Attention is currently required from: Furquan Shaikh, Evan Green, Tim Wawrzynczak.

View Change

1 comment:

• Commit Message:

  • Patch Set #3, Line 9: LTE module is not expected to be powered off during warm reset

    Does the kernel load FW for the module? The enable & reset GPIOs are passed to the kernel, so it cou […]

    There is no mention of Firmware reload after a warm reset in the LTE module hardware guide.

    On the other hand, LTE module hardware guide recommends using this reset sequence when updating the LTE firmware. The reference hardware guide is attached in the bug.

To view, visit change 48623. To unsubscribe, or for help writing mail filters, visit settings.