Marshall Dawson has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/32551
Change subject: soc/amd/stoneyridge: Correct bugs in lpc.c ......................................................................
soc/amd/stoneyridge: Correct bugs in lpc.c
Remove the bridge enable step of accessing D14F0x64. This method for enabling the bridge appears to be last present in the SB700 device. Beginning in the SB800 (and all FCH, SoC devices), the enable is in PMxEC[0]. Since the bridge is enabled in bootblock to allow port 80h, there is no need to maintain it in ramstage.
Correct the device used for misc. configuration of the LPC bridge. The #defined value removed is 14.0 but the settings are in 14.3.
TEST=Boot Grunt, check console and dmesg for errors and warnings BUG=b:131862871
Change-Id: I078be974dc3c78c94cb7c0832518f21bac029ff2 Signed-off-by: Marshall Dawson marshalldawson3rd@gmail.com --- M src/soc/amd/stoneyridge/lpc.c 1 file changed, 13 insertions(+), 26 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/51/32551/1
diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/stoneyridge/lpc.c index 9a8c8ef..a838146 100644 --- a/src/soc/amd/stoneyridge/lpc.c +++ b/src/soc/amd/stoneyridge/lpc.c @@ -35,31 +35,22 @@ static void lpc_init(struct device *dev) { u8 byte; - u32 dword; - - /* - * Enable the LPC Controller - * SMBus register 0x64 is not defined in public datasheet. - */ - dword = pci_read_config32(SOC_SMBUS_DEV, 0x64); - dword |= 1 << 20; - pci_write_config32(SOC_SMBUS_DEV, 0x64, dword);
/* Initialize isa dma */ isa_dma_init();
/* Enable DMA transaction on the LPC bus */ - byte = pci_read_config8(SOC_SMBUS_DEV, LPC_PCI_CONTROL); + byte = pci_read_config8(dev, LPC_PCI_CONTROL); byte |= LEGACY_DMA_EN; - pci_write_config8(SOC_SMBUS_DEV, LPC_PCI_CONTROL, byte); + pci_write_config8(dev, LPC_PCI_CONTROL, byte);
/* Disable the timeout mechanism on LPC */ - byte = pci_read_config8(SOC_SMBUS_DEV, LPC_IO_OR_MEM_DECODE_ENABLE); + byte = pci_read_config8(dev, LPC_IO_OR_MEM_DECODE_ENABLE); byte &= ~LPC_SYNC_TIMEOUT_COUNT_ENABLE; - pci_write_config8(SOC_SMBUS_DEV, LPC_IO_OR_MEM_DECODE_ENABLE, byte); + pci_write_config8(dev, LPC_IO_OR_MEM_DECODE_ENABLE, byte);
/* Disable LPC MSI Capability */ - byte = pci_read_config8(SOC_SMBUS_DEV, LPC_MISC_CONTROL_BITS); + byte = pci_read_config8(dev, LPC_MISC_CONTROL_BITS); /* BIT 1 is not defined in public datasheet. */ byte &= ~(1 << 1);
@@ -69,15 +60,15 @@ * interrupt and visit LPC. */ byte &= ~LPC_NOHOG; - pci_write_config8(SOC_SMBUS_DEV, LPC_MISC_CONTROL_BITS, byte); + pci_write_config8(dev, LPC_MISC_CONTROL_BITS, byte);
/* * Enable hand-instance of the pulse generator and SPI * controller prefetch of flash. */ - byte = pci_read_config8(SOC_SMBUS_DEV, LPC_HOST_CONTROL); + byte = pci_read_config8(dev, LPC_HOST_CONTROL); byte |= PREFETCH_EN_SPI_FROM_HOST | T_START_ENH; - pci_write_config8(SOC_SMBUS_DEV, LPC_HOST_CONTROL, byte); + pci_write_config8(dev, LPC_HOST_CONTROL, byte);
cmos_check_update_date();
@@ -161,9 +152,8 @@ pci_dev_set_resources(dev); }
-static void set_child_resource(struct device *child, - u32 *reg, - u32 *reg_x) +static void set_child_resource(struct device *dev, struct device *child, + u32 *reg, u32 *reg_x) { struct resource *res; u32 base, end; @@ -272,7 +262,7 @@ wideio_index = sb_set_wideio_range(base, res->size); if (wideio_index != WIDEIO_RANGE_ERROR) { /* preserve wide IO related bits. */ - *reg_x = pci_read_config32(SOC_LPC_DEV, + *reg_x = pci_read_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE);
printk(BIOS_DEBUG, @@ -308,11 +298,8 @@ for (child = link->children; child; child = child->sibling) { if (child->enabled - && (child->path.type == DEVICE_PATH_PNP)) { - set_child_resource(child, - ®, - ®_x); - } + && (child->path.type == DEVICE_PATH_PNP)) + set_child_resource(dev, child, ®, ®_x); } } pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, reg);