Patch Set 12:
I would really like to understand this. I've tried your mAL10 port
without this SMBus patch on Linux 4.19: SMBus works fine. For
instance `decode-dimms` shows me the SPD info (didn't test
nct7802 as I seem to lack the module).
I apologize for the delay. Yes, you're right, this also works with i2c-i801 driver on Linux.
$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +39.0°C (high = +110.0°C, crit = +110.0°C)
Core 0: +39.0°C (high = +110.0°C, crit = +110.0°C)
Core 1: +39.0°C (high = +110.0°C, crit = +110.0°C)
Core 2: +40.0°C (high = +110.0°C, crit = +110.0°C)
Core 3: +40.0°C (high = +110.0°C, crit = +110.0°C)
nct7802-i2c-5-2e
Adapter: SMBus I801 adapter at efa0
in0: +3.35 V (min = +0.00 V, max = +4.09 V)
in1: +1.91 V
in3: +1.22 V (min = +0.00 V, max = +2.05 V)
in4: +1.68 V (min = +0.00 V, max = +2.05 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +41.1°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C) sensor = thermistor
temp4: +43.0°C (low = +0.0°C, high = +85.0°C)
(crit = +100.0°C)
temp6: +0.0°C
But It seems to me that in the case of Windows, these methods are needed.
Unfortunately I can not test right now.
To view, visit change 44507. To unsubscribe, or for help writing mail filters, visit settings.