Felix Singer has uploaded this change for review.
vc/intel/fsp2/denverton: Remove unused files
The Denverton SoC uses the header files from the git repository.
Therefore, remove these from coreboot source.
Change-Id: Ib22d3f5e5ce83eb83bf589ea8bba7b55ebe44ea8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
---
M MAINTAINERS
D src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
D src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
D src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
D src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
5 files changed, 0 insertions(+), 1,157 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/54/47754/1
diff --git a/MAINTAINERS b/MAINTAINERS
index 1f4df52..6a1f500 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -511,7 +511,6 @@
S: Odd Fixes
F: src/mainboard/intel/harcuvar/
F: src/soc/intel/denverton_ns/
-F: src/vendorcode/intel/fsp/fsp2_0/denverton_ns/
INTEL FSP 1.1
M: Lee Leahy <leroy.p.leahy@intel.com>
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
deleted file mode 100644
index 1aa46a0..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspUpd.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/** @file
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPUPD_H__
-#define __FSPUPD_H__
-
-#include <FspEas.h>
-
-#pragma pack(1)
-
-#define FSPT_UPD_SIGNATURE 0x545F445055564E44 /* 'DNVUPD_T' */
-
-#define FSPM_UPD_SIGNATURE 0x4D5F445055564E44 /* 'DNVUPD_M' */
-
-#define FSPS_UPD_SIGNATURE 0x535F445055564E44 /* 'DNVUPD_S' */
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
deleted file mode 100644
index 3aa74a0f..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspmUpd.h
+++ /dev/null
@@ -1,710 +0,0 @@
-/** @file
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPMUPD_H__
-#define __FSPMUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-#define MAX_CH 2 /* Maximum Number of Memory Channels */
-#define MAX_DIMM 2 /* Maximum Number of DIMMs PER Memory Channel */
-#define MAX_SPD_BYTES 512 /* Maximum Number of SPD bytes */
-
-/*
- * Memory Down structures.
- */
-typedef enum {
- STATE_MEMORY_SLOT = 0, /* No memory down and a physical memory slot. */
- STATE_MEMORY_DOWN = 1, /* Memory down and not a physical memory slot. */
-} MemorySlotState;
-
-typedef struct {
- MemorySlotState SlotState[MAX_CH][MAX_DIMM]; /* Memory Down state of
- each DIMM in each
- Channel */
- UINT16 SpdDataLen; /* Length in Bytes of a single DIMM's SPD Data */
- UINT8 *SpdDataPtr[MAX_CH][MAX_DIMM]; /* Pointer to SPD Data for each
- DIMM in each Channel */
-} MEMORY_DOWN_CONFIG;
-
-/*
-* SMBIOS Memory Info structures.
-*/
-typedef struct {
- UINT8 DimmId;
- UINT32 SizeInMb;
- UINT16 MfgId;
- UINT8
- ModulePartNum[20]; /* Module part number for DDR3 is 18 bytes
- however for DRR4 20 bytes as per JEDEC Spec,
- so reserving 20 bytes */
-} DIMM_INFO;
-
-typedef struct {
- UINT8 ChannelId;
- UINT8 DimmCount;
- DIMM_INFO DimmInfo[MAX_DIMM];
-} CHANNEL_INFO;
-
-typedef struct {
- UINT8 Revision;
- UINT16 DataWidth;
- /** As defined in SMBIOS 3.0 spec
- Section 7.18.2 and Table 75
- **/
- UINT8 MemoryType;
- UINT16 MemoryFrequencyInMHz;
- /** As defined in SMBIOS 3.0 spec
- Section 7.17.3 and Table 72
- **/
- UINT8 ErrorCorrectionType;
- UINT8 ChannelCount;
- CHANNEL_INFO ChannelInfo[MAX_CH];
-} FSP_SMBIOS_MEMORY_INFO;
-
-/*
-* GBE PCD supported states.
-*/
-typedef enum {
- BL_GBE0_GBE1_DISABLED,
- BL_GBE0_GBE1_ENABLED,
- BL_GBE1_DISABLED,
-} BL_GBE_PCD_STATE;
-
-/*
-* FIA MUX configuration structures.
-*/
-
-#define BL_ME_FIA_MUX_LANE_NUM_MAX 20
-#define BL_ME_FIA_MUX_LANE_NUM_MIN 1
-#define BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH 2
-#define BL_ME_FIA_MUX_LANE_MUX_SEL_MASK 0x3
-#define BL_ME_FIA_MUX_LANE_XHCI_ONLY 0xFF00000000
-
-typedef enum {
- BL_FIA_LANE00 = 0,
- BL_FIA_LANE01,
- BL_FIA_LANE02,
- BL_FIA_LANE03,
- BL_FIA_LANE04,
- BL_FIA_LANE05,
- BL_FIA_LANE06,
- BL_FIA_LANE07,
- BL_FIA_LANE08,
- BL_FIA_LANE09,
- BL_FIA_LANE10,
- BL_FIA_LANE11,
- BL_FIA_LANE12,
- BL_FIA_LANE13,
- BL_FIA_LANE14,
- BL_FIA_LANE15,
- BL_FIA_LANE16,
- BL_FIA_LANE17,
- BL_FIA_LANE18,
- BL_FIA_LANE19,
-} BL_ME_FIA_MUX_LANE_ORDER;
-
-#define BL_ME_FIA_MUX_LANE_SATA0_BEGING BL_FIA_LANE04
-#define BL_ME_FIA_MUX_LANE_SATA1_BEGING BL_FIA_LANE12
-
-#define BL_FIA_LANE_CONFIG(Config, Lane) \
- ((UINT64)((UINT64)(Config) \
- << ((UINT64)(Lane) * (BL_ME_FIA_MUX_LANE_MUX_SEL_WIDTH))))
-
-typedef union _BL_ME_FIA_MUX_CONFIG {
- UINT64 MeFiaMuxLaneConfig;
- struct {
- UINT64 Lane00MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
- UINT64 Lane01MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
- UINT64 Lane02MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
- UINT64 Lane03MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE
- UINT64 Lane04MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane05MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane06MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane07MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane08MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane09MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane10MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane11MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane12MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane13MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane14MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane15MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or PCIE or
- // SATA
- UINT64 Lane16MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
- // SATA
- UINT64 Lane17MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
- // SATA
- UINT64 Lane18MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
- // SATA
- UINT64 Lane19MuxSel : 2; // ME_FIA_MUX_LANE_DISABLED or XHCI or
- // SATA
- UINT64 Reserved : 24;
- } BL_MeFiaMuxLaneMuxSel;
-} BL_ME_FIA_MUX_CONFIG;
-
-typedef enum {
- BL_ME_FIA_MUX_LANE_DISCONNECTED,
- BL_ME_FIA_MUX_LANE_PCIE,
- BL_ME_FIA_MUX_LANE_SATA,
- BL_ME_FIA_MUX_LANE_XHCI,
-} BL_ME_FIA_MUX_LANE_CONFIG;
-
-#define BL_ME_FIA_SATA_LANE_SEL_WIDTH 2
-#define BL_ME_FIA_SATA_LANE_XHCI_ONLY 0x55000000
-
-typedef enum {
- BL_FIA_SATA_LANE04 = 0,
- BL_FIA_SATA_LANE05,
- BL_FIA_SATA_LANE06,
- BL_FIA_SATA_LANE07,
- BL_FIA_SATA_LANE08,
- BL_FIA_SATA_LANE09,
- BL_FIA_SATA_LANE10,
- BL_FIA_SATA_LANE11,
- BL_FIA_SATA_LANE12,
- BL_FIA_SATA_LANE13,
- BL_FIA_SATA_LANE14,
- BL_FIA_SATA_LANE15,
- BL_FIA_SATA_LANE16,
- BL_FIA_SATA_LANE17,
- BL_FIA_SATA_LANE18,
- BL_FIA_SATA_LANE19
-} BL_ME_FIA_SATA_LANE_ORDER;
-
-#define BL_FIA_SATA_LANE_CONFIG(Config, Lane) \
- ((UINT32)((UINT32)(Config) \
- << ((UINT32)(Lane) * (BL_ME_FIA_SATA_LANE_SEL_WIDTH))))
-
-typedef union _BL_ME_FIA_SATA_CONFIG {
- UINT64 MeFiaSataLaneConfig;
- struct {
- UINT64 Lane04SataSel : 2;
- UINT64 Lane05SataSel : 2;
- UINT64 Lane06SataSel : 2;
- UINT64 Lane07SataSel : 2;
- UINT64 Lane08SataSel : 2;
- UINT64 Lane09SataSel : 2;
- UINT64 Lane10SataSel : 2;
- UINT64 Lane11SataSel : 2;
- UINT64 Lane12SataSel : 2;
- UINT64 Lane13SataSel : 2;
- UINT64 Lane14SataSel : 2;
- UINT64 Lane15SataSel : 2;
- UINT64 Lane16SataSel : 2;
- UINT64 Lane17SataSel : 2;
- UINT64 Lane18SataSel : 2;
- UINT64 Lane19SataSel : 2;
- UINT64 Reserved : 32;
- } BL_MeFiaSataLaneSataSel;
-} BL_ME_FIA_SATA_CONFIG;
-
-typedef enum {
- BL_ME_FIA_SATA_CONTROLLER_LANE_ASSIGNED = 0,
- BL_ME_FIA_SATA_CONTROLLER_LANE_NOT_ASSIGNED = 1,
- BL_ME_FIA_SATA_CONTROLLER_LANE_SS_AND_GPIO_ASSIGNED = 3
-} BL_ME_FIA_SATA_LANE_CONFIG;
-
-#define BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH 4
-#define BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH 8
-#define BL_ME_FIA_PCIE_ROOT_CONFIG_XHCI_ONLY 0x0
-
-typedef enum {
- BL_FIA_PCIE_ROOT_PORT_0 = 0,
- BL_FIA_PCIE_ROOT_PORT_1,
- BL_FIA_PCIE_ROOT_PORT_2,
- BL_FIA_PCIE_ROOT_PORT_3,
- BL_FIA_PCIE_ROOT_PORT_4,
- BL_FIA_PCIE_ROOT_PORT_5,
- BL_FIA_PCIE_ROOT_PORT_6,
- BL_FIA_PCIE_ROOT_PORT_7
-} BL_ME_FIA_PCIE_ROOT_PORT_ORDER;
-
-#define BL_FIA_PCIE_ROOT_PORT_CONFIG(Type, Config, PcieRootPort) \
- (((Type) == BL_ME_FIA_PCIE_ROOT_PORT_STATE) \
- ? ((UINT64)((UINT64)(Config) << (UINT64)(PcieRootPort))) \
- : ((UINT64)( \
- (UINT64)(Config) << (UINT64)( \
- ((UINT64)(PcieRootPort) * \
- (BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_SEL_WIDTH)) + \
- BL_ME_FIA_PCIE_ROOT_PORTS_STATE_WIDTH))))
-
-typedef union _BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG {
- UINT64 MeFiaPcieRootPortsConfig;
- struct {
- UINT64 PcieRp0En : 1;
- UINT64 PcieRp1En : 1;
- UINT64 PcieRp2En : 1;
- UINT64 PcieRp3En : 1;
- UINT64 PcieRp4En : 1;
- UINT64 PcieRp5En : 1;
- UINT64 PcieRp6En : 1;
- UINT64 PcieRp7En : 1;
- UINT64 PcieRp0LinkWidth : 4;
- UINT64 PcieRp1LinkWidth : 4;
- UINT64 PcieRp2LinkWidth : 4;
- UINT64 PcieRp3LinkWidth : 4;
- UINT64 PcieRp4LinkWidth : 4;
- UINT64 PcieRp5LinkWidth : 4;
- UINT64 PcieRp6LinkWidth : 4;
- UINT64 PcieRp7LinkWidth : 4;
- UINT64 Reserved : 24;
- } BL_MeFiaPcieRpConfig;
-} BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG;
-
-typedef enum {
- BL_ME_FIA_PCIE_ROOT_PORT_STATE,
- BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH
-} BL_ME_FIA_PCIE_ROOT_PORT_CONFIG_TYPE;
-
-typedef enum {
- BL_ME_FIA_PCIE_ROOT_PORT_DISABLED,
- BL_ME_FIA_PCIE_ROOT_PORT_ENABLED
-} BL_ME_FIA_PCIE_ROOT_PORT_STATE_CONFIG;
-
-typedef enum {
- BL_ME_FIA_PCIE_ROOT_PORT_LINK_WIDTH_BICTRL = 0,
- BL_ME_FIA_PCIE_ROOT_PORT_LINK_X1 = 0xF
-} BL_ME_FIA_PCIE_ROOT_PORT_LINK_CONFIG;
-
-typedef struct _BL_ME_FIA_CONFIG {
- BL_ME_FIA_MUX_CONFIG MuxConfiguration;
- BL_ME_FIA_SATA_CONFIG SataLaneConfiguration;
- BL_ME_FIA_PCIE_ROOT_PORTS_CONFIG PcieRootPortsConfiguration;
-} BL_ME_FIA_CONFIG;
-
-/*
- * The FIA_MUX_CONFIG block describes the expected configuration of
- * FIA MUX configuration.
- */
-typedef struct {
- UINT32 SkuNumLanesAllowed; // Platform view of Num Lanes allowed
- BL_ME_FIA_CONFIG FiaMuxConfig; // Current Platform FIA MUX Configuration
- BL_ME_FIA_CONFIG FiaMuxConfigRequest; // FIA MUX Configuration Requested
-} BL_FIA_MUX_CONFIG;
-
-/*
- * The FIA_MUX_CONFIG_STATUS describes the status of configuring
- * FIA MUX configuration.
-*/
-typedef struct {
- UINT64 FiaMuxConfigGetStatus; // Status returned from FiaMuxConfigGet,
- // if not EFI_SUCCESS, then error occurred
- // and user can decide on next steps
- UINT64 FiaMuxConfigSetStatus; // Status returned from FiaMuxConfigSet,
- // if not EFI_SUCCESS, then error occurred
- // and user can decide on next steps
- BOOLEAN FiaMuxConfigSetRequired; // Boolean: true - a FiaMuxConfigSet
- // was required, false otherwise
-} BL_FIA_MUX_CONFIG_STATUS;
-
-/*
-* FIA MUX Config HOB structure
-*/
-typedef struct {
- BL_FIA_MUX_CONFIG FiaMuxConfig;
- BL_FIA_MUX_CONFIG_STATUS FiaMuxConfigStatus;
-} BL_FIA_MUX_CONFIG_HOB;
-
-/* PCIe port bifurcation codes - matches setup option values */
-#define PCIE_BIF_CTRL_x2x2x2x2 0
-#define PCIE_BIF_CTRL_x2x2x4 1
-#define PCIE_BIF_CTRL_x4x2x2 2
-#define PCIE_BIF_CTRL_x4x4 3
-#define PCIE_BIF_CTRL_x8 4
-
-#define BL_MAX_PCIE_CTRL 2
-
-/*
- * HSIO INFORMATION structure
- */
-typedef enum {
- BL_SKU_HSIO_06 = 6,
- BL_SKU_HSIO_08 = 8,
- BL_SKU_HSIO_10 = 10,
- BL_SKU_HSIO_12 = 12,
- BL_SKU_HSIO_20 = 20,
-} BL_SKU_HSIO_LANE_NUMBER;
-
-typedef struct {
- UINT16 NumLanesSupported;
- UINT8 PcieBifCtr[BL_MAX_PCIE_CTRL];
- BL_ME_FIA_CONFIG FiaConfig;
-} BL_HSIO_INFORMATION;
-
-/*
- * eMMC DLL structure for EMMC DLL registers settings
- */
-typedef struct {
- UINT32 TxCmdCntl;
- UINT32 TxDataCntl1;
- UINT32 TxDataCntl2;
- UINT32 RxCmdDataCntl1;
- UINT32 RxStrobeCntl;
- UINT32 RxCmdDataCntl2;
- UINT32 MasterSwCntl;
-} BL_EMMC_DLL_CONFIG;
-
-typedef struct {
- UINT16 Signature;
- BL_EMMC_DLL_CONFIG eMMCDLLConfig;
-} BL_EMMC_INFORMATION;
-
-typedef enum {
- BL_FAST_BOOT_CHECKER_NORMAL = 0,
- BL_FAST_BOOT_CHECKER_WARNING,
- BL_FAST_BOOT_CHECKER_CRITICAL
-} BL_FAST_BOOT_CHECKER;
-
-#define BL_MAX_SCRUB_SEGMENTS 5
-
-typedef struct {
- UINT16 Start; // Determines the low range for a memory segment (in MB)
- UINT16 End; // Determines the high range for a memory segment (in MB)
-} BL_SCRUB_SEGMENT;
-
-typedef struct {
- UINT8 NumberOfSegments;
- UINT8 Reserved;
- BL_SCRUB_SEGMENT ScrubSegment[BL_MAX_SCRUB_SEGMENTS];
-} BL_MEMORY_SCRUB_SEGMENTS;
-
-/** Fsp M Configuration
-**/
-typedef struct {
-
- /** Offset 0x0040 - Tseg Size
- Size of SMRAM memory reserved.
- 2:2 MB, 4:4 MB, 8:8 MB, 16:16 MB
- **/
- UINT8 PcdSmmTsegSize;
-
- /** Offset 0x0041 - FSP Debug Print Level
- Select the FSP debug message print level.
- 0:NO DEBUG, 1:MIN DEBUG, 2:MED DEBUG, 3:VERBOSE DEBUG
- **/
- UINT8 PcdFspDebugPrintErrorLevel;
-
- /** Offset 0x0042 - Channel 0 DIMM 0 SPD SMBus Address
- SPD SMBus Address of each DIMM slot.
- **/
- UINT8 PcdSpdSmbusAddress_0_0;
-
- /** Offset 0x0043 - Channel 0 DIMM 1 SPD SMBus Address
- SPD SMBus Address of each DIMM slot.
- **/
- UINT8 PcdSpdSmbusAddress_0_1;
-
- /** Offset 0x0044 - Channel 1 DIMM 0 SPD SMBus Address
- SPD SMBus Address of each DIMM slot.
- **/
- UINT8 PcdSpdSmbusAddress_1_0;
-
- /** Offset 0x0045 - Channel 1 DIMM 1 SPD SMBus Address
- SPD SMBus Address of each DIMM slot.
- **/
- UINT8 PcdSpdSmbusAddress_1_1;
-
- /** Offset 0x0046 - Enable Rank Margin Tool
- Enable/disable Rank Margin Tool.
- $EN_DIS
- **/
- UINT8 PcdMrcRmtSupport;
-
- /** Offset 0x0047 - RMT CPGC exp_loop_cnt
- Set the CPGC exp_loop_cnt field for RMT execution 2^(exp_loop_cnt -1).
- 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12,
- 13:13, 14:14, 15:15
- **/
- UINT8 PcdMrcRmtCpgcExpLoopCntValue;
-
- /** Offset 0x0048 - RMT CPGC num_bursts
- Set the CPGC num_bursts field for RMT execution 2^(num_bursts -1).
- 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12,
- 13:13, 14:14, 15:15
- **/
- UINT8 PcdMrcRmtCpgcNumBursts;
-
- /** Offset 0x0049 - Preserve Memory Across Reset
- Enable/disable memory preservation across reset.
- $EN_DIS
- **/
- UINT8 PcdMemoryPreservation;
-
- /** Offset 0x004A - Fast Boot
- Enable/disable Fast Boot function. Once enabled, all following boots
- will use the
- presaved MRC data to improve the boot performance.
- $EN_DIS
- **/
- UINT8 PcdFastBoot;
-
- /** Offset 0x004B - ECC Support
- Enable/disable ECC Support.
- $EN_DIS
- **/
- UINT8 PcdEccSupport;
-
- /** Offset 0x004C - HSUART Device
- Select the PCI High Speed UART Device for Serial Port.
- 0:HSUART0, 1:HSUART1, 2:HSUART2
- **/
- UINT8 PcdHsuartDevice;
-
- /** Offset 0x004D - Memory Down
- Enable/disable Memory Down function.
- $EN_DIS
- **/
- UINT8 PcdMemoryDown;
-
- /** Offset 0x004E
- **/
- UINT32 PcdMemoryDownConfigPtr;
-
- /** Offset 0x0052 - SATA Controller 0
- Enable/disable SATA Controller 0.
- $EN_DIS
- **/
- UINT8 PcdEnableSATA0;
-
- /** Offset 0x0053 - SATA Controller 1
- Enable/disable SATA Controller 1.
- $EN_DIS
- **/
- UINT8 PcdEnableSATA1;
-
- /** Offset 0x0054 - Intel Quick Assist Technology
- Enable/disable Intel Quick Assist Technology.
- $EN_DIS
- **/
- UINT8 PcdEnableIQAT;
-
- /** Offset 0x0055 - SPD Write Disable
- Select SMBus SPD Write Enable State (Default: 0 = [FORCE_ENABLE], 1 =
- [FORCE_DISABLE])
- 0:Force Enable, 1:Force Disable
- **/
- UINT8 PcdSmbusSpdWriteDisable;
-
- /** Offset 0x0056 - ME_SHUTDOWN Message
- Enable/Disable sending ME_SHUTDOWN message to ME, refer to FSP
- Integration Guide
- for details.
- $EN_DIS
- **/
- UINT8 PcdEnableMeShutdown;
-
- /** Offset 0x0057 - XHCI Controller
- Enable / Disable XHCI controller
- $EN_DIS
- **/
- UINT8 PcdEnableXhci;
-
- /** Offset 0x0058 - Memory Frequency
- Set DDR Memory Frequency, refer to FSP Integration Guide for details.
- 15:Auto, 3:1600, 4:1866, 5:2133, 6:2400
- **/
- UINT8 PcdDdrFreq;
-
- /** Offset 0x0059 - MMIO Size
- Set memory mapped IO space size
- 0:2048M, 1:1024M, 2:3072M
- **/
- UINT8 PcdMmioSize;
-
- /** Offset 0x005A - ME HECI Communication
- Enable/Disable ME HECI communication
- $EN_DIS
- **/
- UINT8 PcdMeHeciCommunication;
-
- /** Offset 0x005B - HSIO Lanes Number
- HSIO lanes number of SKU
- 6:6, 8:8, 10:10, 12:12, 20:20
- **/
- UINT8 PcdHsioLanesNumber;
-
- /** Offset 0x005C
- **/
- UINT32 PcdFiaMuxConfigPtr;
-
- /** Offset 0x0060 - Customer Revision
- The Customer can set this revision string for their own purpose.
- **/
- UINT8 PcdCustomerRevision[32];
-
- /** Offset 0x0080 - 32-Bit bus mode
- Enable/Disable 32-Bit bus memory mode.
- $EN_DIS
- **/
- UINT8 PcdHalfWidthEnable;
-
- /** Offset 0x0081 - TCL Performance
- Enable/Disable Tcl timing for performance.
- $EN_DIS
- **/
- UINT8 PcdTclIdle;
-
- /** Offset 0x0082 - Interleave Mode
- Select Interleave Mode
- 0:DISABLED, 1:MODE0, 2:MODE1, 3:MODE2
- **/
- UINT8 PcdInterleaveMode;
-
- /** Offset 0x0083 - Memory Thermal Throttling
- Enable/disable Memory Thermal Throttling management mode
- $EN_DIS
- **/
- UINT8 PcdMemoryThermalThrottling;
-
- /** Offset 0x0084 - Memory Test
- Enable / Disable Memory Test, refer to FSP Integration Guide for
- details.
- $EN_DIS
- **/
- UINT8 PcdSkipMemoryTest;
-
- /** Offset 0x0085
- **/
- BL_MEMORY_SCRUB_SEGMENTS *PcdScrubSegmentPtr;
-
- /** Offset 0x0089 - USB2 Port 1 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb2Port1Pin;
-
- /** Offset 0x008A - USB2 Port 2 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb2Port2Pin;
-
- /** Offset 0x008B - USB2 Port 3 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb2Port3Pin;
-
- /** Offset 0x008C - USB2 Port 4 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb2Port4Pin;
-
- /** Offset 0x008D - USB3 Port 1 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb3Port1Pin;
-
- /** Offset 0x008E - USB3 Port 2 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb3Port2Pin;
-
- /** Offset 0x008F - USB3 Port 3 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb3Port3Pin;
-
- /** Offset 0x0090 - USB3 Port 4 OC Pin
- Map selected OC pin to the port
- 0:OC Pin 0, 8:No pin mapped
- **/
- UINT8 PcdUsb3Port4Pin;
-
- /** Offset 0x0091 - IOxAPIC 0-199
- Enable/disable IOxAPIC 24-119 entries
- $EN_DIS
- **/
- UINT8 PcdIOxAPIC0_199;
-
- /** Offset 0x0092 - DMAP_X16
- Enable/Disable DMAP_X16 dynamic MRC field indicating memory device
- width is x16 or not
- $EN_DIS
- **/
- UINT8 PcdDmapX16;
-
- /** Offset 0x0093
- **/
- UINT8 UnusedUpdSpace0[333];
-
- /** Offset 0x01E0
- **/
- UINT8 ReservedMemoryInitUpd[16];
-} FSP_M_CONFIG;
-
-/** Fsp M UPD Configuration
-**/
-typedef struct {
-
- /** Offset 0x0000
- **/
- FSP_UPD_HEADER FspUpdHeader;
-
- /** Offset 0x0020
- **/
- FSPM_ARCH_UPD FspmArchUpd;
-
- /** Offset 0x0040
- **/
- FSP_M_CONFIG FspmConfig;
-
- /** Offset 0x01F0
- **/
- UINT8 UnusedUpdSpace1[14];
-
- /** Offset 0x01FE
- **/
- UINT16 UpdTerminator;
-} FSPM_UPD;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
deleted file mode 100644
index f76f1a5..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FspsUpd.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/** @file
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPSUPD_H__
-#define __FSPSUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-/** Fsp S Configuration
-**/
-typedef struct {
-
- /** Offset 0x0020 - PCIe Controller 0 Bifurcation
- Configure PCI Express controller 0 bifurcation.
- 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
- **/
- UINT8 PcdBifurcationPcie0;
-
- /** Offset 0x0021 - PCIe Controller 1 Bifurcation
- Configure PCI Express controller 1 bifurcation.
- 0:X2X2X2X2, 1:X2X2X4, 2:X4X2X2, 3:X4X4, 4:X8
- **/
- UINT8 PcdBifurcationPcie1;
-
- /** Offset 0x0022 - Active Core Count
- Select # of Active Cores (Default: 0, 0:ALL, 1..15 = 1..15 Cores)
- 0:ALL, 1:1, 2:2, 3:3, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11,
- 12:12, 13:13,
- 14:14, 15:15
- **/
- UINT8 PcdActiveCoreCount;
-
- /** Offset 0x0023
- **/
- UINT32 PcdCpuMicrocodePatchBase;
-
- /** Offset 0x0027
- **/
- UINT32 PcdCpuMicrocodePatchSize;
-
- /** Offset 0x002B - PCIe Controller 0
- Enable / Disable PCI Express controller 0
- $EN_DIS
- **/
- UINT8 PcdEnablePcie0;
-
- /** Offset 0x002C - PCIe Controller 1
- Enable / Disable PCI Express controller 1
- $EN_DIS
- **/
- UINT8 PcdEnablePcie1;
-
- /** Offset 0x002D - Embedded Multi-Media Controller (eMMC)
- Enable / Disable Embedded Multi-Media controller
- $EN_DIS
- **/
- UINT8 PcdEnableEmmc;
-
- /** Offset 0x002E - LAN Controllers
- Enable / Disable LAN controllers, refer to FSP Integration Guide for
- details.
- 0:Disable LAN 0 & LAN 1, 1:Enable LAN 0 & LAN 1, 2:Disable LAN 1 only
- **/
- UINT8 PcdEnableGbE;
-
- /** Offset 0x002F
- **/
- UINT32 PcdFiaMuxConfigRequestPtr;
-
- /** Offset 0x0033
- **/
- UINT8 UnusedUpdSpace0[4];
-
- /** Offset 0x0037 - PCIe Root Port 0 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort0DeEmphasis;
-
- /** Offset 0x0038 - PCIe Root Port 1 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort1DeEmphasis;
-
- /** Offset 0x0039 - PCIe Root Port 2 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort2DeEmphasis;
-
- /** Offset 0x003A - PCIe Root Port 3 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort3DeEmphasis;
-
- /** Offset 0x003B - PCIe Root Port 4 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort4DeEmphasis;
-
- /** Offset 0x003C - PCIe Root Port 5 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort5DeEmphasis;
-
- /** Offset 0x003D - PCIe Root Port 6 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort6DeEmphasis;
-
- /** Offset 0x003E - PCIe Root Port 7 DeEmphasis
- Desired DeEmphasis level for PCIE root port
- 0:6dB, 1:3.5dB
- **/
- UINT8 PcdPcieRootPort7DeEmphasis;
-
- /** Offset 0x003F
- **/
- UINT8 UnusedUpdSpace1;
-
- /** Offset 0x0040
- **/
- UINT32 PcdEMMCDLLConfigPtr;
-
- /** Offset 0x0044 - PCIe Root Port 0 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort0LinkSpeed;
-
- /** Offset 0x0045 - PCIe Root Port 1 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort1LinkSpeed;
-
- /** Offset 0x0046 - PCIe Root Port 2 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort2LinkSpeed;
-
- /** Offset 0x0047 - PCIe Root Port 3 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort3LinkSpeed;
-
- /** Offset 0x0048 - PCIe Root Port 4 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort4LinkSpeed;
-
- /** Offset 0x0049 - PCIe Root Port 5 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort5LinkSpeed;
-
- /** Offset 0x004A - PCIe Root Port 6 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort6LinkSpeed;
-
- /** Offset 0x004B - PCIe Root Port 7 Link Speed
- Upper limit on link operational speed for PCI Express RootPort
- 1:GEN1, 2:GEN2, 3:GEN3
- **/
- UINT8 PcdPcieRootPort7LinkSpeed;
-
- /** Offset 0x004C - PCIe Root Port 0 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort0Aspm;
-
- /** Offset 0x004D - PCIe Root Port 1 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort1Aspm;
-
- /** Offset 0x004E - PCIe Root Port 2 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort2Aspm;
-
- /** Offset 0x004F - PCIe Root Port 3 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort3Aspm;
-
- /** Offset 0x0050 - PCIe Root Port 4 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort4Aspm;
-
- /** Offset 0x0051 - PCIe Root Port 5 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort5Aspm;
-
- /** Offset 0x0052 - PCIe Root Port 6 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort6Aspm;
-
- /** Offset 0x0053 - PCIe Root Port 7 ASPM
- Enable PCI Express Active State Power Management settings
- 0:Disabled, 2:L1
- **/
- UINT8 PcdPcieRootPort7Aspm;
-
- /** Offset 0x0054
- **/
- UINT8 UnusedUpdSpace2[140];
-
- /** Offset 0x00E0
- **/
- UINT8 ReservedSiliconInitUpd[16];
-} FSP_S_CONFIG;
-
-/** Fsp S UPD Configuration
-**/
-typedef struct {
-
- /** Offset 0x0000
- **/
- FSP_UPD_HEADER FspUpdHeader;
-
- /** Offset 0x0020
- **/
- FSP_S_CONFIG FspsConfig;
-
- /** Offset 0x00F0
- **/
- UINT8 UnusedUpdSpace3[14];
-
- /** Offset 0x00FE
- **/
- UINT16 UpdTerminator;
-} FSPS_UPD;
-
-#pragma pack()
-
-#endif
diff --git a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
deleted file mode 100644
index f06f72bd..0000000
--- a/src/vendorcode/intel/fsp/fsp2_0/denverton_ns/FsptUpd.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/** @file
-
-Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPTUPD_H__
-#define __FSPTUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
-/** Fsp T Core UPD
-**/
-typedef struct {
-
- /** Offset 0x0020
- **/
- UINT32 MicrocodeRegionBase;
-
- /** Offset 0x0024
- **/
- UINT32 MicrocodeRegionLength;
-
- /** Offset 0x0028
- **/
- UINT32 CodeRegionBase;
-
- /** Offset 0x002C
- **/
- UINT32 CodeRegionLength;
-
- /** Offset 0x0030
- **/
- UINT8 Reserved1[16];
-} FSPT_CORE_UPD;
-
-/** Fsp T Configuration
-**/
-typedef struct {
-
- /** Offset 0x0040 - Disable Port80 output in FSP-T
- Select Port80 Control in FSP-T (0:VPD-Style, 1:Enable Port80 Output,
- 2:Disable Port80
- Output, refer to FSP Integration Guide for details
- 0:VPD-Style, 1:Enable Port80 Output[Default], 2:Disable Port80 Output
- **/
- UINT8 PcdFsptPort80RouteDisable;
-
- /** Offset 0x0041
- **/
- UINT8 ReservedTempRamInitUpd[31];
-} FSPT_CONFIG;
-
-/** Fsp T UPD Configuration
-**/
-typedef struct {
-
- /** Offset 0x0000
- **/
- FSP_UPD_HEADER FspUpdHeader;
-
- /** Offset 0x0020
- **/
- FSPT_CORE_UPD FsptCoreUpd;
-
- /** Offset 0x0040
- **/
- FSPT_CONFIG FsptConfig;
-
- /** Offset 0x0060
- **/
- UINT8 UnusedUpdSpace0[30];
-
- /** Offset 0x007E
- **/
- UINT16 UpdTerminator;
-} FSPT_UPD;
-
-#pragma pack()
-
-#endif
To view, visit change 47754. To unsubscribe, or for help writing mail filters, visit settings.