_DATA 0x00000000
+#define DENALI_PHY_512_DATA 0x34216750
+#define DENALI_PHY_513_DATA 0x0004c008
+#define DENALI_PHY_514_DATA 0x000000da
+#define DENALI_PHY_515_DATA 0x00000000
+#define DENALI_PHY_516_DATA 0x00000000
+#define DENALI_PHY_517_DATA 0x00010000
+#define DENALI_PHY_518_DATA 0x01DDDD90
+#define DENALI_PHY_519_DATA 0x01DDDD90
+#define DENALI_PHY_520_DATA 0x01030001
+#define DENALI_PHY_521_DATA 0x01000000
+#define DENALI_PHY_522_DATA 0x00c00000
+#define DENALI_PHY_523_DATA 0x00000007
+#define DENALI_PHY_524_DATA 0x00000000
+#define DENALI_PHY_525_DATA 0x00000000
+#define DENALI_PHY_526_DATA 0x04000408
+#define DENALI_PHY_527_DATA 0x00000408
+#define DENALI_PHY_528_DATA 0x00e4e400
+#define DENALI_PHY_529_DATA 0x00000000
+#define DENALI_PHY_530_DATA 0x00000000
+#define DENALI_PHY_531_DATA 0x00000000
+#define DENALI_PHY_532_DATA 0x00000000
+#define DENALI_PHY_533_DATA 0x00000000
+#define DENALI_PHY_534_DATA 0x00000000
+#define DENALI_PHY_535_DATA 0x00000000
+#define DENALI_PHY_536_DATA 0x00000000
+#define DENALI_PHY_537_DATA 0x00000000
+#define DENALI_PHY_538_DATA 0x00000000
+#define DENALI_PHY_539_DATA 0x00000000
+#define DENALI_PHY_540_DATA 0x00000000
+#define DENALI_PHY_541_DATA 0x00000000
+#define DENALI_PHY_542_DATA 0x00000000
+#define DENALI_PHY_543_DATA 0x00000000
+#define DENALI_PHY_544_DATA 0x00000000
+#define DENALI_PHY_545_DATA 0x00200000
+#define DENALI_PHY_546_DATA 0x00000000
+#define DENALI_PHY_547_DATA 0x00000000
+#define DENALI_PHY_548_DATA 0x00000000
+#define DENALI_PHY_549_DATA 0x00000000
+#define DENALI_PHY_550_DATA 0x00000000
+#define DENALI_PHY_551_DATA 0x00000000
+#define DENALI_PHY_552_DATA 0x02800280
+#define DENALI_PHY_553_DATA 0x02800280
+#define DENALI_PHY_554_DATA 0x02800280
+#define DENALI_PHY_555_DATA 0x02800280
+#define DENALI_PHY_556_DATA 0x00000280
+#define DENALI_PHY_557_DATA 0x00000000
+#define DENALI_PHY_558_DATA 0x00000000
+#define DENALI_PHY_559_DATA 0x00000000
+#define DENALI_PHY_560_DATA 0x00000000
+#define DENALI_PHY_561_DATA 0x00000000
+#define DENALI_PHY_562_DATA 0x00800080
+#define DENALI_PHY_563_DATA 0x00800080
+#define DENALI_PHY_564_DATA 0x00800080
+#define DENALI_PHY_565_DATA 0x00800080
+#define DENALI_PHY_566_DATA 0x00800080
+#define DENALI_PHY_567_DATA 0x00800080
+#define DENALI_PHY_568_DATA 0x00800080
+#define DENALI_PHY_569_DATA 0x00800080
+#define DENALI_PHY_570_DATA 0x00800080
+#define DENALI_PHY_571_DATA 0x000100da
+#define DENALI_PHY_572_DATA 0x01ff0010
+#define DENALI_PHY_573_DATA 0x00000000
+#define DENALI_PHY_574_DATA 0x00000000
+#define DENALI_PHY_575_DATA 0x00000002
+#define DENALI_PHY_576_DATA 0x51313152
+#define DENALI_PHY_577_DATA 0x80013130
+#define DENALI_PHY_578_DATA 0x02000080
+#define DENALI_PHY_579_DATA 0x00100001
+#define DENALI_PHY_580_DATA 0x0c064208
+#define DENALI_PHY_581_DATA 0x000f0c0f
+#define DENALI_PHY_582_DATA 0x01000140
+#define DENALI_PHY_583_DATA 0x0000000c
+#define DENALI_PHY_584_DATA 0x00000000
+#define DENALI_PHY_585_DATA 0x00000000
+#define DENALI_PHY_586_DATA 0x00000000
+#define DENALI_PHY_587_DATA 0x00000000
+#define DENALI_PHY_588_DATA 0x00000000
+#define DENALI_PHY_589_DATA 0x00000000
+#define DENALI_PHY_590_DATA 0x00000000
+#define DENALI_PHY_591_DATA 0x00000000
+#define DENALI_PHY_592_DATA 0x00000000
+#define DENALI_PHY_593_DATA 0x00000000
+#define DENALI_PHY_594_DATA 0x00000000
+#define DENALI_PHY_595_DATA 0x00000000
+#define DENALI_PHY_596_DATA 0x00000000
+#define DENALI_PHY_597_DATA 0x00000000
+#define DENALI_PHY_598_DATA 0x00000000
+#define DENALI_PHY_599_DATA 0x00000000
+#define DENALI_PHY_600_DATA 0x00000000
+#define DENALI_PHY_601_DATA 0x00000000
+#define DENALI_PHY_602_DATA 0x00000000
+#define DENALI_PHY_603_DATA 0x00000000
+#define DENALI_PHY_604_DATA 0x00000000
+#define DENALI_PHY_605_DATA 0x00000000
+#define DENALI_PHY_606_DATA 0x00000000
+#define DENALI_PHY_607_DATA 0x00000000
+#define DENALI_PHY_608_DATA 0x00000000
+#define DENALI_PHY_609_DATA 0x00000000
+#define DENALI_PHY_610_DATA 0x00000000
+#define DENALI_PHY_611_DATA 0x00000000
+#define DENALI_PHY_612_DATA 0x00000000
+#define DENALI_PHY_613_DATA 0x00000000
+#define DENALI_PHY_614_DATA 0x00000000
+#define DENALI_PHY_615_DATA 0x00000000
+#define DENALI_PHY_616_DATA 0x00000000
+#define DENALI_PHY_617_DATA 0x00000000
+#define DENALI_PHY_618_DATA 0x00000000
+#define DENALI_PHY_619_DATA 0x00000000
+#define DENALI_PHY_620_DATA 0x00000000
+#define DENALI_PHY_621_DATA 0x00000000
+#define DENALI_PHY_622_DATA 0x00000000
+#define DENALI_PHY_623_DATA 0x00000000
+#define DENALI_PHY_624_DATA 0x00000000
+#define DENALI_PHY_625_DATA 0x00000000
+#define DENALI_PHY_626_DATA 0x00000000
+#define DENALI_PHY_627_DATA 0x00000000
+#define DENALI_PHY_628_DATA 0x00000000
+#define DENALI_PHY_629_DATA 0x00000000
+#define DENALI_PHY_630_DATA 0x00000000
+#define DENALI_PHY_631_DATA 0x00000000
+#define DENALI_PHY_632_DATA 0x00000000
+#define DENALI_PHY_633_DATA 0x00000000
+#define DENALI_PHY_634_DATA 0x00000000
+#define DENALI_PHY_635_DATA 0x00000000
+#define DENALI_PHY_636_DATA 0x00000000
+#define DENALI_PHY_637_DATA 0x00000000
+#define DENALI_PHY_638_DATA 0x00000000
+#define DENALI_PHY_639_DATA 0x00000000
+#define DENALI_PHY_640_DATA 0x35176402
+#define DENALI_PHY_641_DATA 0x0004c008
+#define DENALI_PHY_642_DATA 0x000000da
+#define DENALI_PHY_643_DATA 0x00000000
+#define DENALI_PHY_644_DATA 0x00000000
+#define DENALI_PHY_645_DATA 0x00010000
+#define DENALI_PHY_646_DATA 0x01DDDD90
+#define DENALI_PHY_647_DATA 0x01DDDD90
+#define DENALI_PHY_648_DATA 0x01030001
+#define DENALI_PHY_649_DATA 0x01000000
+#define DENALI_PHY_650_DATA 0x00c00000
+#define DENALI_PHY_651_DATA 0x00000007
+#define DENALI_PHY_652_DATA 0x00000000
+#define DENALI_PHY_653_DATA 0x00000000
+#define DENALI_PHY_654_DATA 0x04000408
+#define DENALI_PHY_655_DATA 0x00000408
+#define DENALI_PHY_656_DATA 0x00e4e400
+#define DENALI_PHY_657_DATA 0x00000000
+#define DENALI_PHY_658_DATA 0x00000000
+#define DENALI_PHY_659_DATA 0x00000000
+#define DENALI_PHY_660_DATA 0x00000000
+#define DENALI_PHY_661_DATA 0x00000000
+#define DENALI_PHY_662_DATA 0x00000000
+#define DENALI_PHY_663_DATA 0x00000000
+#define DENALI_PHY_664_DATA 0x00000000
+#define DENALI_PHY_665_DATA 0x00000000
+#define DENALI_PHY_666_DATA 0x00000000
+#define DENALI_PHY_667_DATA 0x00000000
+#define DENALI_PHY_668_DATA 0x00000000
+#define DENALI_PHY_669_DATA 0x00000000
+#define DENALI_PHY_670_DATA 0x00000000
+#define DENALI_PHY_671_DATA 0x00000000
+#define DENALI_PHY_672_DATA 0x00000000
+#define DENALI_PHY_673_DATA 0x00200000
+#define DENALI_PHY_674_DATA 0x00000000
+#define DENALI_PHY_675_DATA 0x00000000
+#define DENALI_PHY_676_DATA 0x00000000
+#define DENALI_PHY_677_DATA 0x00000000
+#define DENALI_PHY_678_DATA 0x00000000
+#define DENALI_PHY_679_DATA 0x00000000
+#define DENALI_PHY_680_DATA 0x02800280
+#define DENALI_PHY_681_DATA 0x02800280
+#define DENALI_PHY_682_DATA 0x02800280
+#define DENALI_PHY_683_DATA 0x02800280
+#define DENALI_PHY_684_DATA 0x00000280
+#define DENALI_PHY_685_DATA 0x00000000
+#define DENALI_PHY_686_DATA 0x00000000
+#define DENALI_PHY_687_DATA 0x00000000
+#define DENALI_PHY_688_DATA 0x00000000
+#define DENALI_PHY_689_DATA 0x00000000
+#define DENALI_PHY_690_DATA 0x00800080
+#define DENALI_PHY_691_DATA 0x00800080
+#define DENALI_PHY_692_DATA 0x00800080
+#define DENALI_PHY_693_DATA 0x00800080
+#define DENALI_PHY_694_DATA 0x00800080
+#define DENALI_PHY_695_DATA 0x00800080
+#define DENALI_PHY_696_DATA 0x00800080
+#define DENALI_PHY_697_DATA 0x00800080
+#define DENALI_PHY_698_DATA 0x00800080
+#define DENALI_PHY_699_DATA 0x000100da
+#define DENALI_PHY_700_DATA 0x01ff0010
+#define DENALI_PHY_701_DATA 0x00000000
+#define DENALI_PHY_702_DATA 0x00000000
+#define DENALI_PHY_703_DATA 0x00000002
+#define DENALI_PHY_704_DATA 0x51313152
+#define DENALI_PHY_705_DATA 0x80013130
+#define DENALI_PHY_706_DATA 0x02000080
+#define DENALI_PHY_707_DATA 0x00100001
+#define DENALI_PHY_708_DATA 0x0c064208
+#define DENALI_PHY_709_DATA 0x000f0c0f
+#define DENALI_PHY_710_DATA 0x01000140
+#define DENALI_PHY_711_DATA 0x0000000c
+#define DENALI_PHY_712_DATA 0x00000000
+#define DENALI_PHY_713_DATA 0x00000000
+#define DENALI_PHY_714_DATA 0x00000000
+#define DENALI_PHY_715_DATA 0x00000000
+#define DENALI_PHY_716_DATA 0x00000000
+#define DENALI_PHY_717_DATA 0x00000000
+#define DENALI_PHY_718_DATA 0x00000000
+#define DENALI_PHY_719_DATA 0x00000000
+#define DENALI_PHY_720_DATA 0x00000000
+#define DENALI_PHY_721_DATA 0x00000000
+#define DENALI_PHY_722_DATA 0x00000000
+#define DENALI_PHY_723_DATA 0x00000000
+#define DENALI_PHY_724_DATA 0x00000000
+#define DENALI_PHY_725_DATA 0x00000000
+#define DENALI_PHY_726_DATA 0x00000000
+#define DENALI_PHY_727_DATA 0x00000000
+#define DENALI_PHY_728_DATA 0x00000000
+#define DENALI_PHY_729_DATA 0x00000000
+#define DENALI_PHY_730_DATA 0x00000000
+#define DENALI_PHY_731_DATA 0x00000000
+#define DENALI_PHY_732_DATA 0x00000000
+#define DENALI_PHY_733_DATA 0x00000000
+#define DENALI_PHY_734_DATA 0x00000000
+#define DENALI_PHY_735_DATA 0x00000000
+#define DENALI_PHY_736_DATA 0x00000000
+#define DENALI_PHY_737_DATA 0x00000000
+#define DENALI_PHY_738_DATA 0x00000000
+#define DENALI_PHY_739_DATA 0x00000000
+#define DENALI_PHY_740_DATA 0x00000000
+#define DENALI_PHY_741_DATA 0x00000000
+#define DENALI_PHY_742_DATA 0x00000000
+#define DENALI_PHY_743_DATA 0x00000000
+#define DENALI_PHY_744_DATA 0x00000000
+#define DENALI_PHY_745_DATA 0x00000000
+#define DENALI_PHY_746_DATA 0x00000000
+#define DENALI_PHY_747_DATA 0x00000000
+#define DENALI_PHY_748_DATA 0x00000000
+#define DENALI_PHY_749_DATA 0x00000000
+#define DENALI_PHY_750_DATA 0x00000000
+#define DENALI_PHY_751_DATA 0x00000000
+#define DENALI_PHY_752_DATA 0x00000000
+#define DENALI_PHY_753_DATA 0x00000000
+#define DENALI_PHY_754_DATA 0x00000000
+#define DENALI_PHY_755_DATA 0x00000000
+#define DENALI_PHY_756_DATA 0x00000000
+#define DENALI_PHY_757_DATA 0x00000000
+#define DENALI_PHY_758_DATA 0x00000000
+#define DENALI_PHY_759_DATA 0x00000000
+#define DENALI_PHY_760_DATA 0x00000000
+#define DENALI_PHY_761_DATA 0x00000000
+#define DENALI_PHY_762_DATA 0x00000000
+#define DENALI_PHY_763_DATA 0x00000000
+#define DENALI_PHY_764_DATA 0x00000000
+#define DENALI_PHY_765_DATA 0x00000000
+#define DENALI_PHY_766_DATA 0x00000000
+#define DENALI_PHY_767_DATA 0x00000000
+#define DENALI_PHY_768_DATA 0x10526347
+#define DENALI_PHY_769_DATA 0x0004c008
+#define DENALI_PHY_770_DATA 0x000000da
+#define DENALI_PHY_771_DATA 0x00000000
+#define DENALI_PHY_772_DATA 0x00000000
+#define DENALI_PHY_773_DATA 0x00010000
+#define DENALI_PHY_774_DATA 0x01DDDD90
+#define DENALI_PHY_775_DATA 0x01DDDD90
+#define DENALI_PHY_776_DATA 0x01030001
+#define DENALI_PHY_777_DATA 0x01000000
+#define DENALI_PHY_778_DATA 0x00c00000
+#define DENALI_PHY_779_DATA 0x00000007
+#define DENALI_PHY_780_DATA 0x00000000
+#define DENALI_PHY_781_DATA 0x00000000
+#define DENALI_PHY_782_DATA 0x04000408
+#define DENALI_PHY_783_DATA 0x00000408
+#define DENALI_PHY_784_DATA 0x00e4e400
+#define DENALI_PHY_785_DATA 0x00000000
+#define DENALI_PHY_786_DATA 0x00000000
+#define DENALI_PHY_787_DATA 0x00000000
+#define DENALI_PHY_788_DATA 0x00000000
+#define DENALI_PHY_789_DATA 0x00000000
+#define DENALI_PHY_790_DATA 0x00000000
+#define DENALI_PHY_791_DATA 0x00000000
+#define DENALI_PHY_792_DATA 0x00000000
+#define DENALI_PHY_793_DATA 0x00000000
+#define DENALI_PHY_794_DATA 0x00000000
+#define DENALI_PHY_795_DATA 0x00000000
+#define DENALI_PHY_796_DATA 0x00000000
+#define DENALI_PHY_797_DATA 0x00000000
+#define DENALI_PHY_798_DATA 0x00000000
+#define DENALI_PHY_799_DATA 0x00000000
+#define DENALI_PHY_800_DATA 0x00000000
+#define DENALI_PHY_801_DATA 0x00200000
+#define DENALI_PHY_802_DATA 0x00000000
+#define DENALI_PHY_803_DATA 0x00000000
+#define DENALI_PHY_804_DATA 0x00000000
+#define DENALI_PHY_805_DATA 0x00000000
+#define DENALI_PHY_806_DATA 0x00000000
+#define DENALI_PHY_807_DATA 0x00000000
+#define DENALI_PHY_808_DATA 0x02800280
+#define DENALI_PHY_809_DATA 0x02800280
+#define DENALI_PHY_810_DATA 0x02800280
+#define DENALI_PHY_811_DATA 0x02800280
+#define DENALI_PHY_812_DATA 0x00000280
+#define DENALI_PHY_813_DATA 0x00000000
+#define DENALI_PHY_814_DATA 0x00000000
+#define DENALI_PHY_815_DATA 0x00000000
+#define DENALI_PHY_816_DATA 0x00000000
+#define DENALI_PHY_817_DATA 0x00000000
+#define DENALI_PHY_818_DATA 0x00800080
+#define DENALI_PHY_819_DATA 0x00800080
+#define DENALI_PHY_820_DATA 0x00800080
+#define DENALI_PHY_821_DATA 0x00800080
+#define DENALI_PHY_822_DATA 0x00800080
+#define DENALI_PHY_823_DATA 0x00800080
+#define DENALI_PHY_824_DATA 0x00800080
+#define DENALI_PHY_825_DATA 0x00800080
+#define DENALI_PHY_826_DATA 0x00800080
+#define DENALI_PHY_827_DATA 0x000100da
+#define DENALI_PHY_828_DATA 0x01ff0010
+#define DENALI_PHY_829_DATA 0x00000000
+#define DENALI_PHY_830_DATA 0x00000000
+#define DENALI_PHY_831_DATA 0x00000002
+#define DENALI_PHY_832_DATA 0x51313152
+#define DENALI_PHY_833_DATA 0x80013130
+#define DENALI_PHY_834_DATA 0x02000080
+#define DENALI_PHY_835_DATA 0x00100001
+#define DENALI_PHY_836_DATA 0x0c064208
+#define DENALI_PHY_837_DATA 0x000f0c0f
+#define DENALI_PHY_838_DATA 0x01000140
+#define DENALI_PHY_839_DATA 0x0000000c
+#define DENALI_PHY_840_DATA 0x00000000
+#define DENALI_PHY_841_DATA 0x00000000
+#define DENALI_PHY_842_DATA 0x00000000
+#define DENALI_PHY_843_DATA 0x00000000
+#define DENALI_PHY_844_DATA 0x00000000
+#define DENALI_PHY_845_DATA 0x00000000
+#define DENALI_PHY_846_DATA 0x00000000
+#define DENALI_PHY_847_DATA 0x00000000
+#define DENALI_PHY_848_DATA 0x00000000
+#define DENALI_PHY_849_DATA 0x00000000
+#define DENALI_PHY_850_DATA 0x00000000
+#define DENALI_PHY_851_DATA 0x00000000
+#define DENALI_PHY_852_DATA 0x00000000
+#define DENALI_PHY_853_DATA 0x00000000
+#define DENALI_PHY_854_DATA 0x00000000
+#define DENALI_PHY_855_DATA 0x00000000
+#define DENALI_PHY_856_DATA 0x00000000
+#define DENALI_PHY_857_DATA 0x00000000
+#define DENALI_PHY_858_DATA 0x00000000
+#define DENALI_PHY_859_DATA 0x00000000
+#define DENALI_PHY_860_DATA 0x00000000
+#define DENALI_PHY_861_DATA 0x00000000
+#define DENALI_PHY_862_DATA 0x00000000
+#define DENALI_PHY_863_DATA 0x00000000
+#define DENALI_PHY_864_DATA 0x00000000
+#define DENALI_PHY_865_DATA 0x00000000
+#define DENALI_PHY_866_DATA 0x00000000
+#define DENALI_PHY_867_DATA 0x00000000
+#define DENALI_PHY_868_DATA 0x00000000
+#define DENALI_PHY_869_DATA 0x00000000
+#define DENALI_PHY_870_DATA 0x00000000
+#define DENALI_PHY_871_DATA 0x00000000
+#define DENALI_PHY_872_DATA 0x00000000
+#define DENALI_PHY_873_DATA 0x00000000
+#define DENALI_PHY_874_DATA 0x00000000
+#define DENALI_PHY_875_DATA 0x00000000
+#define DENALI_PHY_876_DATA 0x00000000
+#define DENALI_PHY_877_DATA 0x00000000
+#define DENALI_PHY_878_DATA 0x00000000
+#define DENALI_PHY_879_DATA 0x00000000
+#define DENALI_PHY_880_DATA 0x00000000
+#define DENALI_PHY_881_DATA 0x00000000
+#define DENALI_PHY_882_DATA 0x00000000
+#define DENALI_PHY_883_DATA 0x00000000
+#define DENALI_PHY_884_DATA 0x00000000
+#define DENALI_PHY_885_DATA 0x00000000
+#define DENALI_PHY_886_DATA 0x00000000
+#define DENALI_PHY_887_DATA 0x00000000
+#define DENALI_PHY_888_DATA 0x00000000
+#define DENALI_PHY_889_DATA 0x00000000
+#define DENALI_PHY_890_DATA 0x00000000
+#define DENALI_PHY_891_DATA 0x00000000
+#define DENALI_PHY_892_DATA 0x00000000
+#define DENALI_PHY_893_DATA 0x00000000
+#define DENALI_PHY_894_DATA 0x00000000
+#define DENALI_PHY_895_DATA 0x00000000
+#define DENALI_PHY_896_DATA 0x41753260
+#define DENALI_PHY_897_DATA 0x0004c008
+#define DENALI_PHY_898_DATA 0x000000da
+#define DENALI_PHY_899_DATA 0x00000000
+#define DENALI_PHY_900_DATA 0x00000000
+#define DENALI_PHY_901_DATA 0x00010000
+#define DENALI_PHY_902_DATA 0x01DDDD90
+#define DENALI_PHY_903_DATA 0x01DDDD90
+#define DENALI_PHY_904_DATA 0x01030001
+#define DENALI_PHY_905_DATA 0x01000000
+#define DENALI_PHY_906_DATA 0x00c00000
+#define DENALI_PHY_907_DATA 0x00000007
+#define DENALI_PHY_908_DATA 0x00000000
+#define DENALI_PHY_909_DATA 0x00000000
+#define DENALI_PHY_910_DATA 0x04000408
+#define DENALI_PHY_911_DATA 0x00000408
+#define DENALI_PHY_912_DATA 0x00e4e400
+#define DENALI_PHY_913_DATA 0x00000000
+#define DENALI_PHY_914_DATA 0x00000000
+#define DENALI_PHY_915_DATA 0x00000000
+#define DENALI_PHY_916_DATA 0x00000000
+#define DENALI_PHY_917_DATA 0x00000000
+#define DENALI_PHY_918_DATA 0x00000000
+#define DENALI_PHY_919_DATA 0x00000000
+#define DENALI_PHY_920_DATA 0x00000000
+#define DENALI_PHY_921_DATA 0x00000000
+#define DENALI_PHY_922_DATA 0x00000000
+#define DENALI_PHY_923_DATA 0x00000000
+#define DENALI_PHY_924_DATA 0x00000000
+#define DENALI_PHY_925_DATA 0x00000000
+#define DENALI_PHY_926_DATA 0x00000000
+#define DENALI_PHY_927_DATA 0x00000000
+#define DENALI_PHY_928_DATA 0x00000000
+#define DENALI_PHY_929_DATA 0x00200000
+#define DENALI_PHY_930_DATA 0x00000000
+#define DENALI_PHY_931_DATA 0x00000000
+#define DENALI_PHY_932_DATA 0x00000000
+#define DENALI_PHY_933_DATA 0x00000000
+#define DENALI_PHY_934_DATA 0x00000000
+#define DENALI_PHY_935_DATA 0x00000000
+#define DENALI_PHY_936_DATA 0x02800280
+#define DENALI_PHY_937_DATA 0x02800280
+#define DENALI_PHY_938_DATA 0x02800280
+#define DENALI_PHY_939_DATA 0x02800280
+#define DENALI_PHY_940_DATA 0x00000280
+#define DENALI_PHY_941_DATA 0x00000000
+#define DENALI_PHY_942_DATA 0x00000000
+#define DENALI_PHY_943_DATA 0x00000000
+#define DENALI_PHY_944_DATA 0x00000000
+#define DENALI_PHY_945_DATA 0x00000000
+#define DENALI_PHY_946_DATA 0x00800080
+#define DENALI_PHY_947_DATA 0x00800080
+#define DENALI_PHY_948_DATA 0x00800080
+#define DENALI_PHY_949_DATA 0x00800080
+#define DENALI_PHY_950_DATA 0x00800080
+#define DENALI_PHY_951_DATA 0x00800080
+#define DENALI_PHY_952_DATA 0x00800080
+#define DENALI_PHY_953_DATA 0x00800080
+#define DENALI_PHY_954_DATA 0x00800080
+#define DENALI_PHY_955_DATA 0x000100da
+#define DENALI_PHY_956_DATA 0x01ff0010
+#define DENALI_PHY_957_DATA 0x00000000
+#define DENALI_PHY_958_DATA 0x00000000
+#define DENALI_PHY_959_DATA 0x00000002
+#define DENALI_PHY_960_DATA 0x51313152
+#define DENALI_PHY_961_DATA 0x80013130
+#define DENALI_PHY_962_DATA 0x02000080
+#define DENALI_PHY_963_DATA 0x00100001
+#define DENALI_PHY_964_DATA 0x0c064208
+#define DENALI_PHY_965_DATA 0x000f0c0f
+#define DENALI_PHY_966_DATA 0x01000140
+#define DENALI_PHY_967_DATA 0x0000000c
+#define DENALI_PHY_968_DATA 0x00000000
+#define DENALI_PHY_969_DATA 0x00000000
+#define DENALI_PHY_970_DATA 0x00000000
+#define DENALI_PHY_971_DATA 0x00000000
+#define DENALI_PHY_972_DATA 0x00000000
+#define DENALI_PHY_973_DATA 0x00000000
+#define DENALI_PHY_974_DATA 0x00000000
+#define DENALI_PHY_975_DATA 0x00000000
+#define DENALI_PHY_976_DATA 0x00000000
+#define DENALI_PHY_977_DATA 0x00000000
+#define DENALI_PHY_978_DATA 0x00000000
+#define DENALI_PHY_979_DATA 0x00000000
+#define DENALI_PHY_980_DATA 0x00000000
+#define DENALI_PHY_981_DATA 0x00000000
+#define DENALI_PHY_982_DATA 0x00000000
+#define DENALI_PHY_983_DATA 0x00000000
+#define DENALI_PHY_984_DATA 0x00000000
+#define DENALI_PHY_985_DATA 0x00000000
+#define DENALI_PHY_986_DATA 0x00000000
+#define DENALI_PHY_987_DATA 0x00000000
+#define DENALI_PHY_988_DATA 0x00000000
+#define DENALI_PHY_989_DATA 0x00000000
+#define DENALI_PHY_990_DATA 0x00000000
+#define DENALI_PHY_991_DATA 0x00000000
+#define DENALI_PHY_992_DATA 0x00000000
+#define DENALI_PHY_993_DATA 0x00000000
+#define DENALI_PHY_994_DATA 0x00000000
+#define DENALI_PHY_995_DATA 0x00000000
+#define DENALI_PHY_996_DATA 0x00000000
+#define DENALI_PHY_997_DATA 0x00000000
+#define DENALI_PHY_998_DATA 0x00000000
+#define DENALI_PHY_999_DATA 0x00000000
+#define DENALI_PHY_1000_DATA 0x00000000
+#define DENALI_PHY_1001_DATA 0x00000000
+#define DENALI_PHY_1002_DATA 0x00000000
+#define DENALI_PHY_1003_DATA 0x00000000
+#define DENALI_PHY_1004_DATA 0x00000000
+#define DENALI_PHY_1005_DATA 0x00000000
+#define DENALI_PHY_1006_DATA 0x00000000
+#define DENALI_PHY_1007_DATA 0x00000000
+#define DENALI_PHY_1008_DATA 0x00000000
+#define DENALI_PHY_1009_DATA 0x00000000
+#define DENALI_PHY_1010_DATA 0x00000000
+#define DENALI_PHY_1011_DATA 0x00000000
+#define DENALI_PHY_1012_DATA 0x00000000
+#define DENALI_PHY_1013_DATA 0x00000000
+#define DENALI_PHY_1014_DATA 0x00000000
+#define DENALI_PHY_1015_DATA 0x00000000
+#define DENALI_PHY_1016_DATA 0x00000000
+#define DENALI_PHY_1017_DATA 0x00000000
+#define DENALI_PHY_1018_DATA 0x00000000
+#define DENALI_PHY_1019_DATA 0x00000000
+#define DENALI_PHY_1020_DATA 0x00000000
+#define DENALI_PHY_1021_DATA 0x00000000
+#define DENALI_PHY_1022_DATA 0x00000000
+#define DENALI_PHY_1023_DATA 0x00000000
+#define DENALI_PHY_1024_DATA 0x76543210
+#define DENALI_PHY_1025_DATA 0x0004c008
+#define DENALI_PHY_1026_DATA 0x000000da
+#define DENALI_PHY_1027_DATA 0x00000000
+#define DENALI_PHY_1028_DATA 0x00000000
+#define DENALI_PHY_1029_DATA 0x00010000
+#define DENALI_PHY_1030_DATA 0x01665555
+#define DENALI_PHY_1031_DATA 0x01665555
+#define DENALI_PHY_1032_DATA 0x01030001
+#define DENALI_PHY_1033_DATA 0x01000000
+#define DENALI_PHY_1034_DATA 0x00c00000
+#define DENALI_PHY_1035_DATA 0x00000007
+#define DENALI_PHY_1036_DATA 0x00000000
+#define DENALI_PHY_1037_DATA 0x00000000
+#define DENALI_PHY_1038_DATA 0x04000408
+#define DENALI_PHY_1039_DATA 0x00000408
+#define DENALI_PHY_1040_DATA 0x00e4e400
+#define DENALI_PHY_1041_DATA 0x00000000
+#define DENALI_PHY_1042_DATA 0x00000000
+#define DENALI_PHY_1043_DATA 0x00000000
+#define DENALI_PHY_1044_DATA 0x00000000
+#define DENALI_PHY_1045_DATA 0x00000000
+#define DENALI_PHY_1046_DATA 0x00000000
+#define DENALI_PHY_1047_DATA 0x00000000
+#define DENALI_PHY_1048_DATA 0x00000000
+#define DENALI_PHY_1049_DATA 0x00000000
+#define DENALI_PHY_1050_DATA 0x00000000
+#define DENALI_PHY_1051_DATA 0x00000000
+#define DENALI_PHY_1052_DATA 0x00000000
+#define DENALI_PHY_1053_DATA 0x00000000
+#define DENALI_PHY_1054_DATA 0x00000000
+#define DENALI_PHY_1055_DATA 0x00000000
+#define DENALI_PHY_1056_DATA 0x00000000
+#define DENALI_PHY_1057_DATA 0x00200000
+#define DENALI_PHY_1058_DATA 0x00000000
+#define DENALI_PHY_1059_DATA 0x00000000
+#define DENALI_PHY_1060_DATA 0x00000000
+#define DENALI_PHY_1061_DATA 0x00000000
+#define DENALI_PHY_1062_DATA 0x00000000
+#define DENALI_PHY_1063_DATA 0x00000000
+#define DENALI_PHY_1064_DATA 0x02800280
+#define DENALI_PHY_1065_DATA 0x02800280
+#define DENALI_PHY_1066_DATA 0x02800280
+#define DENALI_PHY_1067_DATA 0x02800280
+#define DENALI_PHY_1068_DATA 0x00000280
+#define DENALI_PHY_1069_DATA 0x00000000
+#define DENALI_PHY_1070_DATA 0x00000000
+#define DENALI_PHY_1071_DATA 0x00000000
+#define DENALI_PHY_1072_DATA 0x00000000
+#define DENALI_PHY_1073_DATA 0x00000000
+#define DENALI_PHY_1074_DATA 0x00800080
+#define DENALI_PHY_1075_DATA 0x00800080
+#define DENALI_PHY_1076_DATA 0x00800080
+#define DENALI_PHY_1077_DATA 0x00800080
+#define DENALI_PHY_1078_DATA 0x00800080
+#define DENALI_PHY_1079_DATA 0x00800080
+#define DENALI_PHY_1080_DATA 0x00800080
+#define DENALI_PHY_1081_DATA 0x00800080
+#define DENALI_PHY_1082_DATA 0x00800080
+#define DENALI_PHY_1083_DATA 0x000100da
+#define DENALI_PHY_1084_DATA 0x01ff0010
+#define DENALI_PHY_1085_DATA 0x00000000
+#define DENALI_PHY_1086_DATA 0x00000000
+#define DENALI_PHY_1087_DATA 0x00000002
+#define DENALI_PHY_1088_DATA 0x51313152
+#define DENALI_PHY_1089_DATA 0x80013130
+#define DENALI_PHY_1090_DATA 0x02000080
+#define DENALI_PHY_1091_DATA 0x00100001
+#define DENALI_PHY_1092_DATA 0x0c064208
+#define DENALI_PHY_1093_DATA 0x000f0c0f
+#define DENALI_PHY_1094_DATA 0x01000140
+#define DENALI_PHY_1095_DATA 0x0000000c
+#define DENALI_PHY_1096_DATA 0x00000000
+#define DENALI_PHY_1097_DATA 0x00000000
+#define DENALI_PHY_1098_DATA 0x00000000
+#define DENALI_PHY_1099_DATA 0x00000000
+#define DENALI_PHY_1100_DATA 0x00000000
+#define DENALI_PHY_1101_DATA 0x00000000
+#define DENALI_PHY_1102_DATA 0x00000000
+#define DENALI_PHY_1103_DATA 0x00000000
+#define DENALI_PHY_1104_DATA 0x00000000
+#define DENALI_PHY_1105_DATA 0x00000000
+#define DENALI_PHY_1106_DATA 0x00000000
+#define DENALI_PHY_1107_DATA 0x00000000
+#define DENALI_PHY_1108_DATA 0x00000000
+#define DENALI_PHY_1109_DATA 0x00000000
+#define DENALI_PHY_1110_DATA 0x00000000
+#define DENALI_PHY_1111_DATA 0x00000000
+#define DENALI_PHY_1112_DATA 0x00000000
+#define DENALI_PHY_1113_DATA 0x00000000
+#define DENALI_PHY_1114_DATA 0x00000000
+#define DENALI_PHY_1115_DATA 0x00000000
+#define DENALI_PHY_1116_DATA 0x00000000
+#define DENALI_PHY_1117_DATA 0x00000000
+#define DENALI_PHY_1118_DATA 0x00000000
+#define DENALI_PHY_1119_DATA 0x00000000
+#define DENALI_PHY_1120_DATA 0x00000000
+#define DENALI_PHY_1121_DATA 0x00000000
+#define DENALI_PHY_1122_DATA 0x00000000
+#define DENALI_PHY_1123_DATA 0x00000000
+#define DENALI_PHY_1124_DATA 0x00000000
+#define DENALI_PHY_1125_DATA 0x00000000
+#define DENALI_PHY_1126_DATA 0x00000000
+#define DENALI_PHY_1127_DATA 0x00000000
+#define DENALI_PHY_1128_DATA 0x00000000
+#define DENALI_PHY_1129_DATA 0x00000000
+#define DENALI_PHY_1130_DATA 0x00000000
+#define DENALI_PHY_1131_DATA 0x00000000
+#define DENALI_PHY_1132_DATA 0x00000000
+#define DENALI_PHY_1133_DATA 0x00000000
+#define DENALI_PHY_1134_DATA 0x00000000
+#define DENALI_PHY_1135_DATA 0x00000000
+#define DENALI_PHY_1136_DATA 0x00000000
+#define DENALI_PHY_1137_DATA 0x00000000
+#define DENALI_PHY_1138_DATA 0x00000000
+#define DENALI_PHY_1139_DATA 0x00000000
+#define DENALI_PHY_1140_DATA 0x00000000
+#define DENALI_PHY_1141_DATA 0x00000000
+#define DENALI_PHY_1142_DATA 0x00000000
+#define DENALI_PHY_1143_DATA 0x00000000
+#define DENALI_PHY_1144_DATA 0x00000000
+#define DENALI_PHY_1145_DATA 0x00000000
+#define DENALI_PHY_1146_DATA 0x00000000
+#define DENALI_PHY_1147_DATA 0x00000000
+#define DENALI_PHY_1148_DATA 0x00000000
+#define DENALI_PHY_1149_DATA 0x00000000
+#define DENALI_PHY_1150_DATA 0x00000000
+#define DENALI_PHY_1151_DATA 0x00000000
+#define DENALI_PHY_1152_DATA 0x00000000
+#define DENALI_PHY_1153_DATA 0x00000000
+#define DENALI_PHY_1154_DATA 0x00050000
+#define DENALI_PHY_1155_DATA 0x00000000
+#define DENALI_PHY_1156_DATA 0x00000000
+#define DENALI_PHY_1157_DATA 0x00000000
+#define DENALI_PHY_1158_DATA 0x00000100
+#define DENALI_PHY_1159_DATA 0x00000000
+#define DENALI_PHY_1160_DATA 0x00000000
+#define DENALI_PHY_1161_DATA 0x00506401
+#define DENALI_PHY_1162_DATA 0x01221102
+#define DENALI_PHY_1163_DATA 0x00000122
+#define DENALI_PHY_1164_DATA 0x00000000
+#define DENALI_PHY_1165_DATA 0x000B1F00
+#define DENALI_PHY_1166_DATA 0x0B1F0B1F
+#define DENALI_PHY_1167_DATA 0x0B1F0B1F
+#define DENALI_PHY_1168_DATA 0x0B1F0B1F
+#define DENALI_PHY_1169_DATA 0x0B1F0B1F
+#define DENALI_PHY_1170_DATA 0x00000B00
+#define DENALI_PHY_1171_DATA 0x42080010
+#define DENALI_PHY_1172_DATA 0x01000100
+#define DENALI_PHY_1173_DATA 0x01000100
+#define DENALI_PHY_1174_DATA 0x01000100
+#define DENALI_PHY_1175_DATA 0x01000100
+#define DENALI_PHY_1176_DATA 0x00000000
+#define DENALI_PHY_1177_DATA 0x00000000
+#define DENALI_PHY_1178_DATA 0x00000000
+#define DENALI_PHY_1179_DATA 0x00000000
+#define DENALI_PHY_1180_DATA 0x00000000
+#define DENALI_PHY_1181_DATA 0x00000803
+#define DENALI_PHY_1182_DATA 0x223FFF00
+#define DENALI_PHY_1183_DATA 0x000008FF
+#define DENALI_PHY_1184_DATA 0x0000057F
+#define DENALI_PHY_1185_DATA 0x0000057F
+#define DENALI_PHY_1186_DATA 0x00037FFF
+#define DENALI_PHY_1187_DATA 0x00037FFF
+#define DENALI_PHY_1188_DATA 0x00004410
+#define DENALI_PHY_1189_DATA 0x00004410
+#define DENALI_PHY_1190_DATA 0x00004410
+#define DENALI_PHY_1191_DATA 0x00004410
+#define DENALI_PHY_1192_DATA 0x00004410
+#define DENALI_PHY_1193_DATA 0x00000111
+#define DENALI_PHY_1194_DATA 0x00000111
+#define DENALI_PHY_1195_DATA 0x00000000
+#define DENALI_PHY_1196_DATA 0x00000000
+#define DENALI_PHY_1197_DATA 0x00000000
+#define DENALI_PHY_1198_DATA 0x04000000
+#define DENALI_PHY_1199_DATA 0x00000000
+#define DENALI_PHY_1200_DATA 0x00000000
+#define DENALI_PHY_1201_DATA 0x00000108
+#define DENALI_PHY_1202_DATA 0x00000000
+#define DENALI_PHY_1203_DATA 0x00000000
+#define DENALI_PHY_1204_DATA 0x00000000
+#define DENALI_PHY_1205_DATA 0x00000001
+#define DENALI_PHY_1206_DATA 0x00000000
+#define DENALI_PHY_1207_DATA 0x00000000
+#define DENALI_PHY_1208_DATA 0x00000000
+#define DENALI_PHY_1209_DATA 0x00000000
+#define DENALI_PHY_1210_DATA 0x00000000
+#define DENALI_PHY_1211_DATA 0x00000000
+#define DENALI_PHY_1212_DATA 0x00020100
+#define DENALI_PHY_1213_DATA 0x00000000
+#define DENALI_PHY_1214_DATA 0x00000000
diff --git a/src/soc/sifive/fu740/sdram.c b/src/soc/sifive/fu740/sdram.c
new file mode 100644
index 0000000..8b5415c
--- /dev/null
+++ b/src/soc/sifive/fu740/sdram.c
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <soc/sdram.h>
+#include <soc/addressmap.h>
+#include <soc/ux00ddr.h>
+
+//TODO put this in common code
+
+extern const uint32_t denali_ddr_phy_data[1215];
+extern const uint32_t denali_ddr_ctl_data[265];
+
+//TODO move to mainboard code
+#define DDR_SIZE (16UL * 1024UL * 1024UL * 1024UL)
+
+#define FU740_PHYSICAL_FILTER 0x100b8000 // formerly called DDRBUSBLOCKER (fu540)
+
+void sdram_init(void)
+{
+ ux00ddr_writeregmap(FU740_DDRCTRL, denali_ddr_ctl_data, denali_ddr_phy_data);
+ ux00ddr_disableaxireadinterleave(FU740_DDRCTRL);
+
+ ux00ddr_disableoptimalrmodw(FU740_DDRCTRL);
+
+ ux00ddr_enablewriteleveling(FU740_DDRCTRL);
+ ux00ddr_enablereadleveling(FU740_DDRCTRL);
+ ux00ddr_enablereadlevelinggate(FU740_DDRCTRL);
+ if (ux00ddr_getdramclass(FU740_DDRCTRL) == DRAM_CLASS_DDR4)
+ ux00ddr_enablevreftraining(FU740_DDRCTRL);
+
+ //mask off interrupts for leveling completion
+ ux00ddr_mask_leveling_completed_interrupt(FU740_DDRCTRL);
+
+ ux00ddr_mask_mc_init_complete_interrupt(FU740_DDRCTRL);
+ ux00ddr_mask_outofrange_interrupts(FU740_DDRCTRL);
+ ux00ddr_setuprangeprotection(FU740_DDRCTRL, DDR_SIZE);
+ ux00ddr_mask_port_command_error_interrupt(FU740_DDRCTRL);
+
+ const uint64_t ddr_size = DDR_SIZE;
+ const uint64_t ddr_end = FU740_DRAM + ddr_size;
+ ux00ddr_start(FU740_DDRCTRL, FU740_PHYSICAL_FILTER, ddr_end);
+
+ ux00ddr_phy_fixup(FU740_DDRCTRL);
+}
+
+size_t sdram_size(void)
+{
+ //TODO take it from physical filter register
+ return (uint64_t)16 * 1024 * 1024 * 1024;
+}
diff --git a/src/soc/sifive/fu740/spi.c b/src/soc/sifive/fu740/spi.c
new file mode 100644
index 0000000..4f8c592
--- /dev/null
+++ b/src/soc/sifive/fu740/spi.c
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <device/mmio.h>
+#include <soc/spi.h>
+#include <soc/clock.h>
+#include <soc/addressmap.h>
+#include <delay.h>
+#include <lib.h>
+
+#include "spi_internal.h"
+
+static struct fu740_spi_ctrl *fu740_spi_ctrls[] = {
+ (struct fu740_spi_ctrl *)FU740_QSPI0,
+ (struct fu740_spi_ctrl *)FU740_QSPI1,
+ (struct fu740_spi_ctrl *)FU740_QSPI2
+};
+
+// Wait until SPI is ready for transmission and transmit byte.
+static void fu740_spi_tx(volatile struct fu740_spi_ctrl *spictrl_reg, uint8_t in)
+{
+#if __riscv_atomic
+ int32_t r;
+ do {
+ asm volatile (
+ "amoor.w %0, %2, %1\n"
+ : "=r" (r), "+A" (spictrl_reg->txdata.raw_bits)
+ : "r" (in)
+ );
+ } while (r < 0);
+#else
+ while ((int32_t) spictrl_reg->txdata.raw_bits < 0)
+ ;
+ spictrl_reg->txdata.data = in;
+#endif
+}
+
+// Wait until SPI receive queue has data and read byte.
+static uint8_t fu740_spi_rx(volatile struct fu740_spi_ctrl *spictrl_reg)
+{
+ int32_t out;
+ while ((out = (int32_t) spictrl_reg->rxdata.raw_bits) < 0)
+ ;
+ return (uint8_t) out;
+}
+
+static int fu740_spi_xfer(const struct spi_slave *slave,
+ const void *dout, size_t bytesout,
+ void *din, size_t bytesin)
+{
+ printk(BIOS_DEBUG, "%s 0, bytesin: %zu, bytesout: %zu, din: %p\n", __func__, bytesin, bytesout, din);
+ hexdump(dout, bytesout);
+ int s = bytesin;
+ void *d = din;
+ struct fu740_spi_ctrl *spictrl_reg = fu740_spi_ctrls[slave->bus];
+ union fu740_spi_reg_fmt fmt;
+ fmt.raw_bits = read32(&spictrl_reg->fmt.raw_bits);
+ if (fmt.proto == FU740_SPI_PROTO_S) {
+ // working in full-duplex mode
+ // receiving data needs to be triggered by sending data
+ while (bytesout || bytesin) {
+ uint8_t in, out = 0;
+ if (bytesout) {
+ out = *(uint8_t *)dout++;
+ bytesout--;
+ }
+ fu740_spi_tx(spictrl_reg, out);
+ in = fu740_spi_rx(spictrl_reg);
+ if (bytesin) {
+ *(uint8_t *)din++ = in;
+ bytesin--;
+ }
+ }
+ hexdump(d, (s > 100) ? 100 : s);
+ } else {
+ // Working in half duplex
+ // send and receive can be done separately
+ if (dout && din)
+ return -1;
+
+ if (dout) {
+ while (bytesout) {
+ fu740_spi_tx(spictrl_reg, *(uint8_t *)dout++);
+ bytesout--;
+ }
+ }
+
+ if (din) {
+ while (bytesin) {
+ *(uint8_t *)din++ = fu740_spi_rx(spictrl_reg);
+ bytesin--;
+ }
+ }
+ }
+ return 0;
+}
+
+static int fu740_spi_claim_bus(const struct spi_slave *slave)
+{
+ struct fu740_spi_ctrl *spictrl = fu740_spi_ctrls[slave->bus];
+ union fu740_spi_reg_csmode csmode;
+ csmode.raw_bits = 0;
+ csmode.mode = FU740_SPI_CSMODE_HOLD;
+ write32(&spictrl->csmode.raw_bits, csmode.raw_bits);
+ return 0;
+}
+
+static void fu740_spi_release_bus(const struct spi_slave *slave)
+{
+ struct fu740_spi_ctrl *spictrl = fu740_spi_ctrls[slave->bus];
+ union fu740_spi_reg_csmode csmode;
+ csmode.raw_bits = 0;
+ csmode.mode = FU740_SPI_CSMODE_OFF;
+ write32(&spictrl->csmode.raw_bits, csmode.raw_bits);
+}
+
+// reset spi flash chip
+static void fu740_spi_reset(volatile struct fu740_spi_ctrl *spictrl_reg) {
+ fu740_spi_tx(spictrl_reg, 0x66);
+ fu740_spi_tx(spictrl_reg, 0x99);
+}
+
+// setup the ffmt (SPI flash instruction format) register
+__maybe_unused static int fu740_spi_setup_ffmt(volatile struct fu740_spi_ctrl *spictrl_reg,
+ const struct fu740_spi_config *config)
+{
+ //union fu740_spi_reg_fctrl fctrl;
+ union fu740_spi_reg_ffmt ffmt;
+
+ printk(BIOS_DEBUG, "config->data_proto: %d, config->cmd_code: %d\n",
+ config->ffmt_config.data_proto,
+ config->ffmt_config.cmd_code);
+
+ //TODO test without this here
+ fu740_spi_reset(spictrl_reg);
+
+ ffmt.raw_bits = 0;
+ ffmt.cmd_en = 1; // enable sending of command
+ ffmt.addr_len = 3; // number of address bytes (0-4)
+ ffmt.pad_cnt = 0; // number of dummy cycles TODO maybe not working
+ ffmt.cmd_proto = FU740_SPI_PROTO_S; // protocol for transmitting command
+ ffmt.addr_proto = FU740_SPI_PROTO_S; // protocol for transmitting address and padding
+ ffmt.data_proto = config->ffmt_config.data_proto; // protocol for receiving data bytes
+ ffmt.cmd_code = config->ffmt_config.cmd_code; // value of command byte
+ ffmt.pad_code = 0; // First 8 bits to transmit during dummy cycles
+ write32(&spictrl_reg->ffmt.raw_bits, ffmt.raw_bits);
+
+ // enable direct memory-mapped spi flash mode
+ //TODO put this in the mainboard code
+ //fctrl.raw_bits = 0;
+ //fctrl.en = 1;
+ //write32(&spictrl_reg->fctrl.raw_bits, fctrl.raw_bits);
+
+ return 0;
+}
+
+int fu740_spi_setup(const struct spi_slave *slave) { //, struct fu740_spi_ctrl *spictrl_reg, struct fu740_spi_config *config) {
+
+ //union fu740_spi_reg_sckmode sckmode;
+ union fu740_spi_reg_csmode csmode;
+ //union fu740_spi_reg_fmt fmt;
+ union fu740_spi_reg_fctrl fctrl;
+
+ struct fu740_spi_ctrl *spictrl_reg = fu740_spi_ctrls[slave->bus];
+ struct fu740_spi_config *config = &fu740_spi_configs[slave->bus];
+
+ if ((config->pha > 1)
+ || (config->pol > 1)
+ || (config->fmt_config.protocol > 2)
+ || (config->fmt_config.endianness > 1)
+ || (config->fmt_config.bits_per_frame > 8))
+ return -1;
+
+ write32(&spictrl_reg->sckdiv, fu740_spi_min_clk_divisor(clock_get_pclk(), config->freq));
+
+ /* disable direct memory-mapped spi flash mode */
+ //TODO test if we need to disable it before changing the settings
+ fctrl.raw_bits = 0;
+ fctrl.en = 0;
+ write32(&spictrl_reg->fctrl.raw_bits, fctrl.raw_bits);
+
+ //sckmode.raw_bits = 0;
+ //sckmode.pha = 0;
+ //sckmode.pol = 0;
+ //write32(&spictrl_reg->sckmode.raw_bits, sckmode.raw_bits);
+
+ //write32(&spictrl_reg->csdef, 0xffffffff);
+
+ //csmode.raw_bits = 0;
+ //csmode.mode = FU740_SPI_CSMODE_AUTO;
+ //write32(&spictrl_reg->csmode.raw_bits, csmode.raw_bits);
+
+ //fmt.raw_bits = 0;
+ //fmt.proto = 0;
+ //fmt.endian = 0;
+ //fmt.dir = 1;
+ //fmt.len = 8;
+ //write32(&spictrl_reg->fmt.raw_bits, fmt.raw_bits);
+
+ //fu740_spi_setup_ffmt(spictrl_reg, config);
+
+ csmode.raw_bits = 0;
+ csmode.mode = FU740_SPI_CSMODE_HOLD;
+ write32(&spictrl_reg->csmode.raw_bits, csmode.raw_bits);
+ char din[10];
+ char dout[10] = { 0x66 };
+ printk(BIOS_DEBUG, "%s 0\n", __func__);
+ slave->ctrlr->xfer(slave, dout, 1, din, 0);
+ printk(BIOS_DEBUG, "%s 1\n", __func__);
+ dout[0] = 0x99;
+ slave->ctrlr->xfer(slave, dout, 1, din, 0);
+ printk(BIOS_DEBUG, "%s 2\n", __func__);
+ int addr = 0x200;
+ dout[0] = 0x03;
+ dout[1] = (addr >> 16) & 0xFF;
+ dout[2] = (addr >> 8) & 0xFF;
+ dout[3] = addr & 0xFF;
+ slave->ctrlr->xfer(slave, dout, 4, din, 10);
+ printk(BIOS_DEBUG, "%s 3\n", __func__);
+ csmode.mode = FU740_SPI_CSMODE_AUTO;
+ write32(&spictrl_reg->csmode.raw_bits, csmode.raw_bits);
+ din[9] = 0;
+ printk(BIOS_DEBUG, "%s 4\n", __func__);
+ hexdump(din, 10);
+ return 0;
+}
+
+struct spi_ctrlr fu740_spi_ctrlr = {
+ .xfer = fu740_spi_xfer,
+ .setup = fu740_spi_setup,
+ .claim_bus = fu740_spi_claim_bus,
+ .release_bus = fu740_spi_release_bus,
+ .max_xfer_size = SPI_CTRLR_DEFAULT_MAX_XFER_SIZE, //TODO
+};
+
+const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
+ {
+ .bus_start = 0,
+ .bus_end = 2,
+ .ctrlr = &fu740_spi_ctrlr,
+ }
+};
+
+const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
+
diff --git a/src/soc/sifive/fu740/spi_internal.h b/src/soc/sifive/fu740/spi_internal.h
new file mode 100644
index 0000000..4cc2861
--- /dev/null
+++ b/src/soc/sifive/fu740/spi_internal.h
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __SOC_SIFIVE_HIFIVE_U_SPI_INTERNAL_H__
+#define __SOC_SIFIVE_HIFIVE_U_SPI_INTERNAL_H__
+
+#include <stdint.h>
+
+#define _ASSERT_SIZEOF(type, size) _Static_assert( \
+ sizeof(type) == (size), \
+ #type " must be " #size " bytes wide")
+
+// Chip Select Mode Register (csmode)
+
+#define FU740_SPI_CSMODE_AUTO 0
+#define FU740_SPI_CSMODE_HOLD 2
+#define FU740_SPI_CSMODE_OFF 3
+
+union fu740_spi_reg_sckmode {
+ struct {
+ uint32_t pha : 1;
+ uint32_t pol : 1;
+ uint32_t reserved : 30;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_sckmode, 4);
+
+union fu740_spi_reg_csmode {
+ struct {
+ uint32_t mode : 2;
+ uint32_t reserved : 30;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_csmode, 4);
+
+union fu740_spi_reg_delay0 {
+ struct {
+ uint32_t cssck : 8;
+ uint32_t reserved0 : 8;
+ uint32_t sckcs : 8;
+ uint32_t reserved1 : 8;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_delay0, 4);
+
+union fu740_spi_reg_delay1 {
+ struct {
+ uint32_t intercs : 8;
+ uint32_t reserved0 : 8;
+ uint32_t interxfr : 8;
+ uint32_t reserved1 : 8;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_delay1, 4);
+
+union fu740_spi_reg_fmt {
+ struct {
+ uint32_t proto : 2;
+ uint32_t endian : 1;
+ uint32_t dir : 1;
+ uint32_t reserved0 : 12;
+ uint32_t len : 4;
+ uint32_t reserved1 : 12;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_fmt, 4);
+
+union fu740_spi_reg_txdata {
+ struct {
+ uint32_t data : 8;
+ uint32_t reserved : 23;
+ uint32_t full : 1;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_txdata, 4);
+
+union fu740_spi_reg_rxdata {
+ struct {
+ uint32_t data : 8;
+ uint32_t reserved : 23;
+ uint32_t empty : 1;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_rxdata, 4);
+
+union fu740_spi_reg_txmark {
+ struct {
+ uint32_t txmark : 3;
+ uint32_t reserved : 29;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_txmark, 4);
+
+union fu740_spi_reg_rxmark {
+ struct {
+ uint32_t rxmark : 3;
+ uint32_t reserved : 29;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_rxmark, 4);
+
+union fu740_spi_reg_fctrl {
+ struct {
+ uint32_t en : 1;
+ uint32_t reserved : 31;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_fctrl, 4);
+
+union fu740_spi_reg_ffmt {
+ struct {
+ uint32_t cmd_en : 1;
+ uint32_t addr_len : 3;
+ uint32_t pad_cnt : 4;
+ uint32_t cmd_proto : 2;
+ uint32_t addr_proto : 2;
+ uint32_t data_proto : 2;
+ uint32_t reserved : 2;
+ uint32_t cmd_code : 8;
+ uint32_t pad_code : 8;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_ffmt, 4);
+
+union fu740_spi_reg_ie {
+ struct {
+ uint32_t txwm : 1;
+ uint32_t rxwm : 1;
+ uint32_t reserved : 30;
+ };
+ uint32_t raw_bits;
+};
+
+union fu740_spi_reg_ip {
+ struct {
+ uint32_t txwm : 1;
+ uint32_t rxwm : 1;
+ uint32_t reserved : 30;
+ };
+ uint32_t raw_bits;
+};
+_ASSERT_SIZEOF(union fu740_spi_reg_ie, 4);
+_ASSERT_SIZEOF(union fu740_spi_reg_ip, 4);
+
+#undef _ASSERT_SIZEOF
+
+/**
+ * SPI control register memory map.
+ *
+ * All functions take a pointer to a SPI device's control registers.
+ */
+struct fu740_spi_ctrl {
+ uint32_t sckdiv;
+ union fu740_spi_reg_sckmode sckmode;
+ uint32_t reserved08;
+ uint32_t reserved0c;
+
+ uint32_t csid;
+ uint32_t csdef;
+ union fu740_spi_reg_csmode csmode;
+ uint32_t reserved1c;
+
+ uint32_t reserved20;
+ uint32_t reserved24;
+ union fu740_spi_reg_delay0 delay0;
+ union fu740_spi_reg_delay1 delay1;
+
+ uint32_t reserved30;
+ uint32_t reserved34;
+ uint32_t reserved38;
+ uint32_t reserved3c;
+
+ union fu740_spi_reg_fmt fmt;
+ uint32_t reserved44;
+ union fu740_spi_reg_txdata txdata;
+ union fu740_spi_reg_rxdata rxdata;
+
+ union fu740_spi_reg_txmark txmark;
+ union fu740_spi_reg_rxmark rxmark;
+ uint32_t reserved58;
+ uint32_t reserved5c;
+
+ union fu740_spi_reg_fctrl fctrl;
+ union fu740_spi_reg_ffmt ffmt;
+ uint32_t reserved68;
+ uint32_t reserved6c;
+
+ union fu740_spi_reg_ie ie;
+ union fu740_spi_reg_ip ip;
+};
+
+/**
+ * Get smallest clock divisor that divides input_khz to a quotient less than or
+ * equal to max_target_khz;
+ */
+static inline unsigned int
+fu740_spi_min_clk_divisor(unsigned int input_khz, unsigned int max_target_khz)
+{
+ // f_sck = f_in / (2 * (div + 1)) => div = (f_in / (2*f_sck)) - 1
+ //
+ // The nearest integer solution for div requires rounding up as to not
+ // exceed max_target_khz.
+ //
+ // div = ceil(f_in / (2*f_sck)) - 1
+ // = floor((f_in - 1 + 2*f_sck) / (2*f_sck)) - 1
+ //
+ // This should not overflow as long as (f_in - 1 + 2*f_sck) does not
+ // exceed 2^32 - 1, which is unlikely since we represent frequencies
+ // in kHz.
+ unsigned int quotient =
+ (input_khz + 2 * max_target_khz - 1) / (2 * max_target_khz);
+ // Avoid underflow
+ if (quotient == 0)
+ return 0;
+ return quotient - 1;
+}
+
+#endif /* __SOC_SIFIVE_HIFIVE_U_SPI_INTERNAL_H__ */
diff --git a/src/soc/sifive/fu740/uart.c b/src/soc/sifive/fu740/uart.c
new file mode 100644
index 0000000..94a6d2d
--- /dev/null
+++ b/src/soc/sifive/fu740/uart.c
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <stdint.h>
+#include <console/uart.h>
+#include <commonlib/bsd/helpers.h>
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+
+uintptr_t uart_platform_base(unsigned int idx)
+{
+ if (idx < 2)
+ return FU740_UART(idx);
+ else
+ return 0;
+}
+
+unsigned int uart_platform_refclk(void)
+{
+ // peripheral clock is attached to UART subsystem
+ return clock_get_pclk();
+}
To view, visit change 79953. To unsubscribe, or for help writing mail filters, visit settings.