Patrick Georgi has submitted this change and it was merged. ( https://review.coreboot.org/c/coreboot/+/30326 )
Change subject: cpu/amd/geode_lx: Drop support ......................................................................
cpu/amd/geode_lx: Drop support
These chips are still using LATE_CBMEM which was agreed upon to be removed after release 4.7. It is now more than 1 year later and they still linger around.
The work and review to bring this code up to date can happen on the 4.9 branch and then squashed together and merged back into mainline when done.
Change-Id: I11290a5e92397b9b7e7e5a19b029278e728671a3 Signed-off-by: Arthur Heymans arthur@aheymans.xyz Reviewed-on: https://review.coreboot.org/c/30326 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: HAOUAS Elyes ehaouas@noos.fr Reviewed-by: Nico Huber nico.h@gmx.de --- M src/cpu/amd/Kconfig M src/cpu/amd/Makefile.inc D src/cpu/amd/geode_lx/Kconfig D src/cpu/amd/geode_lx/Makefile.inc D src/cpu/amd/geode_lx/cache_as_ram.inc D src/cpu/amd/geode_lx/cpubug.c D src/cpu/amd/geode_lx/cpureginit.c D src/cpu/amd/geode_lx/geode_lx_init.c D src/cpu/amd/geode_lx/msrinit.c D src/cpu/amd/geode_lx/syspreinit.c M src/device/Kconfig M src/device/oprom/realmode/x86.c D src/northbridge/amd/lx/Kconfig D src/northbridge/amd/lx/Makefile.inc D src/northbridge/amd/lx/generic_sdram.c D src/northbridge/amd/lx/grphinit.c D src/northbridge/amd/lx/northbridge.c D src/northbridge/amd/lx/northbridge.h D src/northbridge/amd/lx/northbridgeinit.c D src/northbridge/amd/lx/pll_reset.c D src/northbridge/amd/lx/raminit.c D src/northbridge/amd/lx/raminit.h D src/southbridge/amd/cs5536/Kconfig D src/southbridge/amd/cs5536/Makefile.inc D src/southbridge/amd/cs5536/chip.h D src/southbridge/amd/cs5536/cs5536.c D src/southbridge/amd/cs5536/cs5536.h D src/southbridge/amd/cs5536/early_setup.c D src/southbridge/amd/cs5536/early_smbus.c D src/southbridge/amd/cs5536/ide.c D src/southbridge/amd/cs5536/pirq.c D src/southbridge/amd/cs5536/smbus.c D src/southbridge/amd/cs5536/smbus.h 33 files changed, 1 insertion(+), 5,068 deletions(-)
Approvals: build bot (Jenkins): Verified Nico Huber: Looks good to me, approved HAOUAS Elyes: Looks good to me, approved
diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig index f4504a2..7a6d956 100644 --- a/src/cpu/amd/Kconfig +++ b/src/cpu/amd/Kconfig @@ -7,7 +7,6 @@ source src/cpu/amd/socket_F_1207/Kconfig
source src/cpu/amd/family_10h-family_15h/Kconfig -source src/cpu/amd/geode_lx/Kconfig
source src/cpu/amd/agesa/Kconfig source src/cpu/amd/pi/Kconfig diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc index 11a1c5b..72c6aa2 100644 --- a/src/cpu/amd/Makefile.inc +++ b/src/cpu/amd/Makefile.inc @@ -5,7 +5,6 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32 subdirs-$(CONFIG_CPU_AMD_SOCKET_FM2_NON_AGESA) += socket_FM2 subdirs-$(CONFIG_CPU_AMD_SOCKET_G34_NON_AGESA) += socket_G34 -subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx
subdirs-$(CONFIG_CPU_AMD_AGESA) += agesa subdirs-$(CONFIG_CPU_AMD_PI) += pi diff --git a/src/cpu/amd/geode_lx/Kconfig b/src/cpu/amd/geode_lx/Kconfig deleted file mode 100644 index 82a5d46..0000000 --- a/src/cpu/amd/geode_lx/Kconfig +++ /dev/null @@ -1,56 +0,0 @@ -config CPU_AMD_GEODE_LX - bool - select ARCH_BOOTBLOCK_X86_32 - select ARCH_VERSTAGE_X86_32 - select ARCH_ROMSTAGE_X86_32 - select ARCH_RAMSTAGE_X86_32 - -if CPU_AMD_GEODE_LX - -config CPU_SPECIFIC_OPTIONS - def_bool y - select NO_MMCONF_SUPPORT - select TSC_MONOTONIC_TIMER - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x8000 - -config DCACHE_BSP_STACK_SIZE - hex - default 0x2000 - -config DCACHE_BSP_STACK_SLUSH - hex - default 0x1000 - -config DCACHE_AP_STACK_SIZE - hex - default 0x400 - -config GEODE_VSA - bool - default y - -config GEODE_VSA_FILE - bool "Add a VSA image" - default y - help - Select this option if you have an AMD Geode LX vsa that you would - like to add to your ROM. - - You will be able to specify the location and file name of the - image later. - -config VSA_FILENAME - string "AMD Geode LX VSA path and filename" - depends on GEODE_VSA_FILE - default "3rdparty/blobs/cpu/amd/geode_lx/gpl_vsa_lx_102.bin" - help - The path and filename of the file to use as VSA. - -endif # CPU_AMD_GEODE_LX diff --git a/src/cpu/amd/geode_lx/Makefile.inc b/src/cpu/amd/geode_lx/Makefile.inc deleted file mode 100644 index 99be61e..0000000 --- a/src/cpu/amd/geode_lx/Makefile.inc +++ /dev/null @@ -1,18 +0,0 @@ -subdirs-y += ../../x86/tsc -subdirs-y += ../../x86/lapic -subdirs-y += ../../x86/cache -subdirs-y += ../../x86/smm - -romstage-y += cpureginit.c -romstage-y += syspreinit.c -romstage-y += msrinit.c - -ramstage-y += geode_lx_init.c -ramstage-y += cpubug.c - -cpu_incs-y += $(src)/cpu/amd/geode_lx/cache_as_ram.inc - -cbfs-files-$(CONFIG_GEODE_VSA_FILE) += vsa -vsa-file = $(call strip_quotes,$(CONFIG_VSA_FILENAME)):vsa -vsa-type = stage -vsa-required = VSA binary (binary and MASM source code available in coreboot/3rdparty/blobs repository) diff --git a/src/cpu/amd/geode_lx/cache_as_ram.inc b/src/cpu/amd/geode_lx/cache_as_ram.inc deleted file mode 100644 index 8250d72..0000000 --- a/src/cpu/amd/geode_lx/cache_as_ram.inc +++ /dev/null @@ -1,225 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#define LX_STACK_BASE CONFIG_DCACHE_RAM_BASE /* this is where the DCache will be mapped and be used as stack, It would be cool if it was the same base as coreboot normal stack */ -#define LX_STACK_END LX_STACK_BASE+(CONFIG_DCACHE_RAM_SIZE-1) - -#define LX_NUM_CACHELINES 0x080 /* there are 128lines per way */ -#define LX_CACHELINE_SIZE 0x020 /* there are 32bytes per line */ -#define LX_CACHEWAY_SIZE (LX_NUM_CACHELINES * LX_CACHELINE_SIZE) -#define CR0_CD 0x40000000 /* bit 30 = Cache Disable */ -#define CR0_NW 0x20000000 /* bit 29 = Not Write Through */ - -#include <cpu/amd/lxdef.h> -#include <cpu/x86/post_code.h> - -/** - * DCacheSetup - * Setup data cache for use as RAM for a stack. - */ -DCacheSetup: - /* Save the BIST result */ - movl %eax, %ebx - - invd - /* set cache properties */ - movl $CPU_RCONF_DEFAULT, %ecx - rdmsr - movl $0x010010000, %eax /*1MB system memory in write back 1|00100|00 */ - wrmsr - - /* in LX DCDIS is set after POR which disables the cache..., clear this bit */ - movl $CPU_DM_CONFIG0,%ecx - rdmsr - andl $(~(DM_CONFIG0_LOWER_DCDIS_SET)), %eax /* TODO: make consistent with i$ init, either whole reg = 0, or just this bit... */ - wrmsr - - /* get cache timing params from BIOS config data locations and apply */ - /* fix delay controls for DM and IM arrays */ - /* fix delay controls for DM and IM arrays */ - movl $CPU_BC_MSS_ARRAY_CTL0, %ecx - xorl %edx, %edx - movl $0x2814D352, %eax - wrmsr - - movl $CPU_BC_MSS_ARRAY_CTL1, %ecx - xorl %edx, %edx - movl $0x1068334D, %eax - wrmsr - - movl $CPU_BC_MSS_ARRAY_CTL2, %ecx - movl $0x00000106, %edx - movl $0x83104104, %eax - wrmsr - - movl $GLCP_FIFOCTL, %ecx - rdmsr - movl $0x00000005, %edx - wrmsr - - /* Enable setting */ - movl $CPU_BC_MSS_ARRAY_CTL_ENA, %ecx - xorl %edx, %edx - movl $0x01, %eax - wrmsr - - /* Get cleaned up. */ - xorl %edi, %edi - xorl %esi, %esi - xorl %ebp, %ebp - - /* DCache Ways0 through Ways7 will be tagged for LX_STACK_BASE + CONFIG_DCACHE_RAM_SIZE for holding stack */ - /* remember, there is NO stack yet... */ - - /* Tell cache we want to fill WAY 0 starting at the top */ - xorl %edx, %edx - xorl %eax, %eax - movl $CPU_DC_INDEX, %ecx - wrmsr - - /* startaddress for tag of Way0: ebp will hold the incrementing address. dont destroy! */ - movl $LX_STACK_BASE, %ebp /* init to start address */ - orl $1, %ebp /* set valid bit and tag for this Way (B[31:12] : Cache tag value for line/way curr. selected by CPU_DC_INDEX */ - - /* start tag Ways 0 with 128 lines with 32bytes each: edi will hold the line counter. dont destroy! */ - movl $LX_NUM_CACHELINES, %edi -DCacheSetupFillWay: - - /* fill with dummy data: zero it so we can tell it from PCI memory space (returns FFs). */ - /* We will now store a line (32 bytes = 4 x 8bytes = 4 quadWords) */ - movw $0x04, %si - xorl %edx, %edx - xorl %eax, %eax - movl $CPU_DC_DATA, %ecx -DCacheSetup_quadWordLoop: - wrmsr - decw %si - jnz DCacheSetup_quadWordLoop - - /* Set the tag for this line, need to do this for every new cache line to validate it! */ - /* accessing CPU_DC_TAG_I makes the LINE field in CPU_DC_INDEX increment and thus cont. in the next cache line... */ - xorl %edx, %edx - movl %ebp, %eax - movl $CPU_DC_TAG, %ecx - wrmsr - - /* switch to next line */ - /* lines are in Bits10:4 */ - /* when index is crossing 0x7F -> 0x80 writing a RSVD bit as 0x80 is not a valid CL anymore! */ - movl $CPU_DC_INDEX, %ecx - rdmsr - addl $0x010, %eax /* TODO: prob. would be more elegant to calc. this from counter var edi... */ - wrmsr - - decl %edi - jnz DCacheSetupFillWay - - /* 1 Way has been filled, forward start address for next Way, terminate if we have reached end of desired address range */ - addl $LX_CACHEWAY_SIZE, %ebp - cmpl $LX_STACK_END, %ebp - jge leave_DCacheSetup - movl $LX_NUM_CACHELINES, %edi - - /* switch to next way */ - movl $CPU_DC_INDEX, %ecx - rdmsr - addl $0x01, %eax - andl $0xFFFFF80F, %eax /* lets be sure: reset line index Bits10:4 */ - wrmsr - - jmp DCacheSetupFillWay - -leave_DCacheSetup: - xorl %edi, %edi - xorl %esi, %esi - xorl %ebp, %ebp - - /* Disable the cache, but ... DO NOT INVALIDATE the tags. */ - /* Memory reads and writes will all hit in the cache. */ - /* Cache updates and memory write-backs will not occur ! */ - movl %cr0, %eax - orl $(CR0_CD + CR0_NW), %eax /* set the CD and NW bits */ - movl %eax, %cr0 - - /* Now point sp to the cached stack. */ - /* The stack will be fully functional at this location. No system memory is required at all ! */ - /* set up the stack pointer */ - movl $LX_STACK_END, %eax - movl %eax, %esp - - /* test the stack*/ - movl $0x0F0F05A5A, %edx - pushl %edx - popl %ecx - cmpl %ecx, %edx - je DCacheSetupGood - - post_code(0xc5) -DCacheSetupBad: - hlt /* issues */ - jmp DCacheSetupBad -DCacheSetupGood: - /* Go do early init and memory setup */ - - /* Restore the BIST result */ - movl %ebx, %eax - movl %esp, %ebp - pushl %eax - - post_code(0x23) - - /* Call romstage.c main function */ - call mainboard_romstage_entry - -.global done_cache_as_ram_main -done_cache_as_ram_main: - - /* We now run over the stack-in-cache, - * copying it back to itself to invalidate the cache */ - - push %edi - mov $(CONFIG_DCACHE_RAM_SIZE >> 2),%ecx - push %esi - mov $(CONFIG_DCACHE_RAM_BASE),%edi - mov %edi,%esi - cld - rep movsl %ds:(%esi),%es:(%edi) - pop %esi - pop %edi - - /* Clear the cache out to RAM */ - wbinvd - /* re-enable the cache */ - movl %cr0, %eax - xorl $(CR0_CD + CR0_NW), %eax /* clear the CD and NW bits */ - movl %eax, %cr0 - -__main: - post_code(POST_PREPARE_RAMSTAGE) - - /* TODO For suspend/resume low memory needs backup store. */ - - cld /* clear direction flag */ - - /* copy coreboot from it's initial load location to - * the location it is compiled to run at. - * Normally this is copying from FLASH ROM to RAM. - */ - call copy_and_run - -.Lhlt: - post_code(POST_DEAD_CODE) - hlt - jmp .Lhlt diff --git a/src/cpu/amd/geode_lx/cpubug.c b/src/cpu/amd/geode_lx/cpubug.c deleted file mode 100644 index 7e7d81b..0000000 --- a/src/cpu/amd/geode_lx/cpubug.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Indrek Kruusa indrek.kruusa@artecdesign.ee - * Copyright (C) 2006 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <stdint.h> -#include <device/device.h> -#include <stdlib.h> -#include <string.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> - -/** - * - * pcideadlock - * - * Bugtool #465 and #609 - * PCI cache deadlock - * There is also fix code in cache and PCI functions. - * This bug is very is pervasive. - */ -static void pcideadlock(void) -{ - msr_t msr; - - /* - * forces serialization of all load misses. Setting this bit prevents the - * DM pipe from backing up if a read request has to be held up waiting - * for PCI writes to complete. - */ - msr = rdmsr(CPU_DM_CONFIG0); - msr.lo |= DM_CONFIG0_LOWER_MISSER_SET; - wrmsr(CPU_DM_CONFIG0, msr); - - /* write serialize memory hole to PCI. Need to unWS when something is - * shadowed regardless of cachablility. - */ - msr.lo = 0x021212121; - msr.hi = 0x021212121; - wrmsr(CPU_RCONF_A0_BF, msr); - wrmsr(CPU_RCONF_C0_DF, msr); - wrmsr(CPU_RCONF_E0_FF, msr); -} - -/** - * DisableMemoryReorder - * - * PBZ 3659: - * The MC reordered transactions incorrectly and breaks coherency. - * Disable reordering and take a potential performance hit. - * This is safe to do here and not in MC init since there is nothing - * to maintain coherency with and the cache is not enabled yet. - */ -static void disablememoryreadorder(void) -{ - msr_t msr; - - msr = rdmsr(MC_CF8F_DATA); - msr.hi |= CF8F_UPPER_REORDER_DIS_SET; - wrmsr(MC_CF8F_DATA, msr); -} - -/* For CPU version C3. Should be the only released version */ -void cpubug(void) -{ - pcideadlock(); - disablememoryreadorder(); - printk(BIOS_DEBUG, "Done cpubug fixes\n"); -} diff --git a/src/cpu/amd/geode_lx/cpureginit.c b/src/cpu/amd/geode_lx/cpureginit.c deleted file mode 100644 index a61501e..0000000 --- a/src/cpu/amd/geode_lx/cpureginit.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Indrek Kruusa indrek.kruusa@artecdesign.ee - * Copyright (C) 2006 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <spd.h> -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <northbridge/amd/lx/raminit.h> -#include <northbridge/amd/lx/northbridge.h> - -/** - * Delay Control Settings table from AMD (MCP 0x4C00000F). - */ -static const msrinit_t delay_msr_table[] = { - {CPU_BC_MSS_ARRAY_CTL0, {.hi = 0x00000000, .lo = 0x2814D352}}, - {CPU_BC_MSS_ARRAY_CTL1, {.hi = 0x00000000, .lo = 0x1068334D}}, - {CPU_BC_MSS_ARRAY_CTL2, {.hi = 0x00000106, .lo = 0x83104104}}, -}; - -static const struct delay_controls { - u8 dimms; - u8 devices; - u32 slow_hi; - u32 slow_low; - u32 fast_hi; - u32 fast_low; -} delay_control_table[] = { - /* DIMMs Devs Slow (<=333MHz) Fast (>334MHz) */ - { 1, 4, 0x0837100FF, 0x056960004, 0x0827100FF, 0x056960004 }, - { 1, 8, 0x0837100AA, 0x056960004, 0x0827100AA, 0x056960004 }, - { 1, 16, 0x0837100AA, 0x056960004, 0x082710055, 0x056960004 }, - { 2, 8, 0x0837100A5, 0x056960004, 0x082710000, 0x056960004 }, - { 2, 16, 0x0937100A5, 0x056960004, 0x0C27100A5, 0x056960004 }, - { 2, 20, 0x0B37100A5, 0x056960004, 0x0B27100A5, 0x056960004 }, - { 2, 24, 0x0B37100A5, 0x056960004, 0x0B27100A5, 0x056960004 }, - { 2, 32, 0x0B37100A5, 0x056960004, 0x0B2710000, 0x056960004 }, -}; - -/* - * Bit 55 (disable SDCLK 1,3,5) should be set if there is a single DIMM - * in slot 0, but it should be clear for all 2 DIMM settings and if a - * single DIMM is in slot 1. Bits 54:52 should always be set to '111'. - * - * Settings for single DIMM and no VTT termination (like DB800 platform) - * 0xF2F100FF 0x56960004 - * ------------------------------------- - * ADDR/CTL have 22 ohm series R - * DQ/DQM/DQS have 33 ohm series R - */ - -/** - * This is Black Magic DRAM timing juju[1]. - * - * DRAM delay depends on CPU clock, memory bus clock, memory bus loading, - * memory bus termination, your middle initial (ha! caught you!), GeodeLink - * clock rate, and DRAM timing specifications. - * - * From this the code computes a number which is "known to work". No, - * hardware is not an exact science. And, finally, if an FS2 (JTAG debugger) - * is hooked up, then just don't do anything. This code was written by a master - * of the Dark Arts at AMD and should not be modified in any way. - * - * [1] (http://www.thefreedictionary.com/juju) - * - * @param dimm0 The SMBus address of DIMM 0 (mainboard dependent). - * @param dimm1 The SMBus address of DIMM 1 (mainboard dependent). - * @param terminated The bus is terminated. (mainboard dependent). - */ -static void SetDelayControl(u8 dimm0, u8 dimm1, int terminated) -{ - u32 glspeed; - u8 spdbyte0, spdbyte1, dimms, i; - msr_t msr; - - glspeed = GeodeLinkSpeed(); - - /* Fix delay controls for DM and IM arrays. */ - for (i = 0; i < ARRAY_SIZE(delay_msr_table); i++) - wrmsr(delay_msr_table[i].index, delay_msr_table[i].msr); - - msr = rdmsr(GLCP_FIFOCTL); - msr.hi = 0x00000005; - wrmsr(GLCP_FIFOCTL, msr); - - /* Enable setting. */ - msr.hi = 0; - msr.lo = 0x00000001; - wrmsr(CPU_BC_MSS_ARRAY_CTL_ENA, msr); - - /* Debug Delay Control setup check. - * Leave it alone if it has been setup. FS2 or something is here. - */ - msr = rdmsr(GLCP_DELAY_CONTROLS); - if (msr.lo & ~(DELAY_LOWER_STATUS_MASK)) - return; - - /* Delay Controls based on DIMM loading. UGH! - * Number of devices = module width (SPD 6) / device width (SPD 13) - * * physical banks (SPD 5) - * - * Note: We only support a module width of 64. - */ - dimms = 0; - spdbyte0 = spd_read_byte(dimm0, SPD_PRIMARY_SDRAM_WIDTH); - if (spdbyte0 != 0xFF) { - dimms++; - spdbyte0 = (u8)64 / spdbyte0 * - (u8)(spd_read_byte(dimm0, SPD_NUM_DIMM_BANKS)); - } else { - spdbyte0 = 0; - } - - spdbyte1 = spd_read_byte(dimm1, SPD_PRIMARY_SDRAM_WIDTH); - if (spdbyte1 != 0xFF) { - dimms++; - spdbyte1 = (u8)64 / spdbyte1 * - (u8)(spd_read_byte(dimm1, SPD_NUM_DIMM_BANKS)); - } else { - spdbyte1 = 0; - } - - /* Zero GLCP_DELAY_CONTROLS MSR */ - msr.hi = msr.lo = 0; - - /* Save some power, disable clock to second DIMM if it is empty. */ - if (spdbyte1 == 0) - msr.hi |= DELAY_UPPER_DISABLE_CLK135; - - spdbyte0 += spdbyte1; - - if ((dimms == 1) && (terminated == DRAM_TERMINATED)) { - msr.hi = 0xF2F100FF; - msr.lo = 0x56960004; - } else for (i = 0; i < ARRAY_SIZE(delay_control_table); i++) { - if ((dimms == delay_control_table[i].dimms) && - (spdbyte0 <= delay_control_table[i].devices)) { - if (glspeed < 334) { - msr.hi |= delay_control_table[i].slow_hi; - msr.lo |= delay_control_table[i].slow_low; - } else { - msr.hi |= delay_control_table[i].fast_hi; - msr.lo |= delay_control_table[i].fast_low; - } - break; - } - } - wrmsr(GLCP_DELAY_CONTROLS, msr); -} - -void cpuRegInit(int debug_clock_disable, u8 dimm0, u8 dimm1, int terminated) -{ - int msrnum; - msr_t msr; - - /* Castle 2.0 BTM periodic sync period. */ - /* [40:37] 1 sync record per 256 bytes */ - printk(BIOS_DEBUG, "Castle 2.0 BTM periodic sync period.\n"); - msrnum = CPU_PF_CONF; - msr = rdmsr(msrnum); - msr.hi |= (0x8 << 5); - wrmsr(msrnum, msr); - - /* - * LX performance setting. - * Enable Quack for fewer re-RAS on the MC - */ - printk(BIOS_DEBUG, "Enable Quack for fewer re-RAS on the MC\n"); - msrnum = GLIU0_ARB; - msr = rdmsr(msrnum); - msr.hi &= ~ARB_UPPER_DACK_EN_SET; - msr.hi |= ARB_UPPER_QUACK_EN_SET; - wrmsr(msrnum, msr); - - msrnum = GLIU1_ARB; - msr = rdmsr(msrnum); - msr.hi &= ~ARB_UPPER_DACK_EN_SET; - msr.hi |= ARB_UPPER_QUACK_EN_SET; - wrmsr(msrnum, msr); - - /* GLIU port active enable, limit south pole masters - * (AES and PCI) to one outstanding transaction. - */ - printk(BIOS_DEBUG, " GLIU port active enable\n"); - msrnum = GLIU1_PORT_ACTIVE; - msr = rdmsr(msrnum); - msr.lo &= ~0x880; - wrmsr(msrnum, msr); - - /* Set the Delay Control in GLCP */ - printk(BIOS_DEBUG, "Set the Delay Control in GLCP\n"); - SetDelayControl(dimm0, dimm1, terminated); - - /* Enable RSDC */ - printk(BIOS_DEBUG, "Enable RSDC\n"); - msrnum = CPU_AC_SMM_CTL; - msr = rdmsr(msrnum); - msr.lo |= SMM_INST_EN_SET; - wrmsr(msrnum, msr); - - /* FPU imprecise exceptions bit */ - printk(BIOS_DEBUG, "FPU imprecise exceptions bit\n"); - msrnum = CPU_FPU_MSR_MODE; - msr = rdmsr(msrnum); - msr.lo |= FPU_IE_SET; - wrmsr(msrnum, msr); - - /* Power Savers (Do after BIST) */ - /* Enable Suspend on HLT & PAUSE instructions */ - printk(BIOS_DEBUG, "Enable Suspend on HLT & PAUSE instructions\n"); - msrnum = CPU_XC_CONFIG; - msr = rdmsr(msrnum); - msr.lo |= XC_CONFIG_SUSP_ON_HLT | XC_CONFIG_SUSP_ON_PAUSE; - wrmsr(msrnum, msr); - - /* Enable SUSP and allow TSC to run in Suspend (keep speed detection happy) */ - printk(BIOS_DEBUG, "Enable SUSP and allow TSC to run in Suspend\n"); - msrnum = CPU_BC_CONF_0; - msr = rdmsr(msrnum); - msr.lo |= TSC_SUSP_SET | SUSP_EN_SET; - msr.lo &= 0x0F0FFFFFF; - msr.lo |= 0x002000000; /* PBZ213: Set PAUSEDLY = 2 */ - wrmsr(msrnum, msr); - - /* Disable the debug clock to save power. */ - /* NOTE: leave it enabled for fs2 debug */ - if (debug_clock_disable && 0) { - msrnum = GLCP_DBGCLKCTL; - msr.hi = 0; - msr.lo = 0; - wrmsr(msrnum, msr); - } - - /* Setup throttling delays to proper mode if it is ever enabled. */ - printk(BIOS_DEBUG, "Setup throttling delays to proper mode\n"); - msrnum = GLCP_TH_OD; - msr.hi = 0; - msr.lo = 0x00000603C; - wrmsr(msrnum, msr); - printk(BIOS_DEBUG, "Done cpuRegInit\n"); -} diff --git a/src/cpu/amd/geode_lx/geode_lx_init.c b/src/cpu/amd/geode_lx/geode_lx_init.c deleted file mode 100644 index e620131..0000000 --- a/src/cpu/amd/geode_lx/geode_lx_init.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Indrek Kruusa indrek.kruusa@artecdesign.ee - * Copyright (C) 2006 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2006 Stefan Reinauer stepan@coresystems.de - * Copyright (C) 2006 Andrei Birjukov andrei.birjukov@artecdesign.ee - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <string.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/x86/cache.h> -#include <arch/io.h> - -static void vsm_end_post_smi(void) -{ - __asm__ volatile ("push %ax\n" - "mov $0x5000, %ax\n" - ".byte 0x0f, 0x38\n" "pop %ax\n"); -} - -static void geode_lx_init(struct device *dev) -{ - printk(BIOS_DEBUG, "geode_lx_init\n"); - - /* Turn on caching if we haven't already */ - x86_enable_cache(); - - /* Enable the local CPU APICs */ - //setup_lapic(); - - // do VSA late init - vsm_end_post_smi(); - - // Set gate A20 (legacy vsm disables it in late init) - printk(BIOS_DEBUG, "A20 (0x92): %d\n", inb(0x92)); - outb(0x02, 0x92); - printk(BIOS_DEBUG, "A20 (0x92): %d\n", inb(0x92)); - - printk(BIOS_DEBUG, "CPU geode_lx_init DONE\n"); -}; - -static struct device_operations cpu_dev_ops = { - .init = geode_lx_init, -}; - -static const struct cpu_device_id cpu_table[] = { - {X86_VENDOR_AMD, 0x05A2}, - {0, 0}, -}; - -static const struct cpu_driver driver __cpu_driver = { - .ops = &cpu_dev_ops, - .id_table = cpu_table, -}; diff --git a/src/cpu/amd/geode_lx/msrinit.c b/src/cpu/amd/geode_lx/msrinit.c deleted file mode 100644 index 827bb61..0000000 --- a/src/cpu/amd/geode_lx/msrinit.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdlib.h> -#include <cpu/amd/lxdef.h> -#include <cpu/x86/msr.h> -#include <northbridge/amd/lx/northbridge.h> - -static const msrinit_t msr_table[] = -{ - {CPU_RCONF_DEFAULT, {.hi = 0x24fffc00,.lo = 0x0000A000}}, /* Setup access to cache under 1MB. - * Rom Properties: Write Serialize, WriteProtect. - * RomBase: 0xFFFC0 - * SysTop to RomBase Properties: Write Back. - * SysTop: 0x000A0 - * System Memory Properties: (Write Back) */ - {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */ - {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */ - {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */ - - /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */ - {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF - {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF - {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF - {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF - {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF - {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF - - /* Pre-setup access to memory above 1Mb. Here we set up about 500Mb of memory. - * It doesn't really matter in fact how much, however, because the only usage - * of this extended memory will be to host the ramstage stage at RAMBASE, - * currently 1Mb. - * These registers will be set to their correct value by the Northbridge init code. - * - * WARNING: if ramstage could not be loaded, these registers are probably - * incorrectly set here. You may comment the following two lines and set RAMBASE - * to 0x4000 to revert to the previous behavior for LX-boards. - */ - {MSR_GLIU0_SYSMEM, {.hi = 0x2000001F,.lo = 0x6BF00100}}, // 0x100000-0x1F6BF000 - {MSR_GLIU1_SYSMEM, {.hi = 0x2000001F,.lo = 0x6BF00100}}, // 0x100000-0x1F6BF000 -}; - -void lx_msr_init(void) -{ - int i; - for (i = 0; i < ARRAY_SIZE(msr_table); i++) - wrmsr(msr_table[i].index, msr_table[i].msr); -} diff --git a/src/cpu/amd/geode_lx/syspreinit.c b/src/cpu/amd/geode_lx/syspreinit.c deleted file mode 100644 index f30c059..0000000 --- a/src/cpu/amd/geode_lx/syspreinit.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Indrek Kruusa indrek.kruusa@artecdesign.ee - * Copyright (C) 2006 Ronald G. Minnich rminnich@gmail.com - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <cpu/amd/lxdef.h> - -/** - * StartTimer1 - * - * Entry: none - * Exit: Starts Timer 1 for port 61 use - * Destroys: Al, - */ -static void StartTimer1(void) -{ - outb(0x56, 0x43); - outb(0x12, 0x41); -} - -void SystemPreInit(void) -{ - /* they want a jump ... */ - StartTimer1(); -} diff --git a/src/device/Kconfig b/src/device/Kconfig index 66f57d9..85f1d65 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -170,7 +170,7 @@ prompt "Option ROM execution type" default PCI_OPTION_ROM_RUN_YABEL if !ARCH_X86 default PCI_OPTION_ROM_RUN_REALMODE if ARCH_X86 - depends on VGA_ROM_RUN || GEODE_VSA + depends on VGA_ROM_RUN
config PCI_OPTION_ROM_RUN_REALMODE prompt "Native mode" @@ -185,7 +185,6 @@ config PCI_OPTION_ROM_RUN_YABEL prompt "Secure mode" bool - depends on !GEODE_VSA help If you select this option, the x86emu CPU emulator will be used to execute PCI Option ROMs. diff --git a/src/device/oprom/realmode/x86.c b/src/device/oprom/realmode/x86.c index d9fac36..20c6ea9 100644 --- a/src/device/oprom/realmode/x86.c +++ b/src/device/oprom/realmode/x86.c @@ -355,82 +355,6 @@ #endif }
-#if IS_ENABLED(CONFIG_GEODE_VSA) - -#define VSA2_BUFFER 0x60000 -#define VSA2_ENTRY_POINT 0x60020 - -// TODO move to a header file. -void do_vsmbios(void); - -/* VSA virtual register helper */ -static u32 VSA_vrRead(u16 classIndex) -{ - u32 eax, ebx, ecx, edx; - asm volatile ( - "movw $0x0AC1C, %%dx\n" - "orl $0x0FC530000, %%eax\n" - "outl %%eax, %%dx\n" - "addb $2, %%dl\n" - "inw %%dx, %%ax\n" - : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) - : "a"(classIndex) - ); - - return eax; -} - -void do_vsmbios(void) -{ - printk(BIOS_DEBUG, "Preparing for VSA...\n"); - - /* Set up C interrupt handlers */ - setup_interrupt_handlers(); - - /* Setting up realmode IDT */ - setup_realmode_idt(); - - /* Make sure the code is placed. */ - setup_realmode_code(); - - if ((uintptr_t)cbfs_boot_load_stage_by_name("vsa") != - VSA2_ENTRY_POINT) { - printk(BIOS_ERR, "Failed to load VSA.\n"); - return; - } - - unsigned char *buf = (unsigned char *)VSA2_BUFFER; - printk(BIOS_DEBUG, "VSA: Buffer @%p *[0k]=%02x\n", buf, buf[0]); - printk(BIOS_DEBUG, "VSA: Signature *[0x20-0x23] is %02x:%02x:%02x:%02x\n", - buf[0x20], buf[0x21], buf[0x22], buf[0x23]); - - /* Check for code to emit POST code at start of VSA. */ - if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) || - (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) { - printk(BIOS_WARNING, "VSA: Signature incorrect. Install failed.\n"); - return; - } - - printk(BIOS_DEBUG, "Calling VSA module...\n"); - - /* ECX gets SMM, EDX gets SYSMEM */ - realmode_call(VSA2_ENTRY_POINT, 0x0, 0x0, MSR_GLIU0_SMM, - MSR_GLIU0_SYSMEM, 0x0, 0x0); - - printk(BIOS_DEBUG, "... VSA module returned.\n"); - - /* Restart timer 1 */ - outb(0x56, 0x43); - outb(0x12, 0x41); - - /* Check that VSA is running OK */ - if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE) - printk(BIOS_DEBUG, "VSM: VSA2 VR signature verified.\n"); - else - printk(BIOS_ERR, "VSM: VSA2 VR signature not valid. Install failed.\n"); -} -#endif - /* interrupt_handler() is called from assembler code only, * so there is no use in putting the prototype into a header file. */ diff --git a/src/northbridge/amd/lx/Kconfig b/src/northbridge/amd/lx/Kconfig deleted file mode 100644 index 53a0e05..0000000 --- a/src/northbridge/amd/lx/Kconfig +++ /dev/null @@ -1,39 +0,0 @@ -config NORTHBRIDGE_AMD_LX - bool - select GEODE_VSA - select LATE_CBMEM_INIT - select NO_RELOCATABLE_RAMSTAGE - -if NORTHBRIDGE_AMD_LX - -config VIDEO_MB - int - default 8 - -config PLL_MANUAL_CONFIG - bool - -if PLL_MANUAL_CONFIG - -# "Core/GLIU Frequency" -config CORE_GLIU_500_266 - bool # "500MHz / 266MHz" - -config CORE_GLIU_500_333 - bool # "500MHz / 333MHz" - -config CORE_GLIU_500_400 - bool # "500MHz / 400MHz" - -config PLLMSRhi - hex - default 0x39c if CORE_GLIU_500_266 - default 0x49c if CORE_GLIU_500_333 - default 0x59c if CORE_GLIU_500_400 - -config PLLMSRlo - hex - -endif - -endif diff --git a/src/northbridge/amd/lx/Makefile.inc b/src/northbridge/amd/lx/Makefile.inc deleted file mode 100644 index e36139f..0000000 --- a/src/northbridge/amd/lx/Makefile.inc +++ /dev/null @@ -1,11 +0,0 @@ -ifeq ($(CONFIG_NORTHBRIDGE_AMD_LX),y) - -ramstage-y += northbridge.c -ramstage-y += northbridgeinit.c -ramstage-y += grphinit.c - -romstage-y += raminit.c -romstage-y += generic_sdram.c -romstage-y += pll_reset.c - -endif diff --git a/src/northbridge/amd/lx/generic_sdram.c b/src/northbridge/amd/lx/generic_sdram.c deleted file mode 100644 index e0869cd..0000000 --- a/src/northbridge/amd/lx/generic_sdram.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <northbridge/amd/lx/raminit.h> - -/* Setup SDRAM */ -void sdram_initialize(int controllers, const struct mem_controller *ctrl) -{ - int i; - /* Set the registers we can set once to reasonable values */ - for (i = 0; i < controllers; i++) { - printk(BIOS_DEBUG, "Ram1.%02x\n", i); - sdram_set_registers(ctrl + i); - } - - /* Now setup those things we can auto detect */ - for (i = 0; i < controllers; i++) { - printk(BIOS_DEBUG, "Ram2.%02x\n", i); - sdram_set_spd_registers(ctrl + i); - } - - /* Now that everything is setup enable the SDRAM. - * Some chipsets do the work for us while on others - * we need to it by hand. - */ - printk(BIOS_DEBUG, "Ram3\n"); - - sdram_enable(controllers, ctrl); - - printk(BIOS_DEBUG, "Ram4\n"); -} diff --git a/src/northbridge/amd/lx/grphinit.c b/src/northbridge/amd/lx/grphinit.c deleted file mode 100644 index 1adb9af..0000000 --- a/src/northbridge/amd/lx/grphinit.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <stdint.h> -#include <cpu/amd/vr.h> -#include <console/console.h> -#include <cpu/amd/lxdef.h> -#include <cpu/x86/msr.h> -#include <stdlib.h> - -void geodelx_vga_msr_init(void); -void graphics_init(void); - -struct msrinit { - u32 msrnum; - msr_t msr; -}; - -static const struct msrinit geodelx_vga_msr[] = { - /* Enable the GLIU Memory routing to the hardware - * PDID1 : Port 4, GLIU0 - * PBASE : 0x000A0 - * PMASK : 0xFFFE0 - */ - {.msrnum = MSR_GLIU0_BASE4, {.lo = 0x0a0fffe0, .hi = 0x80000000}}, - /* Enable the GLIU IO Routing - * IDID : Port 4, GLIU0 - * IBASE : 0x003c0 - * IMASK : 0xffff0 - */ - {.msrnum = GLIU0_IOD_BM_0, {.lo = 0x3c0ffff0, .hi = 0x80000000}}, - /* Enable the GLIU IO Routing - * IDID : Port 4, GLIU0 - * IBASE : 0x003d0 - * IMASK : 0xffff0 - */ - {.msrnum = GLIU0_IOD_BM_1, {.lo = 0x3d0ffff0, .hi = 0x80000000}}, -}; - -void geodelx_vga_msr_init(void) -{ - int i; - for (i = 0; i < ARRAY_SIZE(geodelx_vga_msr); i++) - wrmsr(geodelx_vga_msr[i].msrnum, geodelx_vga_msr[i].msr); -} - - /* - * This function mirrors the Graphics_Init routine in GeodeROM. - */ -void graphics_init(void) -{ - uint16_t wClassIndex, wData, res; - - /* SoftVG initialization */ - printk(BIOS_DEBUG, "Graphics init...\n"); - - geodelx_vga_msr_init(); - - /* Call SoftVG with the main configuration parameters. */ - /* NOTE: SoftVG expects the memory size to be given in 2MB blocks */ - - wClassIndex = (VRC_VG << 8) + VG_CONFIG; - - /* - * Graphics Driver Enabled (13) 0, NO (lets BIOS controls the GP) - * External Monochrome Card Support(12) 0, NO - * Controller Priority Select(11) 1, Primary - * Display Select(10:8) 0x0, CRT - * Graphics Memory Size(7:1) CONFIG_VIDEO_MB >> 1, - * defined in devicetree.cb - * PLL Reference Clock Bypass(0) 0, Default - */ - - /* Video RAM has to be given in 2MB chunks - * the value is read @ 7:1 (value in 7:0 looks like /2) - * so we can add the real value in megabytes - */ - - wData = VG_CFG_DRIVER | VG_CFG_PRIORITY | - VG_CFG_DSCRT | (CONFIG_VIDEO_MB & VG_MEM_MASK); - vrWrite(wClassIndex, wData); - - res = vrRead(wClassIndex); - printk(BIOS_DEBUG, "VRC_VG value: 0x%04x\n", res); -} diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c deleted file mode 100644 index ffaaa19..0000000 --- a/src/northbridge/amd/lx/northbridge.c +++ /dev/null @@ -1,425 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <stdint.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <stdlib.h> -#include <string.h> -#include <cpu/cpu.h> -#include <cpu/amd/lxdef.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/cache.h> -#include <cpu/amd/vr.h> -#include "northbridge.h" -#include <southbridge/amd/cs5536/cs5536.h> - - -/* here is programming for the various MSRs.*/ -#define IM_QWAIT 0x100000 - -#define DMCF_WRITE_SERIALIZE_REQUEST (2<<12) /* 2 outstanding */ /* in high */ -#define DMCF_SERIAL_LOAD_MISSES (2) /* enabled */ - -/* these are the 8-bit attributes for controlling RCONF registers */ -#define CACHE_DISABLE (1<<0) -#define WRITE_ALLOCATE (1<<1) -#define WRITE_PROTECT (1<<2) -#define WRITE_THROUGH (1<<3) -#define WRITE_COMBINE (1<<4) -#define WRITE_SERIALIZE (1<<5) - -/* RAM has none of this stuff */ -#define RAM_PROPERTIES (0) -#define DEVICE_PROPERTIES (WRITE_SERIALIZE|CACHE_DISABLE) -#define ROM_PROPERTIES (WRITE_SERIALIZE|WRITE_PROTECT|CACHE_DISABLE) -#define MSR_WS_CD_DEFAULT (0x21212121) - -/* 1810-1817 give you 8 registers with which to program protection regions */ -/* the are region configuration range registers, or RRCF */ -/* in msr terms, the are a straight base, top address assign, since they are 4k aligned. */ -/* so no left-shift needed for top or base */ -#define RRCF_LOW(base,properties) (base|(1<<8)|properties) -#define RRCF_LOW_CD(base) RRCF_LOW(base, CACHE_DISABLE) - -/* build initializer for P2D MSR */ -#define P2D_BM(msr, pdid1, bizarro, pbase, pmask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(pbase>>24), .lo=(pbase<<8)|pmask}} -#define P2D_BMO(msr, pdid1, bizarro, poffset, pbase, pmask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pbase>>24), .lo=(pbase<<8)|pmask}} -#define P2D_R(msr, pdid1, bizarro, pmax, pmin) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(pmax>>12), .lo=(pmax<<20)|pmin}} -#define P2D_RO(msr, pdid1, bizarro, poffset, pmax, pmin) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(poffset<<8)|(pmax>>12), .lo=(pmax<<20)|pmin}} -#define P2D_SC(msr, pdid1, bizarro, wen, ren,pscbase) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(wen), .lo=(ren<<16)|(pscbase>>18)}} -#define IOD_BM(msr, pdid1, bizarro, ibase, imask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(ibase>>12), .lo=(ibase<<20)|imask}} -#define IOD_SC(msr, pdid1, bizarro, en, wen, ren, ibase) {msr, {.hi=(pdid1<<29)|(bizarro<<28), .lo=(en<<24)|(wen<<21)|(ren<<20)|(ibase<<3)}} - -void print_conf(void); -void graphics_init(void); -void do_vsmbios(void); - -struct msr_defaults { - int msr_no; - msr_t msr; -} msr_defaults[] = { - { - 0x1700, { - .hi = 0,.lo = IM_QWAIT}}, { - 0x1800, { - .hi = DMCF_WRITE_SERIALIZE_REQUEST,.lo = - DMCF_SERIAL_LOAD_MISSES}}, - /* 1808 will be done down below, so we have to do 180a->1817 (well, 1813 really) */ - /* for 180a, for now, we assume VSM will configure it */ - /* 180b is left at reset value,a0000-bffff is non-cacheable */ - /* 180c, c0000-dffff is set to write serialize and non-cachable */ - /* oops, 180c will be set by CPU bug handling in cpubug.c */ - //{0x180c, {.hi = MSR_WS_CD_DEFAULT, .lo = MSR_WS_CD_DEFAULT}}, - /* 180d is left at default, e0000-fffff is non-cached */ - /* we will assume 180e, the ssm region configuration, is left at default or set by VSM */ - /* we will not set 0x180f, the DMM,yet */ - //{0x1810, {.hi = 0xee7ff000, .lo = RRCF_LOW(0xee000000, WRITE_COMBINE|CACHE_DISABLE)}}, - //{0x1811, {.hi = 0xefffb000, .lo = RRCF_LOW_CD(0xefff8000)}}, - //{0x1812, {.hi = 0xefff7000, .lo = RRCF_LOW_CD(0xefff4000)}}, - //{0x1813, {.hi = 0xefff3000, .lo = RRCF_LOW_CD(0xefff0000)}}, - /* now for GLPCI routing */ - /* GLIU0 */ - P2D_BM(MSR_GLIU0_BASE1, 0x1, 0x0, 0x0, 0xfff80), - P2D_BM(MSR_GLIU0_BASE2, 0x1, 0x0, 0x80000, 0xfffe0), - P2D_SC(MSR_GLIU0_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000), - /* GLIU1 */ - P2D_BM(MSR_GLIU1_BASE1, 0x1, 0x0, 0x0, 0xfff80), - P2D_BM(MSR_GLIU1_BASE2, 0x1, 0x0, 0x80000, 0xfffe0), - P2D_SC(MSR_GLIU1_SHADOW, 0x1, 0x0, 0x0, 0xff03, 0xC0000), { - 0} -}; - -/* Print the platform configuration - do before PCI init or it will not - * work right. - */ -void print_conf(void) -{ -#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR - int i; - unsigned long iol; - msr_t msr; - - int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0, - CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, - CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM, - GLCP_DELAY_CONTROLS, GL_END - }; - - int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, - MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6, - GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM, - GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, - MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, - GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, - GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5, - GLIU0_GLD_MSR_COH, GL_END - }; - - int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, - MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, - MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, - MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0, - GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW, - GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0, - GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3, - GLIU1_GLD_MSR_COH, GL_END - }; - - int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, - CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END - }; - - int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, - MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, - MDD_IRQM_PRIM, GL_END - }; - - int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, - GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, - GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END - }; - - int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, - MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6, - MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END - }; - - printk(BIOS_DEBUG, "---------- CPU ------------\n"); - - for (i = 0; cpu_msr_defs[i] != GL_END; i++) { - msr = rdmsr(cpu_msr_defs[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", - cpu_msr_defs[i], msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- GLIU 0 ------------\n"); - - for (i = 0; gliu0_msr_defs[i] != GL_END; i++) { - msr = rdmsr(gliu0_msr_defs[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", - gliu0_msr_defs[i], msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- GLIU 1 ------------\n"); - - for (i = 0; gliu1_msr_defs[i] != GL_END; i++) { - msr = rdmsr(gliu1_msr_defs[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", - gliu1_msr_defs[i], msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- RCONF ------------\n"); - - for (i = 0; rconf_msr[i] != GL_END; i++) { - msr = rdmsr(rconf_msr[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], - msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- VARIA ------------\n"); - msr = rdmsr(0x51300010); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, - msr.lo); - - msr = rdmsr(0x51400015); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, - msr.lo); - - printk(BIOS_DEBUG, "---------- DIVIL IRQ ------------\n"); - msr = rdmsr(MDD_IRQM_YLOW); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, - msr.lo); - msr = rdmsr(MDD_IRQM_YHIGH); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, - msr.hi, msr.lo); - msr = rdmsr(MDD_IRQM_ZLOW); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, - msr.lo); - msr = rdmsr(MDD_IRQM_ZHIGH); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, - msr.hi, msr.lo); - - printk(BIOS_DEBUG, "---------- PCI ------------\n"); - - for (i = 0; pci_msr[i] != GL_END; i++) { - msr = rdmsr(pci_msr[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], - msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- LPC/UART DMA ------------\n"); - - for (i = 0; dma_msr[i] != GL_END; i++) { - msr = rdmsr(dma_msr[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], - msr.hi, msr.lo); - } - - printk(BIOS_DEBUG, "---------- CS5536 ------------\n"); - - for (i = 0; cs5536_msr[i] != GL_END; i++) { - msr = rdmsr(cs5536_msr[i]); - printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], - msr.hi, msr.lo); - } - - iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE); - printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", - GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol); - iol = inl(GPIOL_EVENTS_ENABLE); - printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", - GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol); - iol = inl(GPIOL_INPUT_INVERT_ENABLE); - printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", - GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol); - iol = inl(GPIO_MAPPER_X); - printk(BIOS_DEBUG, "IOR 0x%08X is now 0x%08lX\n", GPIO_IO_BASE + GPIO_MAPPER_X, - iol); -#endif //CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR -} - -/* todo: add a resource record. We don't do this here because this may be called when - * very little of the platform is actually working. - */ -int sizeram(void) -{ - msr_t msr; - int sizem = 0; - unsigned short dimm; - - /* Get the RAM size from the memory controller as calculated and set by auto_size_dimm() */ - msr = rdmsr(MC_CF07_DATA); - printk(BIOS_DEBUG, "sizeram: _MSR MC_CF07_DATA: %08x:%08x\n", msr.hi, msr.lo); - - /* dimm 0 */ - dimm = msr.hi; - /* installed? */ - if ((dimm & 7) != 7) { - sizem = 4 << ((dimm >> 12) & 0x0F); /* 1:8MB, 2:16MB, 3:32MB, 4:64MB, ... 7:512MB, 8:1GB */ - } - - /* dimm 1 */ - dimm = msr.hi >> 16; - /* installed? */ - if ((dimm & 7) != 7) { - sizem += 4 << ((dimm >> 12) & 0x0F); /* 1:8MB, 2:16MB, 3:32MB, 4:64MB, ... 7:512MB, 8:1GB */ - } - - printk(BIOS_DEBUG, "sizeram: sizem 0x%xMB\n", sizem); - return sizem; -} - -static void enable_shadow(struct device *dev) -{ -} - -static void northbridge_init(struct device *dev) -{ - - printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); - - enable_shadow(dev); - -} - -static void northbridge_set_resources(struct device *dev) -{ - uint8_t line; - - struct bus *bus; - for (bus = dev->link_list; bus; bus = bus->next) { - if (bus->children) { - printk(BIOS_DEBUG, "my_dev_set_resources: assign_resources %d\n", - bus->secondary); - assign_resources(bus); - } - } - - /* set a default latency timer */ - pci_write_config8(dev, PCI_LATENCY_TIMER, 0x40); - - /* set a default secondary latency timer */ - if ((dev->hdr_type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) { - pci_write_config8(dev, PCI_SEC_LATENCY_TIMER, 0x40); - } - - /* zero the irq settings */ - line = pci_read_config8(dev, PCI_INTERRUPT_PIN); - if (line) { - pci_write_config8(dev, PCI_INTERRUPT_LINE, 0); - } - - /* set the cache line size, so far 64 bytes is good for everyone */ - pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 64 >> 2); -} - -static struct device_operations northbridge_operations = { - .read_resources = pci_dev_read_resources, - .set_resources = northbridge_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = northbridge_init, - .enable = 0, - .ops_pci = 0, -}; - -static const struct pci_driver northbridge_driver __pci_driver = { - .ops = &northbridge_operations, - .vendor = PCI_VENDOR_ID_AMD, - .device = PCI_DEVICE_ID_AMD_LXBRIDGE, -}; - -#include <cbmem.h> - -static void pci_domain_set_resources(struct device *dev) -{ - int idx; - u32 tomk; - struct device *mc_dev; - - printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); - - mc_dev = dev->link_list->children; - if (mc_dev) { - tomk = restore_top_of_low_cacheable() / 1024; - /* Report the memory regions - All memory up to systop except 0xa0000-0xbffff */ - idx = 10; - ram_resource(dev, idx++, 0, 640); - ram_resource(dev, idx++, 768, tomk - 768); // Systop - 0xc0000 -> KB - - set_late_cbmem_top(tomk * 1024); - } - - assign_resources(dev->link_list); -} - -static void pci_domain_enable(struct device *dev) -{ - printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); - - // do this here for now -- this chip really breaks our device model - northbridge_init_early(); - cpubug(); - chipsetinit(); - - do_vsmbios(); // do the magic stuff here, so prepare your tambourine;) - - graphics_init(); -} - -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = NULL, - .scan_bus = pci_domain_scan_bus, - .enable = pci_domain_enable, -}; - -static void cpu_bus_init(struct device *dev) -{ - printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__); - - initialize_cpus(dev->link_list); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = cpu_bus_init, - .scan_bus = 0, -}; - -static void enable_dev(struct device *dev) -{ - printk(BIOS_SPEW, ">> Entering northbridge.c: %s with path %d\n", - __func__, dev->path.type); - - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) - dev->ops = &pci_domain_ops; - else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) - dev->ops = &cpu_bus_ops; -} - -struct chip_operations northbridge_amd_lx_ops = { - CHIP_NAME("AMD LX Northbridge") - .enable_dev = enable_dev, -}; diff --git a/src/northbridge/amd/lx/northbridge.h b/src/northbridge/amd/lx/northbridge.h deleted file mode 100644 index 51c2c14..0000000 --- a/src/northbridge/amd/lx/northbridge.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef NORTHBRIDGE_AMD_LX_H -#define NORTHBRIDGE_AMD_LX_H - -/* northbridge.c */ -int sizeram(void); - -/* northbridgeinit.c */ -void northbridge_init_early(void); - -/* pll_reset.c */ -unsigned int GeodeLinkSpeed(void); -void lx_pll_reset(void); - -void lx_msr_init(void); - -#endif diff --git a/src/northbridge/amd/lx/northbridgeinit.c b/src/northbridge/amd/lx/northbridgeinit.c deleted file mode 100644 index 9655c0e..0000000 --- a/src/northbridge/amd/lx/northbridgeinit.c +++ /dev/null @@ -1,754 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/io.h> -#include <stdint.h> -#include <device/device.h> -#include <device/pci.h> -#include <stdlib.h> -#include <string.h> -#include "northbridge.h" -#include <cpu/amd/lxdef.h> -#include <cpu/x86/msr.h> -#include <cpu/x86/cache.h> -#include <cbmem.h> - -struct gliutable { - unsigned long desc_name; - unsigned short desc_type; - unsigned long hi, lo; -}; - -struct gliutable gliu0table[] = { - {.desc_name = MSR_GLIU0_BASE1,.desc_type = BM,.hi = MSR_MC + 0x0,.lo = 0x0FFF80}, /* 0-7FFFF to MC */ - {.desc_name = MSR_GLIU0_BASE2,.desc_type = BM,.hi = MSR_MC + 0x0,.lo = (0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */ - {.desc_name = MSR_GLIU0_SHADOW,.desc_type = SC_SHADOW,.hi = MSR_MC + 0x0,.lo = 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */ - {.desc_name = MSR_GLIU0_SYSMEM,.desc_type = R_SYSMEM,.hi = MSR_MC,.lo = 0x0}, /* Catch and fix dynamicly. */ - {.desc_name = MSR_GLIU0_SMM,.desc_type = BMO_SMM,.hi = MSR_MC,.lo = 0x0}, /* Catch and fix dynamicly. */ - {.desc_name = GLIU0_GLD_MSR_COH,.desc_type = OTHER,.hi = 0x0,.lo = - GL0_CPU}, - {.desc_name = GL_END,.desc_type = GL_END,.hi = 0x0,.lo = 0x0}, -}; - -struct gliutable gliu1table[] = { - {.desc_name = MSR_GLIU1_BASE1,.desc_type = BM,.hi = MSR_GL0 + 0x0,.lo = 0x0FFF80}, /* 0-7FFFF to MC */ - {.desc_name = MSR_GLIU1_BASE2,.desc_type = BM,.hi = MSR_GL0 + 0x0,.lo = (0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */ - {.desc_name = MSR_GLIU1_SHADOW,.desc_type = SC_SHADOW,.hi = MSR_GL0 + 0x0,.lo = 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */ - {.desc_name = MSR_GLIU1_SYSMEM,.desc_type = R_SYSMEM,.hi = MSR_GL0,.lo = 0x0}, /* Catch and fix dynamicly. */ - {.desc_name = MSR_GLIU1_SMM,.desc_type = BM_SMM,.hi = MSR_GL0,.lo = 0x0}, /* Catch and fix dynamicly. */ - {.desc_name = GLIU1_GLD_MSR_COH,.desc_type = OTHER,.hi = 0x0,.lo = - GL1_GLIU0}, - {.desc_name = MSR_GLIU1_FPU_TRAP,.desc_type = SCIO,.hi = (GL1_GLCP << 29) + 0x0,.lo = 0x033000F0}, /* FooGlue FPU 0xF0 */ - {.desc_name = GL_END,.desc_type = GL_END,.hi = 0x0,.lo = 0x0}, -}; - -struct gliutable *gliutables[] = { gliu0table, gliu1table, 0 }; - -struct msrinit { - unsigned long msrnum; - msr_t msr; -}; - -struct msrinit ClockGatingDefault[] = { - {GLIU0_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}}, - {MC_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0001}}, - {VG_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}}, - {GP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0001}}, - {DF_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0555}}, - {GLIU1_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}}, - {GLCP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0014}}, - {GLPCI_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}}, - {VIP_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0005}}, - {AES_GLD_MSR_PM, {.hi = 0x00,.lo = 0x0015}}, - {CPU_BC_PMODE_MSR, {.hi = 0x00,.lo = 0x70303}}, - {0xffffffff, {0xffffffff, 0xffffffff}}, -}; - -/* */ -/* SET GeodeLink PRIORITY*/ -/* */ -struct msrinit GeodeLinkPriorityTable[] = { - {CPU_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0220}}, - {DF_GLD_MSR_MASTER_CONF, {.hi = 0x00,.lo = 0x0000}}, - {VG_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0720}}, - {GP_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0010}}, - {GLPCI_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0017}}, - {GLCP_GLD_MSR_CONF, {.hi = 0x00,.lo = 0x0001}}, - {VIP_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0622}}, - {AES_GLD_MSR_CONFIG, {.hi = 0x00,.lo = 0x0013}}, - {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END */ -}; - - -static void writeglmsr(struct gliutable *gl) -{ - msr_t msr; - - msr.lo = gl->lo; - msr.hi = gl->hi; - wrmsr(gl->desc_name, msr); // MSR - see table above - printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo); // GX3 -} - -static void ShadowInit(struct gliutable *gl) -{ - msr_t msr; - - msr = rdmsr(gl->desc_name); - - if (msr.lo == 0) { - writeglmsr(gl); - } -} - -static void SysmemInit(struct gliutable *gl) -{ - msr_t msr; - int sizembytes, sizebytes; - - /* - * Figure out how much RAM is in the machine and allocate all to the - * system. We will adjust for SMM now and Frame Buffer later. - */ - sizembytes = sizeram(); - printk(BIOS_DEBUG, "%s: enable for %dMBytes\n", __func__, sizembytes); - sizebytes = sizembytes << 20; - - sizebytes -= ((SMM_SIZE * 1024) + 1); - printk(BIOS_DEBUG, "usable RAM: %d bytes\n", sizebytes); - - /* 20 bit address The bottom 12 bits go into bits 20-31 in msr.lo - The top 8 bits go into 0-7 of msr.hi. */ - sizebytes--; - msr.hi = (gl->hi & 0xFFFFFF00) | (sizebytes >> 24); - sizebytes <<= 8; /* move bits 23:12 in bits 31:20. */ - sizebytes &= 0xfff00000; - sizebytes |= 0x100; /* start at 1MB */ - msr.lo = sizebytes; - - wrmsr(gl->desc_name, msr); // MSR - see table above - printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, - gl->desc_name, msr.hi, msr.lo); -} - -static void SMMGL0Init(struct gliutable *gl) -{ - msr_t msr; - int sizebytes = sizeram() << 20; - long offset; - - sizebytes -= (SMM_SIZE * 1024); - - printk(BIOS_DEBUG, "%s: %d bytes\n", __func__, sizebytes); - - /* calculate the Two's complement offset */ - offset = sizebytes - SMM_OFFSET; - offset = (offset >> 12) & 0x000fffff; - printk(BIOS_DEBUG, "%s: offset is 0x%08x\n", __func__, SMM_OFFSET); - - msr.hi = offset << 8 | gl->hi; - msr.hi |= SMM_OFFSET >> 24; - - msr.lo = (SMM_OFFSET & 0x00ffffff) << 8; - msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff; - - wrmsr(gl->desc_name, msr); // MSR - See table above - printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, - gl->desc_name, msr.hi, msr.lo); -} - -static void SMMGL1Init(struct gliutable *gl) -{ - msr_t msr; - printk(BIOS_DEBUG, "%s:\n", __func__); - - msr.hi = gl->hi; - /* I don't think this is needed */ - msr.hi &= 0xffffff00; - msr.hi |= (SMM_OFFSET >> 24); - msr.lo = (SMM_OFFSET & 0x00fff000) << 8; - msr.lo |= ((~(SMM_SIZE * 1024) + 1) >> 12) & 0xfffff; - - wrmsr(gl->desc_name, msr); // MSR - See table above - printk(BIOS_DEBUG, "%s: MSR 0x%08lx, val 0x%08x:0x%08x\n", __func__, - gl->desc_name, msr.hi, msr.lo); -} - -static void GLIUInit(struct gliutable *gl) -{ - - while (gl->desc_type != GL_END) { - switch (gl->desc_type) { - default: - /* For Unknown types: Write then read MSR */ - writeglmsr(gl); - case SC_SHADOW: /* Check for a Shadow entry */ - ShadowInit(gl); - break; - - case R_SYSMEM: /* check for a SYSMEM entry */ - SysmemInit(gl); - break; - - case BMO_SMM: /* check for a SMM entry */ - SMMGL0Init(gl); - break; - - case BM_SMM: /* check for a SMM entry */ - SMMGL1Init(gl); - break; - } - gl++; - } - -} - - /* ************************************************************************** */ - /* * */ - /* * GLPCIInit */ - /* * */ - /* * Set up GLPCI settings for reads/write into memory */ - /* * R0: 0-640KB, */ - /* * R1: 1MB - Top of System Memory */ - /* * R2: SMM Memory */ - /* * R3: Framebuffer? - not set up yet */ - /* * R4: ?? */ - /* * */ - /* * Entry: */ - /* * Exit: */ - /* * Modified: */ - /* * */ - /* ************************************************************************** */ -static void GLPCIInit(void) -{ - struct gliutable *gl = NULL; - int i; - msr_t msr; - int msrnum, enable_preempt, enable_cpu_override; - int nic_grants_control, enable_bus_parking; - - /* */ - /* R0 - GLPCI settings for Conventional Memory space. */ - /* */ - msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */ - msr.lo = 0; /* 0 */ - msr.lo |= - GLPCI_RC_LOWER_EN_SET + GLPCI_RC_LOWER_PF_SET + - GLPCI_RC_LOWER_WC_SET; - msrnum = GLPCI_RC0; - wrmsr(msrnum, msr); - - /* */ - /* R1 - GLPCI settings for SysMem space. */ - /* */ - /* Get systop from GLIU0 SYSTOP Descriptor */ - for (i = 0; gliu0table[i].desc_name != GL_END; i++) { - if (gliu0table[i].desc_type == R_SYSMEM) { - gl = &gliu0table[i]; - break; - } - } - if (gl) { - unsigned long pah, pal; - msrnum = gl->desc_name; - msr = rdmsr(msrnum); - /* example R_SYSMEM value: 20:00:00:0f:fb:f0:01:00 - * translates to a base of 0x00100000 and top of 0xffbf0000 - * base of 1M and top of around 256M - */ - /* we have to create a page-aligned (4KB page) address for base and top */ - /* So we need a high page aligned address (pah) and low page aligned address (pal) - * pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12 - */ - pah = ((msr.hi & 0xFF) << 12) | ((msr.lo >> 20) & 0xFFF); - /* we have the page address. Now make it a page-aligned address */ - pah <<= 12; - - pal = msr.lo << 12; - msr.hi = pah; - msr.lo = pal; - msr.lo |= - GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET | - GLPCI_RC_LOWER_WC_SET; - printk(BIOS_DEBUG, "GLPCI R1: system msr.lo 0x%08x msr.hi 0x%08x\n", - msr.lo, msr.hi); - msrnum = GLPCI_RC1; - wrmsr(msrnum, msr); - } - - /* */ - /* R2 - GLPCI settings for SMM space */ - /* */ - msr.hi = - ((SMM_OFFSET + - (SMM_SIZE * 1024 - 1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; - msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT; - msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET; - printk(BIOS_DEBUG, "GLPCI R2: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, - msr.hi); - msrnum = GLPCI_RC2; - wrmsr(msrnum, msr); - - /* this is done elsewhere already, but it does no harm to do it more than once */ - /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility. */ - msr.lo = 0x021212121; /* cache disabled and write serialized */ - msr.hi = 0x021212121; /* cache disabled and write serialized */ - - msrnum = CPU_RCONF_A0_BF; - wrmsr(msrnum, msr); - - msrnum = CPU_RCONF_C0_DF; - wrmsr(msrnum, msr); - - msrnum = CPU_RCONF_E0_FF; - wrmsr(msrnum, msr); - - /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup. */ - msrnum = GLPCI_A0_BF; - msr.hi = 0x35353535; - msr.lo = 0x35353535; - wrmsr(msrnum, msr); - - msrnum = GLPCI_C0_DF; - msr.hi = 0x35353535; - msr.lo = 0x35353535; - wrmsr(msrnum, msr); - - msrnum = GLPCI_E0_FF; - msr.hi = 0x35353535; - msr.lo = 0x35353535; - wrmsr(msrnum, msr); - - /* Set WSREQ */ - msrnum = CPU_DM_CONFIG0; - msr = rdmsr(msrnum); - msr.hi &= ~(7 << DM_CONFIG0_UPPER_WSREQ_SHIFT); - msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT; /* reduce to 1 for safe mode */ - wrmsr(msrnum, msr); - - /* we are ignoring the 5530 case for now, and perhaps forever. */ - - /* */ - /* 553x NB Init */ - /* */ - - /* Arbiter setup */ - enable_preempt = - GLPCI_ARB_LOWER_PRE0_SET | GLPCI_ARB_LOWER_PRE1_SET | - GLPCI_ARB_LOWER_PRE2_SET | GLPCI_ARB_LOWER_CPRE_SET; - enable_cpu_override = GLPCI_ARB_LOWER_COV_SET; - enable_bus_parking = GLPCI_ARB_LOWER_PARK_SET; - nic_grants_control = - (0x4 << GLPCI_ARB_UPPER_R2_SHIFT) | (0x3 << - GLPCI_ARB_UPPER_H2_SHIFT); - - msrnum = GLPCI_ARB; - msr = rdmsr(msrnum); - - msr.hi |= nic_grants_control; - msr.lo |= enable_cpu_override | enable_preempt | enable_bus_parking; - wrmsr(msrnum, msr); - - msrnum = GLPCI_CTRL; - msr = rdmsr(msrnum); - - msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */ - msr.lo |= GLPCI_CTRL_LOWER_LDE_SET; - - msr.lo &= ~(0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT); - msr.lo |= 0x02 << GLPCI_CTRL_LOWER_IRFC_SHIFT; - - msr.lo &= ~(0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT); - msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT; - - msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT); - msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT; - - msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT); - msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT; - - msr.hi &= ~(0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT); - msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT; - - msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT); - msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT; - - msr.hi &= ~(0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT); - msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT; - wrmsr(msrnum, msr); - - /* Set GLPCI Latency Timer */ - msrnum = GLPCI_CTRL; - msr = rdmsr(msrnum); - msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone */ - wrmsr(msrnum, msr); - - /* GLPCI_SPARE */ - msrnum = GLPCI_SPARE; - msr = rdmsr(msrnum); - msr.lo &= ~0x7; - msr.lo |= - GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | - GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | - GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET; - wrmsr(msrnum, msr); -} - - /* ************************************************************************** */ - /* * */ - /* * ClockGatingInit */ - /* * */ - /* * Enable Clock Gating. */ - /* * */ - /* * Entry: */ - /* * Exit: */ - /* * Modified: */ - /* * */ - /* ************************************************************************** */ -static void ClockGatingInit(void) -{ - msr_t msr; - struct msrinit *gating = ClockGatingDefault; - int i; - - for (i = 0; gating->msrnum != 0xffffffff; i++) { - msr = rdmsr(gating->msrnum); - msr.hi |= gating->msr.hi; - msr.lo |= gating->msr.lo; - /* printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, - gating->msrnum, msr.hi, msr.lo); */// GX3 - wrmsr(gating->msrnum, msr); // MSR - See the table above - gating += 1; - } - -} - -static void GeodeLinkPriority(void) -{ - msr_t msr; - struct msrinit *prio = GeodeLinkPriorityTable; - int i; - - for (i = 0; prio->msrnum != 0xffffffff; i++) { - msr = rdmsr(prio->msrnum); - msr.hi |= prio->msr.hi; - msr.lo &= ~0xfff; - msr.lo |= prio->msr.lo; - /* printk(BIOS_DEBUG, "%s: MSR 0x%08x will be set to 0x%08x:0x%08x\n", __func__, - prio->msrnum, msr.hi, msr.lo); */// GX3 - wrmsr(prio->msrnum, msr); // MSR - See the table above - prio += 1; - } -} - -/* - * Get the GLIU0 shadow register settings - * If the setShadow function is used then all shadow descriptors - * will stay sync'ed. - */ -static uint64_t getShadow(void) -{ - msr_t msr; - - msr = rdmsr(MSR_GLIU0_SHADOW); - return (((uint64_t) msr.hi) << 32) | msr.lo; -} - -/* - * Set the cache RConf registers for the memory hole. - * Keeps all cache shadow descriptors sync'ed. - * This is part of the PCI lockup solution - * Entry: EDX:EAX is the shadow settings - */ -static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo) -{ - - // ok this is whacky bit translation time. - int bit; - uint8_t shadowByte; - msr_t msr = { 0, 0 }; - shadowByte = (uint8_t) (shadowLo >> 16); - - // load up D000 settings in edx. - for (bit = 7; bit >= 4; bit--) { - msr.hi <<= 8; - msr.hi |= 1; // cache disable PCI/Shadow memory - if (shadowByte & (1 << bit)) - msr.hi |= 0x20; // write serialize PCI memory - } - - // load up C000 settings in eax. - for (; bit >= 0; bit--) { - msr.lo <<= 8; - msr.lo |= 1; // cache disable PCI/Shadow memory - if (shadowByte & (1 << bit)) - msr.lo |= 0x20; // write serialize PCI memory - } - - wrmsr(CPU_RCONF_C0_DF, msr); - - shadowByte = (uint8_t) (shadowLo >> 24); - - // load up F000 settings in edx. - for (bit = 7; bit >= 4; bit--) { - msr.hi <<= 8; - msr.hi |= 1; // cache disable PCI/Shadow memory - if (shadowByte & (1 << bit)) - msr.hi |= 0x20; // write serialize PCI memory - } - - // load up E000 settings in eax. - for (; bit >= 0; bit--) { - msr.lo <<= 8; - msr.lo |= 1; // cache disable PCI/Shadow memory - if (shadowByte & (1 << bit)) - msr.lo |= 0x20; // write serialize PCI memory - } - - wrmsr(CPU_RCONF_E0_FF, msr); -} - -/* - * Set the GLPCI registers for the memory hole. - * Keeps all cache shadow descriptors sync'ed. - * Entry: EDX:EAX is the shadow settings - */ -static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo) -{ - msr_t msr; - -// Set the Enable Register. - msr = rdmsr(GLPCI_REN); - msr.lo &= 0xFFFF00FF; - msr.lo |= ((shadowLo & 0xFFFF0000) >> 8); - wrmsr(GLPCI_REN, msr); -} - -/* - * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW. - * Keeps all shadow descriptors sync'ed. - * Entry: EDX:EAX is the shadow settings - */ -static void setShadow(uint64_t shadowSettings) -{ - int i; - msr_t msr; - struct gliutable *pTable; - uint32_t shadowLo, shadowHi; - - shadowLo = (uint32_t) shadowSettings; - shadowHi = (uint32_t) (shadowSettings >> 32); - - setShadowRCONF(shadowHi, shadowLo); - setShadowGLPCI(shadowHi, shadowLo); - - for (i = 0; gliutables[i]; i++) { - for (pTable = gliutables[i]; pTable->desc_type != GL_END; - pTable++) { - if (pTable->desc_type == SC_SHADOW) { - - msr = rdmsr(pTable->desc_name); - msr.lo = (uint32_t) shadowSettings; - msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX - msr.hi |= - ((uint32_t) (shadowSettings >> 32)) & - 0x0000FFFF; - wrmsr(pTable->desc_name, msr); // MSR - See the table above - } - } - } -} - -static void rom_shadow_settings(void) -{ - - uint64_t shadowSettings = getShadow(); - shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; // Disable read & writes - shadowSettings |= (uint64_t) 0x00000000F0000000ULL; // Enable reads for F0000-FFFFF - shadowSettings |= (uint64_t) 0x0000FFFFFFFF0000ULL; // Enable rw for C0000-CFFFF - setShadow(shadowSettings); -} - -/*************************************************************************** - * - * L1Init - * Set up RCONF_DEFAULT and any other RCONF registers needed - * - * DEVRC_RCONF_DEFAULT: - * ROMRC(63:56) = 04h ; write protect ROMBASE - * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of ROM chipselect area - * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst. - * SYSTOP(27:8) = top of system memory - * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough - * - ***************************************************************************/ -#define SYSMEM_RCONF_WRITETHROUGH 8 -#define DEVRC_RCONF_DEFAULT 0x21ul -#define ROMBASE_RCONF_DEFAULT 0xFFFC0000 -#define ROMRC_RCONF_DEFAULT 0x25 - -static void enable_L1_cache(void) -{ - struct gliutable *gl = NULL; - int i; - msr_t msr; - uint8_t SysMemCacheProp; - - /* Locate SYSMEM entry in GLIU0table */ - for (i = 0; gliu0table[i].desc_name != GL_END; i++) { - if (gliu0table[i].desc_type == R_SYSMEM) { - gl = &gliu0table[i]; - break; - } - } - if (gl == 0) { - post_code(0xCE); /* POST_RCONFInitError */ - while (1) ; - } -// sysdescfound: - msr = rdmsr(gl->desc_name); - - /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the - * top 8 bits go into 0-7 of edx. - */ - msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF); - msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF; - msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8 - - // Set Default SYSMEM region properties - msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // NOT writethrough == writeback 8 (or ~8) - - // Set PCI space cache properties - msr.hi = (DEVRC_RCONF_DEFAULT >> 4); // setting is split betwwen hi and lo... - msr.lo |= (DEVRC_RCONF_DEFAULT << 28); - - // Set the ROMBASE. This is usually FFFC0000h - msr.hi |= - (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT; - - // Set ROMBASE cache properties. - msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24)); - - // now program RCONF_DEFAULT - wrmsr(CPU_RCONF_DEFAULT, msr); - printk(BIOS_DEBUG, "CPU_RCONF_DEFAULT (1808): 0x%08X:0x%08X\n", msr.hi, - msr.lo); - - // RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. - // Set to match system memory cache properties. - msr = rdmsr(CPU_RCONF_DEFAULT); - SysMemCacheProp = (uint8_t) (msr.lo & 0xFF); - msr = rdmsr(CPU_RCONF_BYPASS); - msr.lo = - (msr.lo & 0xFFFF0000) | (SysMemCacheProp << 8) | SysMemCacheProp; - wrmsr(CPU_RCONF_BYPASS, msr); - - printk(BIOS_DEBUG, "CPU_RCONF_BYPASS (180A): 0x%08x : 0x%08x\n", msr.hi, - msr.lo); -} - -static void enable_L2_cache(void) -{ - msr_t msr; - - /* Instruction Memory Configuration register - * set EBE bit, required when L2 cache is enabled - */ - msr = rdmsr(CPU_IM_CONFIG); - msr.lo |= 0x400; - wrmsr(CPU_IM_CONFIG, msr); - - /* Data Memory Subsystem Configuration register - * set EVCTONRPL bit, required when L2 cache is enabled in victim mode - */ - msr = rdmsr(CPU_DM_CONFIG0); - msr.lo |= 0x4000; - wrmsr(CPU_DM_CONFIG0, msr); - - /* invalidate L2 cache */ - msr.hi = 0x00; - msr.lo = 0x10; - wrmsr(CPU_BC_L2_CONF, msr); - - /* Enable L2 cache */ - msr.hi = 0x00; - msr.lo = 0x0f; - wrmsr(CPU_BC_L2_CONF, msr); - - printk(BIOS_DEBUG, "L2 cache enabled\n"); -} - -static void setup_lx_cache(void) -{ - msr_t msr; - - enable_L1_cache(); - enable_L2_cache(); - - // Make sure all INVD instructions are treated as WBINVD. We do this - // because we've found some programs which require this behavior. - msr = rdmsr(CPU_DM_CONFIG0); - msr.lo |= DM_CONFIG0_LOWER_WBINVD_SET; - wrmsr(CPU_DM_CONFIG0, msr); - - x86_enable_cache(); - wbinvd(); -} - -uintptr_t restore_top_of_low_cacheable(void) -{ - uint32_t systop; - msr_t msr; - - msr = rdmsr(MSR_GLIU0_SYSMEM); - systop = ((msr.hi & 0xFF) << 24) | ((msr.lo & 0xFFF00000) >> 8); - systop += 0x1000; /* 4K */ - - return systop; -} - -/****************************************************************************/ -/* * northbridge_init_early */ -/* **/ -/* * Core Logic initialization: Host bridge*/ -/* **/ -/* ***************************************************************************/ -void northbridge_init_early(void) -{ - int i; - printk(BIOS_DEBUG, "Enter %s\n", __func__); - - for (i = 0; gliutables[i]; i++) - GLIUInit(gliutables[i]); - - /* Now that the descriptor to memory is set up. */ - /* The memory controller needs one read to synch its lines before it can be used. */ - read32(zeroptr); - - GeodeLinkPriority(); - - setup_lx_cache(); - - rom_shadow_settings(); - - GLPCIInit(); - - ClockGatingInit(); - - __asm__ __volatile__("FINIT\n"); - printk(BIOS_DEBUG, "Exit %s\n", __func__); -} diff --git a/src/northbridge/amd/lx/pll_reset.c b/src/northbridge/amd/lx/pll_reset.c deleted file mode 100644 index cb332ea..0000000 --- a/src/northbridge/amd/lx/pll_reset.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include "northbridge.h" - -void lx_pll_reset(void) -{ - msr_t msrGlcpSysRstpll; - - msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL); - - printk(BIOS_DEBUG, "MSR GLCP_SYS_RSTPLL (%08x) value is %08x:%08x\n", - GLCP_SYS_RSTPLL, msrGlcpSysRstpll.hi, msrGlcpSysRstpll.lo); - - post_code(POST_PLL_INIT); - - if (!(msrGlcpSysRstpll.lo & (1 << RSTPLL_LOWER_SWFLAGS_SHIFT))) { - printk(BIOS_DEBUG, "Configuring PLL.\n"); - if (CONFIG_PLL_MANUAL_CONFIG) { - post_code(POST_PLL_MANUAL); - /* CPU and GLIU mult/div (GLMC_CLK = GLIU_CLK / 2) */ - msrGlcpSysRstpll.hi = CONFIG_PLLMSRhi; - - /* Hold Count - how long we will sit in reset */ - msrGlcpSysRstpll.lo = CONFIG_PLLMSRlo; - } else { - /*automatic configuration (straps) */ - post_code(POST_PLL_STRAP); - msrGlcpSysRstpll.lo &= - ~(0xFF << RSTPPL_LOWER_HOLD_COUNT_SHIFT); - msrGlcpSysRstpll.lo |= - (0xDE << RSTPPL_LOWER_HOLD_COUNT_SHIFT); - msrGlcpSysRstpll.lo &= - ~(RSTPPL_LOWER_COREBYPASS_SET | - RSTPPL_LOWER_MBBYPASS_SET); - msrGlcpSysRstpll.lo |= - RSTPPL_LOWER_COREPD_SET | RSTPPL_LOWER_CLPD_SET; - } - /* Use SWFLAGS to remember: "we've already been here" */ - msrGlcpSysRstpll.lo |= (1 << RSTPLL_LOWER_SWFLAGS_SHIFT); - - /* "reset the chip" value */ - msrGlcpSysRstpll.lo |= RSTPPL_LOWER_CHIP_RESET_SET; - wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll); - - /* You should never get here..... The chip has reset. */ - post_code(POST_PLL_RESET_FAIL); - die("CONFIGURING PLL FAILURE\n"); - - } - printk(BIOS_DEBUG, "PLL configured.\n"); - return; -} - -unsigned int GeodeLinkSpeed(void) -{ - unsigned int speed; - msr_t msr; - - msr = rdmsr(GLCP_SYS_RSTPLL); - speed = ((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F) + 1) * 333) / 10; - if ((((((msr.hi >> RSTPLL_UPPER_GLMULT_SHIFT) & 0x1F) + 1) * 333) % 10) > 5) { - ++speed; - } - return (speed); -} diff --git a/src/northbridge/amd/lx/raminit.c b/src/northbridge/amd/lx/raminit.c deleted file mode 100644 index 8de85a3..0000000 --- a/src/northbridge/amd/lx/raminit.c +++ /dev/null @@ -1,775 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include <arch/io.h> -#include <spd.h> -#include <stddef.h> -#include <southbridge/amd/cs5536/cs5536.h> -#include "raminit.h" -#include "northbridge.h" - -static const unsigned char NumColAddr[] = { - 0x00, 0x10, 0x11, 0x00, 0x00, 0x00, 0x00, 0x07, - 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F -}; - -static void banner(const char *s) -{ - printk(BIOS_DEBUG, " * %s\n", s); -} - -static void __noreturn hcf(void) -{ - printk(BIOS_EMERG, "DIE\n"); - /* this guarantees we flush the UART fifos (if any) and also - * ensures that things, in general, keep going so no debug output - * is lost - */ - while (1) - printk(BIOS_EMERG, "%c", 0); -} - -static void auto_size_dimm(unsigned int dimm) -{ - uint32_t dimm_setting; - uint16_t dimm_size; - uint8_t spd_byte; - msr_t msr; - - dimm_setting = 0; - - banner("Check present"); - /* Check that we have a dimm */ - if (spd_read_byte(dimm, SPD_MEMORY_TYPE) == 0xFF) { - return; - } - - banner("MODBANKS"); - /* Field: Module Banks per DIMM */ - /* EEPROM byte usage: (5) Number of DIMM Banks */ - spd_byte = spd_read_byte(dimm, SPD_NUM_DIMM_BANKS); - if ((MIN_MOD_BANKS > spd_byte) || (spd_byte > MAX_MOD_BANKS)) { - printk(BIOS_EMERG, "Number of module banks not compatible\n"); - post_code(ERROR_BANK_SET); - hcf(); - } - dimm_setting |= (spd_byte >> 1) << CF07_UPPER_D0_MB_SHIFT; - banner("FIELDBANKS"); - - /* Field: Banks per SDRAM device */ - /* EEPROM byte usage: (17) Number of Banks on SDRAM Device */ - spd_byte = spd_read_byte(dimm, SPD_NUM_BANKS_PER_SDRAM); - if ((MIN_DEV_BANKS > spd_byte) || (spd_byte > MAX_DEV_BANKS)) { - printk(BIOS_EMERG, "Number of device banks not compatible\n"); - post_code(ERROR_BANK_SET); - hcf(); - } - dimm_setting |= (spd_byte >> 2) << CF07_UPPER_D0_CB_SHIFT; - banner("SPDNUMROWS"); - - /*; Field: DIMM size - *; EEPROM byte usage: (3) Number of Row Addresses - *; (4) Number of Column Addresses - *; (5) Number of DIMM Banks - *; (31) Module Bank Density - *; Size = Module Density * Module Banks - */ - if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0) - || (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) { - printk(BIOS_EMERG, "Assymetirc DIMM not compatible\n"); - post_code(ERROR_UNSUPPORTED_DIMM); - hcf(); - } - banner("SPDBANKDENSITY"); - - dimm_size = spd_read_byte(dimm, SPD_BANK_DENSITY); - banner("DIMMSIZE"); - dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out */ - dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top */ - - /* Module Density * Module Banks */ - dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */ - banner("BEFORT CTZ"); - dimm_size = __builtin_ctz(dimm_size); - banner("TEST DIMM SIZE > 8"); - if (dimm_size > 8) { /* 8 is 1GB only support 1GB per DIMM */ - printk(BIOS_EMERG, "Only support up to 1 GB per DIMM\n"); - post_code(ERROR_DENSITY_DIMM); - hcf(); - } - dimm_setting |= dimm_size << CF07_UPPER_D0_SZ_SHIFT; - banner("PAGESIZE"); - -/*; Field: PAGE size -*; EEPROM byte usage: (4) Number of Column Addresses -*; PageSize = 2^# Column Addresses * Data width in bytes (should be 8bytes for a normal DIMM) -* -*; But this really works by magic. -*;If ma[12:0] is the memory address pins, and pa[12:0] is the physical column address -*;that MC generates, here is how the MC assigns the pa onto the ma pins: -* -*;ma 12 11 10 09 08 07 06 05 04 03 02 01 00 -*;------------------------------------------- -*;pa 09 08 07 06 05 04 03 (7 col addr bits = 1K page size) -*;pa 10 09 08 07 06 05 04 03 (8 col addr bits = 2K page size) -*;pa 11 10 09 08 07 06 05 04 03 (9 col addr bits = 4K page size) -*;pa 12 11 10 09 08 07 06 05 04 03 (10 col addr bits = 8K page size) -*;pa 13 AP 12 11 10 09 08 07 06 05 04 03 (11 col addr bits = 16K page size) -*;pa 14 13 AP 12 11 10 09 08 07 06 05 04 03 (12 col addr bits = 32K page size) -*; *AP = autoprecharge bit -* -*;Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes), -*;so lower 3 address bits are dont_cares.So from the table above, -*;it's easier to see what the old code is doing: if for example,#col_addr_bits = 7(06h), -*;it adds 3 to get 10, then does 2^10 = 1K. Get it?*/ - - spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF]; - banner("MAXCOLADDR"); - if (spd_byte > MAX_COL_ADDR) { - printk(BIOS_EMERG, "DIMM page size not compatible\n"); - post_code(ERROR_SET_PAGE); - hcf(); - } - banner(">12address test"); - spd_byte -= 7; - if (spd_byte > 5) { /* if the value is above 6 it means > 12 address lines */ - spd_byte = 7; /* which means > 32k so set to disabled */ - } - dimm_setting |= spd_byte << CF07_UPPER_D0_PSZ_SHIFT; /* 0 = 1k, 1 = 2k, 2 = 4k, etc */ - - banner("RDMSR CF07"); - msr = rdmsr(MC_CF07_DATA); - banner("WRMSR CF07"); - if (dimm == DIMM0) { - msr.hi &= 0xFFFF0000; - msr.hi |= dimm_setting; - } else { - msr.hi &= 0x0000FFFF; - msr.hi |= dimm_setting << 16; - } - wrmsr(MC_CF07_DATA, msr); - banner("ALL DONE"); -} - -static void checkDDRMax(void) -{ - uint8_t spd_byte0, spd_byte1; - uint16_t speed; - - /* PC133 identifier */ - spd_byte0 = spd_read_byte(DIMM0, SPD_MIN_CYCLE_TIME_AT_CAS_MAX); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_MIN_CYCLE_TIME_AT_CAS_MAX); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - - /* I don't think you need this check. - if (spd_byte0 >= 0xA0 || spd_byte1 >= 0xA0) { - printk(BIOS_EMERG, "DIMM overclocked. Check GeodeLink Speed\n"); - post_code(POST_PLL_MEM_FAIL); - hcf(); - } */ - - /* Use the slowest DIMM */ - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - /* Turn SPD ns time into MHz. Check what the asm does to this math. */ - speed = 20000 / (((spd_byte0 >> 4) * 10) + (spd_byte0 & 0x0F)); - - /* current speed > max speed? */ - if (GeodeLinkSpeed() > speed) { - printk(BIOS_EMERG, "DIMM overclocked. Check GeodeLink Speed\n"); - post_code(POST_PLL_MEM_FAIL); - hcf(); - } -} - -const uint16_t REF_RATE[] = { 15, 3, 7, 31, 62, 125 }; /* ns */ - -static void set_refresh_rate(void) -{ - uint8_t spd_byte0, spd_byte1; - uint16_t rate0, rate1; - msr_t msr; - - spd_byte0 = spd_read_byte(DIMM0, SPD_REFRESH); - spd_byte0 &= 0xF; - if (spd_byte0 > 5) { - spd_byte0 = 5; - } - rate0 = REF_RATE[spd_byte0]; - - spd_byte1 = spd_read_byte(DIMM1, SPD_REFRESH); - spd_byte1 &= 0xF; - if (spd_byte1 > 5) { - spd_byte1 = 5; - } - rate1 = REF_RATE[spd_byte1]; - - /* Use the faster rate (lowest number) */ - if (rate0 > rate1) { - rate0 = rate1; - } - - msr = rdmsr(MC_CF07_DATA); - msr.lo |= ((rate0 * (GeodeLinkSpeed() / 2)) / 16) - << CF07_LOWER_REF_INT_SHIFT; - wrmsr(MC_CF07_DATA, msr); -} - -const uint8_t CASDDR[] = { 5, 5, 2, 6, 3, 7, 4, 0 }; /* 1(1.5), 1.5, 2, 2.5, 3, 3.5, 4, 0 */ - -static u8 getcasmap(u32 dimm, u16 glspeed) -{ - u16 dimm_speed; - u8 spd_byte, casmap, casmap_shift = 0; - - /************************** DIMM0 **********************************/ - casmap = spd_read_byte(dimm, SPD_ACCEPTABLE_CAS_LATENCIES); - if (casmap != 0xFF) { - /* IF -.5 timing is supported, check -.5 timing > GeodeLink */ - spd_byte = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_2ND); - if (spd_byte != 0) { - /* Turn SPD ns time into MHz. Check what the asm does to this math. */ - dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F)); - if (dimm_speed >= glspeed) { - casmap_shift = 1; /* -.5 is a shift of 1 */ - /* IF -1 timing is supported, check -1 timing > GeodeLink */ - spd_byte = spd_read_byte(dimm, SPD_SDRAM_CYCLE_TIME_3RD); - if (spd_byte != 0) { - /* Turn SPD ns time into MHz. Check what the asm does to this math. */ - dimm_speed = 20000 / (((spd_byte >> 4) * 10) + (spd_byte & 0x0F)); - if (dimm_speed >= glspeed) { - casmap_shift = 2; /* -1 is a shift of 2 */ - } - } /* SPD_SDRAM_CYCLE_TIME_3RD (-1) !=0 */ - } else { - casmap_shift = 0; - } - } /* SPD_SDRAM_CYCLE_TIME_2ND (-.5) !=0 */ - /* set the casmap based on the shift to limit possible CAS settings */ - spd_byte = 31 - __builtin_clz((uint32_t) casmap); - /* just want bits in the lower byte since we have to cast to a 32 */ - casmap &= 0xFF << (spd_byte - casmap_shift); - } else { /* No DIMM */ - casmap = 0; - } - return casmap; -} - -static void setCAS(void) -{ -/*;***************************************************************************** -;* -;* setCAS -;* EEPROM byte usage: (18) SDRAM device attributes - CAS latency -;* EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5 -;* EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1 -;* -;* The CAS setting is based on the information provided in each DIMMs SPD. -;* The speed at which a DIMM can run is described relative to the slowest -;* CAS the DIMM supports. Each speed for the relative CAS settings is -;* checked that it is within the GeodeLink speed. If it isn't within the GeodeLink -;* speed, the CAS setting is removed from the list of good settings for -;* the DIMM. This is done for both DIMMs and the lists are compared to -;* find the lowest common CAS latency setting. If there are no CAS settings -;* in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt. -;* -;* Entry: -;* Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information. -;* Destroys: We really use everything ! -;*****************************************************************************/ - uint16_t glspeed; - uint8_t spd_byte, casmap0, casmap1; - msr_t msr; - - glspeed = GeodeLinkSpeed(); - - casmap0 = getcasmap(DIMM0, glspeed); - casmap1 = getcasmap(DIMM1, glspeed); - - /********************* CAS_LAT MAP COMPARE ***************************/ - if (casmap0 == 0) { - spd_byte = CASDDR[__builtin_ctz(casmap1)]; - } else if (casmap1 == 0) { - spd_byte = CASDDR[__builtin_ctz(casmap0)]; - } else if ((casmap0 &= casmap1)) { - spd_byte = CASDDR[__builtin_ctz(casmap0)]; - } else { - printk(BIOS_EMERG, "DIMM CAS Latencies not compatible\n"); - post_code(ERROR_DIFF_DIMMS); - hcf(); - } - - msr = rdmsr(MC_CF8F_DATA); - msr.lo &= ~(7 << CF8F_LOWER_CAS_LAT_SHIFT); - msr.lo |= spd_byte << CF8F_LOWER_CAS_LAT_SHIFT; - wrmsr(MC_CF8F_DATA, msr); -} - -static void set_latencies(void) -{ - uint32_t memspeed, dimm_setting; - uint8_t spd_byte0, spd_byte1; - msr_t msr; - - memspeed = GeodeLinkSpeed() / 2; - dimm_setting = 0; - - /* MC_CF8F setup */ - /* tRAS */ - spd_byte0 = spd_read_byte(DIMM0, SPD_tRAS); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_tRAS); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - /* (ns/(1/MHz) = (us*MHz)/1000 = clocks/1000 = clocks) */ - spd_byte1 = (spd_byte0 * memspeed) / 1000; - if (((spd_byte0 * memspeed) % 1000)) { - ++spd_byte1; - } - dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2PRE_SHIFT; - - /* tRP */ - spd_byte0 = spd_read_byte(DIMM0, SPD_tRP); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_tRP); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - /* (ns/(1/MHz) = (us*MHz)/1000 = clocks/1000 = clocks) */ - spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000; - if ((((spd_byte0 >> 2) * memspeed) % 1000)) { - ++spd_byte1; - } - dimm_setting |= spd_byte1 << CF8F_LOWER_PRE2ACT_SHIFT; - - /* tRCD */ - spd_byte0 = spd_read_byte(DIMM0, SPD_tRCD); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_tRCD); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - /* (ns/(1/MHz) = (us*MHz)/1000 = clocks/1000 = clocks) */ - spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000; - if ((((spd_byte0 >> 2) * memspeed) % 1000)) { - ++spd_byte1; - } - dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2CMD_SHIFT; - - /* tRRD */ - spd_byte0 = spd_read_byte(DIMM0, SPD_tRRD); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_tRRD); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - /* (ns/(1/MHz) = (us*MHz)/1000 = clocks/1000 = clocks) */ - spd_byte1 = ((spd_byte0 >> 2) * memspeed) / 1000; - if ((((spd_byte0 >> 2) * memspeed) % 1000)) { - ++spd_byte1; - } - dimm_setting |= spd_byte1 << CF8F_LOWER_ACT2ACT_SHIFT; - - /* tRC = tRP + tRAS */ - dimm_setting |= (((dimm_setting >> CF8F_LOWER_ACT2PRE_SHIFT) & 0x0F) + - ((dimm_setting >> CF8F_LOWER_PRE2ACT_SHIFT) & 0x07)) - << CF8F_LOWER_ACT2ACTREF_SHIFT; - - msr = rdmsr(MC_CF8F_DATA); - msr.lo &= 0xF00000FF; - msr.lo |= dimm_setting; - msr.hi |= CF8F_UPPER_REORDER_DIS_SET; - wrmsr(MC_CF8F_DATA, msr); - - /* MC_CF1017 setup */ - /* tRFC */ - spd_byte0 = spd_read_byte(DIMM0, SPD_tRFC); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_tRFC); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - if (spd_byte0 < spd_byte1) { - spd_byte0 = spd_byte1; - } - - if (spd_byte0) { - /* (ns/(1/MHz) = (us*MHz)/1000 = clocks/1000 = clocks) */ - spd_byte1 = (spd_byte0 * memspeed) / 1000; - if (((spd_byte0 * memspeed) % 1000)) { - ++spd_byte1; - } - } else { /* Not all SPDs have tRFC setting. Use this formula tRFC = tRC + 1 clk */ - spd_byte1 = ((dimm_setting >> CF8F_LOWER_ACT2ACTREF_SHIFT) & 0x0F) + 1; - } - dimm_setting = spd_byte1 << CF1017_LOWER_REF2ACT_SHIFT; /* note this clears the cf8f dimm setting */ - msr = rdmsr(MC_CF1017_DATA); - msr.lo &= ~(0x1F << CF1017_LOWER_REF2ACT_SHIFT); - msr.lo |= dimm_setting; - wrmsr(MC_CF1017_DATA, msr); - - /* tWTR: Set tWTR to 2 for 400MHz and above GLBUS (200MHz mem) other wise it stay default(1) */ - if (memspeed > 198) { - msr = rdmsr(MC_CF1017_DATA); - msr.lo &= ~(0x7 << CF1017_LOWER_WR_TO_RD_SHIFT); - msr.lo |= 2 << CF1017_LOWER_WR_TO_RD_SHIFT; - wrmsr(MC_CF1017_DATA, msr); - } -} - -static void set_extended_mode_registers(void) -{ - uint8_t spd_byte0, spd_byte1; - msr_t msr; - spd_byte0 = spd_read_byte(DIMM0, SPD_DEVICE_ATTRIBUTES_GENERAL); - if (spd_byte0 == 0xFF) { - spd_byte0 = 0; - } - spd_byte1 = spd_read_byte(DIMM1, SPD_DEVICE_ATTRIBUTES_GENERAL); - if (spd_byte1 == 0xFF) { - spd_byte1 = 0; - } - spd_byte1 &= spd_byte0; - - msr = rdmsr(MC_CF07_DATA); - if (spd_byte1 & 1) { /* Drive Strength Control */ - msr.lo |= CF07_LOWER_EMR_DRV_SET; - } - if (spd_byte1 & 2) { /* FET Control */ - msr.lo |= CF07_LOWER_EMR_QFC_SET; - } - wrmsr(MC_CF07_DATA, msr); -} - -#undef TLA_MEMORY_DEBUG -#ifdef TLA_MEMORY_DEBUG -static void EnableMTest(void) -{ - msr_t msr; - - msr = rdmsr(GLCP_DELAY_CONTROLS); - msr.hi &= ~(7 << 20); /* clear bits 54:52 */ - if (GeodeLinkSpeed() < 200) { - msr.hi |= 2 << 20; - } - wrmsr(GLCP_DELAY_CONTROLS, msr); - - msr = rdmsr(MC_CFCLK_DBUG); - msr.hi |= - CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET | - CFCLK_UPPER_MTST_RBEX_EN_SET; - msr.lo |= CFCLK_LOWER_TRISTATE_DIS_SET; - wrmsr(MC_CFCLK_DBUG, msr); - - printk(BIOS_INFO, "Enabled MTest for TLA debug\n"); -} -#endif - -void sdram_set_registers(const struct mem_controller *ctrl) -{ - msr_t msr; - uint32_t msrnum; - - /* Set Timing Control */ - msrnum = MC_CF1017_DATA; - msr = rdmsr(msrnum); - msr.lo &= ~(7 << CF1017_LOWER_RD_TMG_CTL_SHIFT); - if (GeodeLinkSpeed() < 334) { - msr.lo |= (3 << CF1017_LOWER_RD_TMG_CTL_SHIFT); - } else { - msr.lo |= (4 << CF1017_LOWER_RD_TMG_CTL_SHIFT); - } - wrmsr(msrnum, msr); - - /* Set Refresh Staggering */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo &= ~0xF0; - msr.lo |= 0x40; /* set refresh to 4SDRAM clocks */ - wrmsr(msrnum, msr); - - /* Memory Interleave: Set HOI here otherwise default is LOI */ - /* msrnum = MC_CF8F_DATA; - msr = rdmsr(msrnum); - msr.hi |= CF8F_UPPER_HOI_LOI_SET; - wrmsr(msrnum, msr); */ -} - -void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - uint8_t spd_byte; - - banner("sdram_set_spd_register"); - post_code(POST_MEM_SETUP); // post_70h - - spd_byte = spd_read_byte(DIMM0, SPD_MODULE_ATTRIBUTES); - banner("Check DIMM 0"); - /* Check DIMM is not Register and not Buffered DIMMs. */ - if ((spd_byte != 0xFF) && (spd_byte & 3)) { - printk(BIOS_EMERG, "DIMM0 NOT COMPATIBLE\n"); - post_code(ERROR_UNSUPPORTED_DIMM); - hcf(); - } - banner("Check DIMM 1"); - spd_byte = spd_read_byte(DIMM1, SPD_MODULE_ATTRIBUTES); - if ((spd_byte != 0xFF) && (spd_byte & 3)) { - printk(BIOS_EMERG, "DIMM1 NOT COMPATIBLE\n"); - post_code(ERROR_UNSUPPORTED_DIMM); - hcf(); - } - - post_code(POST_MEM_SETUP2); // post_72h - banner("Check DDR MAX"); - - /* Check that the memory is not overclocked. */ - checkDDRMax(); - - /* Size the DIMMS */ - post_code(POST_MEM_SETUP3); // post_73h - banner("AUTOSIZE DIMM 0"); - auto_size_dimm(DIMM0); - post_code(POST_MEM_SETUP4); // post_74h - banner("AUTOSIZE DIMM 1"); - auto_size_dimm(DIMM1); - - /* Set CAS latency */ - banner("set cas latency"); - post_code(POST_MEM_SETUP5); // post_75h - setCAS(); - - /* Set all the other latencies here (tRAS, tRP....) */ - banner("set all latency"); - set_latencies(); - - /* Set Extended Mode Registers */ - banner("set emrs"); - set_extended_mode_registers(); - - banner("set ref rate"); - /* Set Memory Refresh Rate */ - set_refresh_rate(); - -} - -/* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence - * Section 4.1.4, GX/CS5535 GeodeROM Porting guide */ -void sdram_enable(int controllers, const struct mem_controller *ctrl) -{ - uint32_t i, msrnum; - msr_t msr; - -/********************************************************************* -;* Turn on MC/DIMM interface per JEDEC -;* 1) Clock stabilizes > 200us -;* 2) Assert CKE -;* 3) Precharge All to put all banks into an idles state -;* 4) EMRS to enable DLL -;* 6) MRS w/ memory config & reset DLL set -;* 7) Wait 200 clocks (2us) -;* 8) Precharge All and 2 Auto refresh -;* 9) MRS w/ memory config & reset DLL clear -;* 8) DDR SDRAM ready for normal operation -;********************************************************************/ - post_code(POST_MEM_ENABLE); // post_76h - -#ifdef TLA_MEMORY_DEBUG - /* Only enable MTest for TLA memory debug */ - EnableMTest(); -#endif - - /* If both Page Size = "Not Installed" we have a problems and should halt. */ - msr = rdmsr(MC_CF07_DATA); - if ((msr.hi & ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) == - ((7 << CF07_UPPER_D1_PSZ_SHIFT) | (7 << CF07_UPPER_D0_PSZ_SHIFT))) { - printk(BIOS_EMERG, "No memory in the system\n"); - post_code(ERROR_NO_DIMMS); - hcf(); - } - - /* Set CKEs */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo &= ~(CFCLK_LOWER_MASK_CKE_SET0 | CFCLK_LOWER_MASK_CKE_SET1); - wrmsr(msrnum, msr); - - /* Force Precharge All on next command, EMRS */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo |= CFCLK_LOWER_FORCE_PRE_SET; - wrmsr(msrnum, msr); - - /* EMRS to enable DLL (pre-setup done in setExtendedModeRegisters) */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET; - wrmsr(msrnum, msr); - msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DDR_SET); - wrmsr(msrnum, msr); - - /* Clear Force Precharge All */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET; - wrmsr(msrnum, msr); - - /* MRS Reset DLL - set */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo |= CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET; - wrmsr(msrnum, msr); - msr.lo &= ~(CF07_LOWER_PROG_DRAM_SET | CF07_LOWER_LOAD_MODE_DLL_RESET); - wrmsr(msrnum, msr); - - /* 2us delay (200 clocks @ 200MHz). We probably really don't need this but.... better safe. */ - /* Wait 2 PORT61 ticks. between 15us and 30us */ - /* This would be endless if the timer is stuck. */ - while ((inb(0x61))); /* find the first edge */ - while (!(~inb(0x61))); - - /* Force Precharge All on the next command, auto-refresh */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo |= CFCLK_LOWER_FORCE_PRE_SET; - wrmsr(msrnum, msr); - - /* Manually AUTO refresh #1 */ - /* If auto refresh was not enabled above we would need to do 8 refreshes to prime the pump before these 2. */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo |= CF07_LOWER_REF_TEST_SET; - wrmsr(msrnum, msr); - msr.lo &= ~CF07_LOWER_REF_TEST_SET; - wrmsr(msrnum, msr); - - /* Clear Force Precharge All */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo &= ~CFCLK_LOWER_FORCE_PRE_SET; - wrmsr(msrnum, msr); - - /* Manually AUTO refresh */ - /* The MC should insert the right delay between the refreshes */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo |= CF07_LOWER_REF_TEST_SET; - wrmsr(msrnum, msr); - msr.lo &= ~CF07_LOWER_REF_TEST_SET; - wrmsr(msrnum, msr); - - /* MRS Reset DLL - clear */ - msrnum = MC_CF07_DATA; - msr = rdmsr(msrnum); - msr.lo |= CF07_LOWER_PROG_DRAM_SET; - wrmsr(msrnum, msr); - msr.lo &= ~CF07_LOWER_PROG_DRAM_SET; - wrmsr(msrnum, msr); - - /* Allow MC to tristate during idle cycles with MTEST OFF */ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.lo &= ~CFCLK_LOWER_TRISTATE_DIS_SET; - wrmsr(msrnum, msr); - - /* Disable SDCLK DIMM1 slot if no DIMM installed to save power. */ - msr = rdmsr(MC_CF07_DATA); - if ((msr.hi & (7 << CF07_UPPER_D1_PSZ_SHIFT)) == - (7 << CF07_UPPER_D1_PSZ_SHIFT)) { - msrnum = GLCP_DELAY_CONTROLS; - msr = rdmsr(msrnum); - msr.hi |= (1 << 23); /* SDCLK bit for 2.0 */ - wrmsr(msrnum, msr); - } - - /* Set PMode0 Sensitivity Counter */ - msr.lo = 0; /* pmode 0 = 0 most aggressive */ - msr.hi = 0x200; /* pmode 1 = 200h */ - wrmsr(MC_CF_PMCTR, msr); - - /* Set PMode1 Up delay enable */ - msrnum = MC_CF1017_DATA; - msr = rdmsr(msrnum); - msr.lo |= (209 << 8); /* bits[15:8] = 209 */ - wrmsr(msrnum, msr); - - banner("DRAM controller init done.\n"); - post_code(POST_MEM_SETUP_GOOD); //0x7E - - /* make sure there is nothing stale in the cache */ - /* CAR stack is in the cache __asm__ __volatile__("wbinvd\n"); */ - - /* The RAM dll needs a write to lock on so generate a few dummy writes */ - /* Note: The descriptor needs to be enabled to point at memory */ - for (i = 0; i < 5; i++) { - write32(zeroptr + i, i); - } - /* SWAPSiF for PBZ 4112 (Errata 34) */ - /* check for failed DLL settings now that we have done a memory write. */ - msrnum = GLCP_DELAY_CONTROLS; - msr = rdmsr(msrnum); - if ((msr.lo & 0x7FF) == 0x104) { - - /* If you had it you would need to clear out the fail boot count flag */ - /* (depending on where it counts from etc). */ - - /* The reset we are about to perform clears the PM_SSC register in the */ - /* 5536 so will need to store the S3 resume flag in NVRAM otherwise */ - /* it would do a normal boot */ - - /* Reset the system */ - msrnum = MDD_SOFT_RESET; - msr = rdmsr(msrnum); - msr.lo |= 1; - wrmsr(msrnum, msr); - } - printk(BIOS_INFO, "RAM DLL lock\n"); - -} diff --git a/src/northbridge/amd/lx/raminit.h b/src/northbridge/amd/lx/raminit.h deleted file mode 100644 index a1c0fcd..0000000 --- a/src/northbridge/amd/lx/raminit.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef RAMINIT_H -#define RAMINIT_H - -#include <stdint.h> - -#define DIMM_SOCKETS 2 - -struct mem_controller { - uint16_t channel0[DIMM_SOCKETS]; -}; - -void sdram_set_registers(const struct mem_controller *ctrl); -void sdram_set_spd_registers(const struct mem_controller *ctrl); -void sdram_enable(int controllers, const struct mem_controller *ctrl); - -void sdram_initialize(int controllers, const struct mem_controller *ctrl); - -/* mainboard specific */ -int spd_read_byte(unsigned int device, unsigned int address); - -#endif diff --git a/src/southbridge/amd/cs5536/Kconfig b/src/southbridge/amd/cs5536/Kconfig deleted file mode 100644 index 6b06c33..0000000 --- a/src/southbridge/amd/cs5536/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008-2009 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -config SOUTHBRIDGE_AMD_CS5536 - bool - select UDELAY_TSC - -if SOUTHBRIDGE_AMD_CS5536 - -config NO_EARLY_SMBUS - def_bool n - help - Skip the CS5536 early SMBUS initialization. - -endif diff --git a/src/southbridge/amd/cs5536/Makefile.inc b/src/southbridge/amd/cs5536/Makefile.inc deleted file mode 100644 index 4bd88ac..0000000 --- a/src/southbridge/amd/cs5536/Makefile.inc +++ /dev/null @@ -1,27 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Advanced Micro Devices, Inc. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License version 2 as -## published by the Free Software Foundation. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -ifeq ($(CONFIG_SOUTHBRIDGE_AMD_CS5536),y) - -romstage-y += early_smbus.c -romstage-y += early_setup.c - -ramstage-y += cs5536.c -ramstage-y += ide.c -ramstage-y += pirq.c -ramstage-y += smbus.c -romstage-y += smbus.c - -endif diff --git a/src/southbridge/amd/cs5536/chip.h b/src/southbridge/amd/cs5536/chip.h deleted file mode 100644 index f5411c0..0000000 --- a/src/southbridge/amd/cs5536/chip.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _SOUTHBRIDGE_AMD_CS5536 -#define _SOUTHBRIDGE_AMD_CS5536 - -#define MAX_UNWANTED_VPCI 8 /* increase if needed */ - -struct southbridge_amd_cs5536_config { - unsigned int lpc_serirq_enable; /* interrupt enables for LPC bus; each bit is an irq 0-15 */ - unsigned int lpc_serirq_polarity; /* LPC IRQ polarity; each bit is an irq 0-15 */ - unsigned char lpc_serirq_mode; /* 0:Continuous 1:Quiet */ - unsigned int enable_gpio_int_route; /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. See virtual pci spec... */ - unsigned char enable_ide_nand_flash; /* 0:IDE 1:FLASH, if you are using nand flash instead of IDE drive */ - unsigned char enable_USBP4_device; /* Enable USB Port 4 0:host 1:device */ - unsigned int enable_USBP4_overcurrent; /* 0:off, xxxx:overcurrent setting, e.g. 0x3FEA CS5536 - Data Book (pages 380-381) */ - unsigned char com1_enable; /* enable COM1 */ - unsigned int com1_address; /* e.g. 0x3F8 */ - unsigned int com1_irq; /* e.g. 4 */ - unsigned char com2_enable; /* enable COM2 */ - unsigned int com2_address; /* e.g. 0x2F8 */ - unsigned int com2_irq; /* e.g. 3 */ - unsigned int unwanted_vpci[MAX_UNWANTED_VPCI]; /* the following allow you to disable unwanted virtualized PCI devices */ -}; - -#endif /* _SOUTHBRIDGE_AMD_CS5536 */ diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c deleted file mode 100644 index 956994d..0000000 --- a/src/southbridge/amd/cs5536/cs5536.c +++ /dev/null @@ -1,714 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include <arch/ioapic.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ops.h> -#include <device/pci_ids.h> -#include <device/smbus.h> -#include <console/console.h> -#include <stdint.h> -#include <pc80/isa-dma.h> -#include <pc80/mc146818rtc.h> -#include <pc80/i8259.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/vr.h> -#include <stdlib.h> -#include "chip.h" -#include "cs5536.h" -#include "smbus.h" - -struct msrinit { - u32 msrnum; - msr_t msr; -}; - -/* Master Configuration Register for Bus Masters.*/ -static struct msrinit SB_MASTER_CONF_TABLE[] = { - {USB2_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}}, - {ATA_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00048f000}}, - {AC97_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00008f000}}, - {MDD_SB_GLD_MSR_CONF, {.hi = 0,.lo = 0x00000f000}}, - {0, {0, 0}} -}; - -/* 5536 Clock Gating*/ -static struct msrinit CS5536_CLOCK_GATING_TABLE[] = { - /* MSR Setting*/ - {GLIU_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000004}}, - {GLPCI_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000005}}, - {GLCP_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000004}}, - {MDD_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x050554111}}, /* SMBus clock gating errata (PBZ 2226 & SiBZ 3977) */ - {ATA_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000005}}, - {AC97_SB_GLD_MSR_PM, {.hi = 0,.lo = 0x000000005}}, - {0, {0, 0}} -}; - -struct acpiinit { - u16 ioreg; - u32 regdata; -}; - -static struct acpiinit acpi_init_table[] = { - {ACPI_IO_BASE + 0x00, 0x01000000}, - {ACPI_IO_BASE + 0x08, 0}, - {ACPI_IO_BASE + 0x0C, 0}, - {ACPI_IO_BASE + 0x1C, 0}, - {ACPI_IO_BASE + 0x18, 0x0FFFFFFFF}, - {ACPI_IO_BASE + 0x00, 0x0000FFFF}, - {PMS_IO_BASE + PM_SCLK, 0x000000E00}, - {PMS_IO_BASE + PM_SED, 0x000004601}, - {PMS_IO_BASE + PM_SIDD, 0x000008C02}, - {PMS_IO_BASE + PM_WKD, 0x0000000A0}, - {PMS_IO_BASE + PM_WKXD, 0x0000000A0}, - {0, 0} -}; - -struct FLASH_DEVICE { - unsigned char fType; /* Flash type: NOR or NAND */ - unsigned char fInterface; /* Flash interface: I/O or Memory */ - unsigned long fMask; /* Flash size/mask */ -}; - -static struct FLASH_DEVICE FlashInitTable[] = { - {FLASH_TYPE_NAND, FLASH_IF_MEM, FLASH_MEM_4K}, /* CS0, or Flash Device 0 */ - {FLASH_TYPE_NONE, 0, 0}, /* CS1, or Flash Device 1 */ - {FLASH_TYPE_NONE, 0, 0}, /* CS2, or Flash Device 2 */ - {FLASH_TYPE_NONE, 0, 0}, /* CS3, or Flash Device 3 */ -}; - -#define FlashInitTableLen (ARRAY_SIZE(FlashInitTable)) - -static u32 FlashPort[] = { - MDD_LBAR_FLSH0, - MDD_LBAR_FLSH1, - MDD_LBAR_FLSH2, - MDD_LBAR_FLSH3 -}; - -/* ***************************************************************************/ -/* **/ -/* * pmChipsetInit*/ -/* **/ -/* * Program ACPI LBAR and initialize ACPI registers.*/ -/* **/ -/* ***************************************************************************/ -static void pmChipsetInit(void) -{ - u32 val = 0; - u16 port; - - port = (PMS_IO_BASE + 0x010); - val = 0x0E00; /* 1ms */ - outl(val, port); - - /* PM_WKXD */ - /* Make sure bits[3:0]=0000b to clear the */ - /* saved Sx state */ - port = (PMS_IO_BASE + 0x034); - val = 0x0A0; /* 5ms */ - outl(val, port); - - /* PM_WKD */ - port = (PMS_IO_BASE + 0x030); - outl(val, port); - - /* PM_SED */ - port = (PMS_IO_BASE + 0x014); - val = 0x04601; /* 5ms, # of 3.57954MHz clock edges */ - outl(val, port); - - /* PM_SIDD */ - port = (PMS_IO_BASE + 0x020); - val = 0x08C02; /* 10ms, # of 3.57954MHz clock edges */ - outl(val, port); -} - -/*************************************************************************** - * - * ChipsetFlashSetup - * - * Flash LBARs need to be setup before VSA init so the PCI BARs have - * correct size info. Call this routine only if flash needs to be - * configured (don't call it if you want IDE). - * - **************************************************************************/ -static void ChipsetFlashSetup(void) -{ - msr_t msr; - int i; - int numEnabled = 0; - - printk(BIOS_DEBUG, "ChipsetFlashSetup: Start\n"); - for (i = 0; i < FlashInitTableLen; i++) { - if (FlashInitTable[i].fType != FLASH_TYPE_NONE) { - printk(BIOS_DEBUG, "Enable CS%d\n", i); - /* we need to configure the memory/IO mask */ - msr = rdmsr(FlashPort[i]); - msr.hi = 0; /* start with the "enabled" bit clear */ - if (FlashInitTable[i].fType == FLASH_TYPE_NAND) - msr.hi |= 0x00000002; - else - msr.hi &= ~0x00000002; - if (FlashInitTable[i].fInterface == FLASH_IF_MEM) - msr.hi |= 0x00000004; - else - msr.hi &= ~0x00000004; - msr.hi |= FlashInitTable[i].fMask; - printk(BIOS_DEBUG, "MSR(0x%08X, %08X_%08X)\n", FlashPort[i], - msr.hi, msr.lo); - wrmsr(FlashPort[i], msr); - - /* now write-enable the device */ - msr = rdmsr(MDD_NORF_CNTRL); - msr.lo |= (1 << i); - printk(BIOS_DEBUG, "MSR(0x%08X, %08X_%08X)\n", MDD_NORF_CNTRL, - msr.hi, msr.lo); - wrmsr(MDD_NORF_CNTRL, msr); - - /* update the number enabled */ - numEnabled++; - } - } - - printk(BIOS_DEBUG, "ChipsetFlashSetup: Finish\n"); - -} - -/* ***************************************************************************/ -/* **/ -/* * enable_ide_nand_flash_header */ -/* Run after VSA init to enable the flash PCI device header */ -/* **/ -/* ***************************************************************************/ -static void enable_ide_nand_flash_header(void) -{ - /* Tell VSA to use FLASH PCI header. Not IDE header. */ - outl(0x80007A40, 0xCF8); - outl(0xDEADBEEF, 0xCFC); -} - -#define RTC_CENTURY 0x32 -#define RTC_DOMA 0x3D -#define RTC_MONA 0x3E - -static void lpc_init(struct southbridge_amd_cs5536_config *sb) -{ - msr_t msr; - - if (sb->lpc_serirq_enable) { - msr.lo = sb->lpc_serirq_enable; - msr.hi = 0; - wrmsr(MDD_IRQM_LPC, msr); - if (sb->lpc_serirq_polarity) { - msr.lo = sb->lpc_serirq_polarity << 16; - msr.lo |= (sb->lpc_serirq_mode << 6) | (1 << 7); /* enable */ - msr.hi = 0; - wrmsr(MDD_LPC_SIRQ, msr); - } - } - - /* Allow DMA from LPC */ - msr = rdmsr(MDD_DMA_MAP); - msr.lo = 0x7777; - wrmsr(MDD_DMA_MAP, msr); - - /* enable the RTC/CMOS century byte at address 32h */ - msr = rdmsr(MDD_RTC_CENTURY_OFFSET); - msr.lo = RTC_CENTURY; - wrmsr(MDD_RTC_CENTURY_OFFSET, msr); - - /* enable the RTC/CMOS day of month and month alarms */ - msr = rdmsr(MDD_RTC_DOMA_IND); - msr.lo = RTC_DOMA; - wrmsr(MDD_RTC_DOMA_IND, msr); - - msr = rdmsr(MDD_RTC_MONA_IND); - msr.lo = RTC_MONA; - wrmsr(MDD_RTC_MONA_IND, msr); - - cmos_init(0); - - isa_dma_init(); -} - - -/** - * Depending on settings in the config struct, enable COM1 or COM2 or both. - * - * If the enable is NOT set, the UARTs are explicitly disabled, which is - * required if (e.g.) there is a Super I/O attached that does COM1 or COM2. - * - * @param sb Southbridge config structure. - */ -static void uarts_init(struct southbridge_amd_cs5536_config *sb) -{ - msr_t msr; - u16 addr = 0; - u32 gpio_addr; - struct device *dev; - - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0); - gpio_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1); - gpio_addr &= ~1; /* Clear I/O bit */ - printk(BIOS_DEBUG, "GPIO_ADDR: %08X\n", gpio_addr); - - /* This could be extended to support IR modes. */ - - /* COM1 */ - if (sb->com1_enable) { - printk(BIOS_SPEW, "uarts_init: enable COM1\n"); - /* Set the address. */ - switch (sb->com1_address) { - case 0x3F8: - addr = 7; - break; - case 0x3E8: - addr = 6; - break; - case 0x2F8: - addr = 5; - break; - case 0x2E8: - addr = 4; - break; - } - msr = rdmsr(MDD_LEG_IO); - msr.lo |= addr << 16; - wrmsr(MDD_LEG_IO, msr); - - /* Set the IRQ. */ - msr = rdmsr(MDD_IRQM_YHIGH); - msr.lo |= sb->com1_irq << 24; - wrmsr(MDD_IRQM_YHIGH, msr); - - /* GPIO8 - UART1_TX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_8_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); - /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_8_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); - - /* GPIO9 - UART1_RX */ - /* Set: Input Enable (0x20) */ - outl(GPIOL_9_SET, gpio_addr + GPIOL_INPUT_ENABLE); - /* Set: INAUX1 Select (0x34) */ - outl(GPIOL_9_SET, gpio_addr + GPIOL_IN_AUX1_SELECT); - - /* Set: GPIO 8 + 9 Pull Up (0x18) */ - outl(GPIOL_8_SET | GPIOL_9_SET, - gpio_addr + GPIOL_PULLUP_ENABLE); - - /* Enable COM1. - * - * Bit 1 = device enable - * Bit 4 = allow access to the upper banks - */ - msr.lo = (1 << 4) | (1 << 1); - msr.hi = 0; - wrmsr(MDD_UART1_CONF, msr); - } else { - /* Reset and disable COM1. */ - printk(BIOS_SPEW, "uarts_init: disable COM1\n"); - msr = rdmsr(MDD_UART1_CONF); - msr.lo = 1; /* Reset */ - wrmsr(MDD_UART1_CONF, msr); - msr.lo = 0; /* Disabled */ - wrmsr(MDD_UART1_CONF, msr); - - /* Disable the IRQ. */ - msr = rdmsr(MDD_LEG_IO); - msr.lo &= ~(0xF << 16); - wrmsr(MDD_LEG_IO, msr); - } - - /* COM2 */ - if (sb->com2_enable) { - printk(BIOS_SPEW, "uarts_init: enable COM2\n"); - switch (sb->com2_address) { - case 0x3F8: - addr = 7; - break; - case 0x3E8: - addr = 6; - break; - case 0x2F8: - addr = 5; - break; - case 0x2E8: - addr = 4; - break; - } - msr = rdmsr(MDD_LEG_IO); - msr.lo |= addr << 20; - wrmsr(MDD_LEG_IO, msr); - printk(BIOS_SPEW, "uarts_init: wrote COM2 address 0x%x\n", sb->com2_address); - - /* Set the IRQ. */ - msr = rdmsr(MDD_IRQM_YHIGH); - msr.lo |= sb->com2_irq << 28; - wrmsr(MDD_IRQM_YHIGH, msr); - printk(BIOS_SPEW, "uarts_init: set COM2 irq\n"); - - /* GPIO3 - UART2_RX */ - /* Set: Input Enable (0x20) */ - outl(GPIOL_3_SET, gpio_addr + GPIOL_INPUT_ENABLE); - /* Set: INAUX1 Select (0x34) */ - outl(GPIOL_3_SET, gpio_addr + GPIOL_IN_AUX1_SELECT); - - /* GPIO4 - UART2_TX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_OUTPUT_ENABLE); - printk(BIOS_SPEW, "uarts_init: set output enable\n"); - /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_4_SET, gpio_addr + GPIOL_OUT_AUX1_SELECT); - printk(BIOS_SPEW, "uarts_init: set OUTAUX1\n"); - - /* Set: GPIO 3 + 4 Pull Up (0x18) */ - outl(GPIOL_3_SET | GPIOL_4_SET, - gpio_addr + GPIOL_PULLUP_ENABLE); - printk(BIOS_SPEW, "uarts_init: set pullup COM2\n"); - - /* Enable COM2. - * - * Bit 1 = device enable - * Bit 4 = allow access to the upper banks - */ - msr.lo = (1 << 4) | (1 << 1); - msr.hi = 0; - wrmsr(MDD_UART2_CONF, msr); - printk(BIOS_SPEW, "uarts_init: COM2 enabled\n"); - } else { - printk(BIOS_SPEW, "uarts_init: disable COM2\n"); - /* Reset and disable COM2. */ - msr = rdmsr(MDD_UART2_CONF); - msr.lo = 1; /* Reset */ - wrmsr(MDD_UART2_CONF, msr); - msr.lo = 0; /* Disabled */ - wrmsr(MDD_UART2_CONF, msr); - - /* Disable the IRQ. */ - msr = rdmsr(MDD_LEG_IO); - msr.lo &= ~(0xF << 20); - wrmsr(MDD_LEG_IO, msr); - } -} - - -#define HCCPARAMS 0x08 -#define IPREG04 0xA0 - #define USB_HCCPW_SET (1 << 1) -#define UOCCAP 0x00 - #define APU_SET (1 << 15) -#define UOCMUX 0x04 -#define PMUX_HOST 0x02 -#define PMUX_DEVICE 0x03 - #define PUEN_SET (1 << 2) -#define UDCDEVCTL 0x404 - #define UDC_SD_SET (1 << 10) -#define UOCCTL 0x0C - #define PADEN_SET (1 << 7) - -static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb) -{ - void *bar; - msr_t msr; - struct device *dev; - - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_EHCI, 0); - if (dev) { - - /* Serial Short Detect Enable */ - msr = rdmsr(USB2_SB_GLD_MSR_CONF); - msr.hi |= USB2_UPPER_SSDEN_SET; - wrmsr(USB2_SB_GLD_MSR_CONF, msr); - - /* write to clear diag register */ - wrmsr(USB2_SB_GLD_MSR_DIAG, rdmsr(USB2_SB_GLD_MSR_DIAG)); - - bar = (void *)pci_read_config32(dev, PCI_BASE_ADDRESS_0); - - /* Make HCCPARAMS writable */ - write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET); - - /* ; EECP=50h, IST=01h, ASPC=1 */ - write32(bar + HCCPARAMS, 0x00005012); - } - - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) { - bar = (void *)pci_read_config32(dev, PCI_BASE_ADDRESS_0); - - write32(bar + UOCMUX, read32(bar + UOCMUX) & PUEN_SET); - - /* Host or Device? */ - if (sb->enable_USBP4_device) { - write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_DEVICE); - } else { - write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_HOST); - } - - /* Overcurrent configuration */ - if (sb->enable_USBP4_overcurrent) { - write32(bar + UOCCAP, read32(bar + UOCCAP) - | sb->enable_USBP4_overcurrent); - } - } - - /* PBz#6466: If the UOC(OTG) device, port 4, is configured as a device, - * then perform the following sequence: - * - * - set SD bit in DEVCTRL udc register - * - set PADEN (former OTGPADEN) bit in uoc register - * - set APU bit in uoc register */ - if (sb->enable_USBP4_device) { - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_UDC, 0); - if (dev) { - bar = (void *)pci_read_config32(dev, - PCI_BASE_ADDRESS_0); - write32(bar + UDCDEVCTL, - read32(bar + UDCDEVCTL) | UDC_SD_SET); - - } - - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) { - bar = (void *)pci_read_config32(dev, - PCI_BASE_ADDRESS_0); - write32(bar + UOCCTL, read32(bar + UOCCTL) | PADEN_SET); - write32(bar + UOCCAP, read32(bar + UOCCAP) | APU_SET); - } - } - - /* Disable virtual PCI UDC and OTG headers */ - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_UDC, 0); - if (dev) { - pci_write_config32(dev, 0x7C, 0xDEADBEEF); - } - - dev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) { - pci_write_config32(dev, 0x7C, 0xDEADBEEF); - } -} - -/**************************************************************************** - * - * ChipsetInit - * - * Called from northbridge init (Pre-VSA). - * - ****************************************************************************/ -void chipsetinit(void) -{ - struct device *dev; - msr_t msr; - u32 msrnum; - struct southbridge_amd_cs5536_config *sb; - struct msrinit *csi; - - dev = dev_find_slot(0, PCI_DEVFN(0xf, 0)); - - if (!dev) { - printk(BIOS_ERR, "CS5536 not found.\n"); - return; - } - - sb = (struct southbridge_amd_cs5536_config *)dev->chip_info; - - if (!sb) { - printk(BIOS_ERR, "CS5536 configuration not found.\n"); - return; - } - - post_code(P80_CHIPSET_INIT); - - /* we hope NEVER to be in coreboot when S3 resumes - if (! IsS3Resume()) */ - { - struct acpiinit *aci = acpi_init_table; - for (; aci->ioreg; aci++) { - outl(aci->regdata, aci->ioreg); - inl(aci->ioreg); - } - - pmChipsetInit(); - } - - /* set hd IRQ */ - outl(GPIOL_2_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE); - outl(GPIOL_2_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT); - - /* Allow IO read and writes during a ATA DMA operation. */ - /* This could be done in the HD ROM but do it here for easier debugging. */ - msrnum = ATA_SB_GLD_MSR_ERR; - msr = rdmsr(msrnum); - msr.lo &= ~0x100; - wrmsr(msrnum, msr); - - /* Enable Post Primary IDE. */ - msrnum = GLPCI_SB_CTRL; - msr = rdmsr(msrnum); - msr.lo |= GLPCI_CRTL_PPIDE_SET; - wrmsr(msrnum, msr); - - csi = SB_MASTER_CONF_TABLE; - for (; csi->msrnum; csi++) { - msr.lo = csi->msr.lo; - msr.hi = csi->msr.hi; - wrmsr(csi->msrnum, msr); // MSR - see table above - } - - /* Flash BAR size Setup */ - printk(BIOS_INFO, "%sDoing ChipsetFlashSetup()\n", - sb->enable_ide_nand_flash == 1 ? "" : "Not "); - if (sb->enable_ide_nand_flash == 1) - ChipsetFlashSetup(); - - /* */ - /* Set up Hardware Clock Gating */ - /* */ - { - csi = CS5536_CLOCK_GATING_TABLE; - for (; csi->msrnum; csi++) { - msr.lo = csi->msr.lo; - msr.hi = csi->msr.hi; - wrmsr(csi->msrnum, msr); // MSR - see table above - } - } -} - -static void southbridge_init(struct device *dev) -{ - struct southbridge_amd_cs5536_config *sb = - (struct southbridge_amd_cs5536_config *)dev->chip_info; - int i; - /* - * struct device *gpiodev; - * unsigned short gpiobase = MDD_GPIO; - */ - - printk(BIOS_INFO, "cs5536: %s\n", __func__); - - if (!sb) { - printk(BIOS_ERR, "CS5536 configuration not found.\n"); - return; - } - - setup_i8259(); - lpc_init(sb); - uarts_init(sb); - - if (sb->enable_gpio_int_route) { - vrWrite((VRC_MISCELLANEOUS << 8) + PCI_INT_AB, - (sb->enable_gpio_int_route & 0xFFFF)); - vrWrite((VRC_MISCELLANEOUS << 8) + PCI_INT_CD, - (sb->enable_gpio_int_route >> 16)); - } - - printk(BIOS_DEBUG, "cs5536: %s: enable_ide_nand_flash is %d\n", __func__, - sb->enable_ide_nand_flash); - if (sb->enable_ide_nand_flash == 1) { - enable_ide_nand_flash_header(); - } - - enable_USB_port4(sb); - - /* disable unwanted virtual PCI devices */ - for (i = 0; (i < MAX_UNWANTED_VPCI) && (0 != sb->unwanted_vpci[i]); i++) { - printk(BIOS_DEBUG, "Disabling VPCI device: 0x%08X\n", - sb->unwanted_vpci[i]); - outl(sb->unwanted_vpci[i] + 0x7C, 0xCF8); - outl(0xDEADBEEF, 0xCFC); - } -} - -static void cs5536_read_resources(struct device *dev) -{ - struct resource *res; - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x1000UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static void southbridge_enable(struct device *dev) -{ - printk(BIOS_DEBUG, "cs5536: %s: dev is %p\n", __func__, dev); - -} - -static int lsmbus_read_byte(struct device *dev, u8 address) -{ - u16 device; - struct resource *res; - struct bus *pbus; - - device = dev->path.i2c.device; - pbus = get_pbus_smbus(dev); - res = find_resource(pbus->dev, 0x10); - - return do_smbus_read_byte(res->base, device, address); -} - -static struct smbus_bus_operations lops_smbus_bus = { - .read_byte = lsmbus_read_byte, -}; - -static void scan_lpc_smbus(struct device *dev) -{ - /* FIXME. Do we have mixed LPC/SMBus device node here. */ - scan_smbus(dev); -} - -static struct device_operations southbridge_ops = { - .read_resources = cs5536_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = southbridge_init, - .scan_bus = scan_lpc_smbus, - .ops_smbus_bus = &lops_smbus_bus, -}; - -static const struct pci_driver cs5536_pci_driver __pci_driver = { - .ops = &southbridge_ops, - .vendor = PCI_VENDOR_ID_AMD, - .device = PCI_DEVICE_ID_AMD_CS5536_ISA -}; - -struct chip_operations southbridge_amd_cs5536_ops = { - CHIP_NAME("AMD Geode CS5536 Southbridge") - /* This is only called when this device is listed in the - * static device tree. - */ - .enable_dev = southbridge_enable, -}; diff --git a/src/southbridge/amd/cs5536/cs5536.h b/src/southbridge/amd/cs5536/cs5536.h deleted file mode 100644 index 06c504a..0000000 --- a/src/southbridge/amd/cs5536/cs5536.h +++ /dev/null @@ -1,454 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _CS5536_H -#define _CS5536_H - -#define Cx5536_ID ( 0x208F1022) - -/* SouthBridge Equates */ -#define CS5536_GLINK_PORT_NUM 0x02 /* port of the SouthBridge */ -#define NB_PCI ((2 << 29) + (4 << 26)) /* NB GLPCI is in the same location on all Geodes. */ -#define MSR_SB ((CS5536_GLINK_PORT_NUM << 23) + NB_PCI) /* address to the SouthBridge */ -#define SB_SHIFT 20 /* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift. */ - -#define CS5536_DEV_NUM 0x0F /* default PCI device number for CS5536 */ -#define SMBUS_IO_BASE 0x6000 -#define GPIO_IO_BASE 0x6100 -#define MFGPT_IO_BASE 0x6200 -#define ACPI_IO_BASE 0x9C00 -#define PMS_IO_BASE 0x9D00 - -#define CS5535_IDSEL 0x02000000 /* IDSEL = AD25, device #15 */ -#define CHIPSET_DEV_NUM 15 -#define IDSEL_BASE 11 /* bit 11 = device 1 */ - -/* Cs5536 as follows. */ -/* SB_GLIU */ -/* port0 - GLIU */ -/* port1 - GLPCI */ -/* port2 - USB Controller #2 */ -/* port3 - ATA-5 Controller */ -/* port4 - MDD */ -/* port5 - AC97 */ -/* port6 - USB Controller #1 */ -/* port7 - GLCP */ - -#define MSR_SB_GLIU ((9 << 14) + MSR_SB) /* 51024xxx or 510*xxxx - fake out just like GL0 on CPU. */ -#define MSR_SB_GLPCI (MSR_SB) /* 5100xxxx - don't go to the GLIU */ -#define MSR_SB_USB2 ((2 << SB_SHIFT) + MSR_SB) /* 5120xxxx */ -#define MSR_SB_ATA ((3 << SB_SHIFT) + MSR_SB) /* 5130xxxx */ -#define MSR_SB_MDD ((4 << SB_SHIFT) + MSR_SB) /* 5140xxxx, a.k.a. DIVIL = Diverse Integrated Logic device */ -#define MSR_SB_AC97 ((5 << SB_SHIFT) + MSR_SB) /* 5150xxxx */ -#define MSR_SB_USB1 ((6 << SB_SHIFT) + MSR_SB) /* 5160xxxx */ -#define MSR_SB_GLCP ((7 << SB_SHIFT) + MSR_SB) /* 5170xxxx */ - -/* GLIU */ -#define GLIU_SB_GLD_MSR_CAP (MSR_SB_GLIU + 0x00) -#define GLIU_SB_GLD_MSR_CONF (MSR_SB_GLIU + 0x01) -#define GLIU_SB_GLD_MSR_PM (MSR_SB_GLIU + 0x04) - -/* USB1 */ -#define USB1_SB_GLD_MSR_CAP (MSR_SB_USB1 + 0x00) -#define USB1_SB_GLD_MSR_CONF (MSR_SB_USB1 + 0x01) -#define USB1_SB_GLD_MSR_PM (MSR_SB_USB1 + 0x04) - -/* USB2 */ -#define USB2_SB_GLD_MSR_CAP (MSR_SB_USB2 + 0x00) -#define USB2_SB_GLD_MSR_CONF (MSR_SB_USB2 + 0x01) -#define USB2_UPPER_SSDEN_SET (1 << 3 ) /* Bit 35 */ -#define USB2_SB_GLD_MSR_PM (MSR_SB_USB2 + 0x04) -#define USB2_SB_GLD_MSR_DIAG (MSR_SB_USB2 + 0x05) -#define USB2_SB_GLD_MSR_OHCI_BASE (MSR_SB_USB2 + 0x08) -#define USB2_SB_GLD_MSR_EHCI_BASE (MSR_SB_USB2 + 0x09) -#define USB2_SB_GLD_MSR_DEVCTL_BASE (MSR_SB_USB2 + 0x0A) -#define USB2_SB_GLD_MSR_UOC_BASE (MSR_SB_USB2 + 0x0B) /* Option controller base */ - -/* ATA */ -#define ATA_SB_GLD_MSR_CAP (MSR_SB_ATA + 0x00) -#define ATA_SB_GLD_MSR_CONF (MSR_SB_ATA + 0x01) -#define ATA_SB_GLD_MSR_ERR (MSR_SB_ATA + 0x03) -#define ATA_SB_GLD_MSR_PM (MSR_SB_ATA + 0x04) -#define ATA_SB_IDE_CFG (MSR_SB_ATA + 0x10) - -/* AC97 */ -#define AC97_SB_GLD_MSR_CAP (MSR_SB_AC97 + 0x00) -#define AC97_SB_GLD_MSR_CONF (MSR_SB_AC97 + 0x01) -#define AC97_SB_GLD_MSR_PM (MSR_SB_AC97 + 0x04) - -/* GLPCI */ -#define GLPCI_SB_GLD_MSR_CAP (MSR_SB_GLPCI + 0x00) -#define GLPCI_SB_GLD_MSR_CONF (MSR_SB_GLPCI + 0x01) -#define GLPCI_SB_GLD_MSR_PM (MSR_SB_GLPCI + 0x04) -#define GLPCI_SB_CTRL (MSR_SB_GLPCI + 0x10) -#define GLPCI_CRTL_PPIDE_SET (1 << 17) - -/* GLCP */ -#define GLCP_SB_GLD_MSR_CAP (MSR_SB_GLCP + 0x00) -#define GLCP_SB_GLD_MSR_CONF (MSR_SB_GLCP + 0x01) -#define GLCP_SB_GLD_MSR_PM (MSR_SB_GLCP + 0x04) -#define GLCP_SB_CLKOFF (MSR_SB_GLCP + 0x10) - -/* MDD */ -#define MDD_SB_GLD_MSR_CAP (MSR_SB_MDD + 0x00) -#define MDD_SB_GLD_MSR_CONF (MSR_SB_MDD + 0x01) -#define MDD_SB_GLD_MSR_PM (MSR_SB_MDD + 0x04) -#define LBAR_EN (0x01) -#define IO_MASK (0x1f) -#define MEM_MASK (0x0FFFFF) -#define MDD_LBAR_IRQ (MSR_SB_MDD + 0x08) -#define MDD_LBAR_KEL1 (MSR_SB_MDD + 0x09) -#define MDD_LBAR_KEL2 (MSR_SB_MDD + 0x0A) -#define MDD_LBAR_SMB (MSR_SB_MDD + 0x0B) -#define MDD_LBAR_GPIO (MSR_SB_MDD + 0x0C) -#define MDD_LBAR_MFGPT (MSR_SB_MDD + 0x0D) -#define MDD_LBAR_ACPI (MSR_SB_MDD + 0x0E) -#define MDD_LBAR_PMS (MSR_SB_MDD + 0x0F) - -#define MDD_LBAR_FLSH0 (MSR_SB_MDD + 0x10) -#define MDD_LBAR_FLSH1 (MSR_SB_MDD + 0x11) -#define MDD_LBAR_FLSH2 (MSR_SB_MDD + 0x12) -#define MDD_LBAR_FLSH3 (MSR_SB_MDD + 0x13) -#define MDD_LEG_IO (MSR_SB_MDD + 0x14) -#define MDD_PIN_OPT (MSR_SB_MDD + 0x15) -#define MDD_SOFT_IRQ (MSR_SB_MDD + 0x16) -#define MDD_SOFT_RESET (MSR_SB_MDD + 0x17) -#define MDD_NORF_CNTRL (MSR_SB_MDD + 0x18) -#define MDD_NORF_T01 (MSR_SB_MDD + 0x19) -#define MDD_NORF_T23 (MSR_SB_MDD + 0x1A) -#define MDD_NANDF_DATA (MSR_SB_MDD + 0x1B) -#define MDD_NADF_CNTL (MSR_SB_MDD + 0x1C) -#define MDD_AC_DMA (MSR_SB_MDD + 0x1E) -#define MDD_KEL_CNTRL (MSR_SB_MDD + 0x1F) - -#define MDD_IRQM_YLOW (MSR_SB_MDD + 0x20) -#define MDD_IRQM_YHIGH (MSR_SB_MDD + 0x21) -#define MDD_IRQM_ZLOW (MSR_SB_MDD + 0x22) -#define MDD_IRQM_ZHIGH (MSR_SB_MDD + 0x23) -#define MDD_IRQM_PRIM (MSR_SB_MDD + 0x24) -#define MDD_IRQM_LPC (MSR_SB_MDD + 0x25) -#define MDD_IRQM_LXIRR (MSR_SB_MDD + 0x26) -#define MDD_IRQM_HXIRR (MSR_SB_MDD + 0x27) - -#define MDD_MFGPT_IRQ (MSR_SB_MDD + 0x28) -#define MDD_MFGPT_NR (MSR_SB_MDD + 0x29) -#define MDD_MFGPT_RES0 (MSR_SB_MDD + 0x2A) -#define MDD_MFGPT_RES1 (MSR_SB_MDD + 0x2B) - -#define MDD_FLOP_S3F2 (MSR_SB_MDD + 0x30) -#define MDD_FLOP_S3F7 (MSR_SB_MDD + 0x31) -#define MDD_FLOP_S372 (MSR_SB_MDD + 0x32) -#define MDD_FLOP_S377 (MSR_SB_MDD + 0x33) - -#define MDD_PIC_S (MSR_SB_MDD + 0x34) -#define MDD_PIT_S (MSR_SB_MDD + 0x36) -#define MDD_PIT_CNTRL (MSR_SB_MDD + 0x37) - -#define MDD_UART1_MOD (MSR_SB_MDD + 0x38) -#define MDD_UART1_DON (MSR_SB_MDD + 0x39) -#define MDD_UART1_CONF (MSR_SB_MDD + 0x3A) -#define MDD_UART2_MOD (MSR_SB_MDD + 0x3C) -#define MDD_UART2_DON (MSR_SB_MDD + 0x3D) -#define MDD_UART2_CONF (MSR_SB_MDD + 0x3E) - -#define MDD_DMA_MAP (MSR_SB_MDD + 0x40) -#define MDD_DMA_SHAD1 (MSR_SB_MDD + 0x41) -#define MDD_DMA_SHAD2 (MSR_SB_MDD + 0x42) -#define MDD_DMA_SHAD3 (MSR_SB_MDD + 0x43) -#define MDD_DMA_SHAD4 (MSR_SB_MDD + 0x44) -#define MDD_DMA_SHAD5 (MSR_SB_MDD + 0x45) -#define MDD_DMA_SHAD6 (MSR_SB_MDD + 0x46) -#define MDD_DMA_SHAD7 (MSR_SB_MDD + 0x47) -#define MDD_DMA_SHAD8 (MSR_SB_MDD + 0x48) -#define MDD_DMA_SHAD9 (MSR_SB_MDD + 0x49) - -#define MDD_LPC_EADDR (MSR_SB_MDD + 0x4C) -#define MDD_LPC_ESTAT (MSR_SB_MDD + 0x4D) -#define MDD_LPC_SIRQ (MSR_SB_MDD + 0x4E) -#define MDD_LPC_RES (MSR_SB_MDD + 0x4F) - -#define MDD_PML_TMR (MSR_SB_MDD + 0x50) -#define MDD_RTC_RAM_LO_CK (MSR_SB_MDD + 0x54) -#define MDD_RTC_DOMA_IND (MSR_SB_MDD + 0x55) -#define MDD_RTC_MONA_IND (MSR_SB_MDD + 0x56) -#define MDD_RTC_CENTURY_OFFSET (MSR_SB_MDD + 0x57) - -/* LBUS Device Equates - */ - -/* SMBus */ -#define SMB_SDA 0x00 -#define SMB_STS 0x01 -#define SMB_STS_SLVSTP (0x01 << 7) -#define SMB_STS_SDAST (0x01 << 6) -#define SMB_STS_BER (0x01 << 5) -#define SMB_STS_NEGACK (0x01 << 4) -#define SMB_STS_STASTR (0x01 << 3) -#define SMB_STS_NMATCH (0x01 << 2) -#define SMB_STS_MASTER (0x01 << 1) -#define SMB_STS_XMIT (0x01 << 0) - -#define SMB_CTRL_STS 0x02 -#define SMB_CSTS_TGSCL (0x01 << 5) -#define SMB_CSTS_TSDA (0x01 << 4) -#define SMB_CSTS_GCMTCH (0x01 << 3) -#define SMB_CSTS_MATCH (0x01 << 2) -#define SMB_CSTS_BB (0x01 << 1) -#define SMB_CSTS_BUSY (0x01 << 0) - -#define SMB_CTRL1 0x03 -#define SMB_CTRL1_STASTRE (0x01 << 7) -#define SMB_CTRL1_NMINTE (0x01 << 6) -#define SMB_CTRL1_GCMEN (0x01 << 5) -#define SMB_CTRL1_ACK (0x01 << 4) -#define SMB_CTRL1_RSVD (0x01 << 3) -#define SMB_CTRL1_INTEN (0x01 << 2) -#define SMB_CTRL1_STOP (0x01 << 1) -#define SMB_CTRL1_START (0x01 << 0) - -#define SMB_ADD 0x04 -#define SMB_ADD_SAEN (0x01 << 7) - -#define SMB_CTRL2 0x05 -#define SMB_CTRL2_ENABLE (0x01 << 0) - -#define SMB_CTRL3 0x06 - -/* GPIO */ -#define GPIOL_0_SET (1 << 0) -#define GPIOL_1_SET (1 << 1) -#define GPIOL_2_SET (1 << 2) -#define GPIOL_3_SET (1 << 3) -#define GPIOL_4_SET (1 << 4) -#define GPIOL_5_SET (1 << 5) -#define GPIOL_6_SET (1 << 6) -#define GPIOL_7_SET (1 << 7) -#define GPIOL_8_SET (1 << 8) -#define GPIOL_9_SET (1 << 9) -#define GPIOL_10_SET (1 << 10) -#define GPIOL_11_SET (1 << 11) -#define GPIOL_12_SET (1 << 12) -#define GPIOL_13_SET (1 << 13) -#define GPIOL_14_SET (1 << 14) -#define GPIOL_15_SET (1 << 15) - -#define GPIOL_0_CLEAR (1 << 16) -#define GPIOL_1_CLEAR (1 << 17) -#define GPIOL_2_CLEAR (1 << 18) -#define GPIOL_3_CLEAR (1 << 19) -#define GPIOL_4_CLEAR (1 << 20) -#define GPIOL_5_CLEAR (1 << 21) -#define GPIOL_6_CLEAR (1 << 22) -#define GPIOL_7_CLEAR (1 << 23) -#define GPIOL_8_CLEAR (1 << 24) -#define GPIOL_9_CLEAR (1 << 25) -#define GPIOL_10_CLEAR (1 << 26) -#define GPIOL_11_CLEAR (1 << 27) -#define GPIOL_12_CLEAR (1 << 28) -#define GPIOL_13_CLEAR (1 << 29) -#define GPIOL_14_CLEAR (1 << 30) -#define GPIOL_15_CLEAR (1 << 31) - -#define GPIOH_16_SET (1 << 0) -#define GPIOH_17_SET (1 << 1) -#define GPIOH_18_SET (1 << 2) -#define GPIOH_19_SET (1 << 3) -#define GPIOH_20_SET (1 << 4) -#define GPIOH_21_SET (1 << 5) -#define GPIOH_22_SET (1 << 6) -#define GPIOH_23_SET (1 << 7) -#define GPIOH_24_SET (1 << 8) -#define GPIOH_25_SET (1 << 9) -#define GPIOH_26_SET (1 << 10) -#define GPIOH_27_SET (1 << 11) -#define GPIOH_28_SET (1 << 12) -#define GPIOH_29_SET (1 << 13) -#define GPIOH_30_SET (1 << 14) -#define GPIOH_31_SET (1 << 15) - -#define GPIOH_16_CLEAR (1 << 16) -#define GPIOH_17_CLEAR (1 << 17) -#define GPIOH_18_CLEAR (1 << 18) -#define GPIOH_19_CLEAR (1 << 19) -#define GPIOH_20_CLEAR (1 << 20) -#define GPIOH_21_CLEAR (1 << 21) -#define GPIOH_22_CLEAR (1 << 22) -#define GPIOH_23_CLEAR (1 << 23) -#define GPIOH_24_CLEAR (1 << 24) -#define GPIOH_25_CLEAR (1 << 25) -#define GPIOH_26_CLEAR (1 << 26) -#define GPIOH_27_CLEAR (1 << 27) -#define GPIOH_28_CLEAR (1 << 28) -#define GPIOH_29_CLEAR (1 << 29) -#define GPIOH_30_CLEAR (1 << 30) -#define GPIOH_31_CLEAR (1 << 31) - -/* GPIO LOW Bank Bit Registers */ -#define GPIOL_OUTPUT_VALUE (0x00) -#define GPIOL_OUTPUT_ENABLE (0x04) -#define GPIOL_OUT_OPENDRAIN (0x08) -#define GPIOL_OUTPUT_INVERT_ENABLE (0x0C) -#define GPIOL_OUT_AUX1_SELECT (0x10) -#define GPIOL_OUT_AUX2_SELECT (0x14) -#define GPIOL_PULLUP_ENABLE (0x18) -#define GPIOL_PULLDOWN_ENABLE (0x1C) -#define GPIOL_INPUT_ENABLE (0x20) -#define GPIOL_INPUT_INVERT_ENABLE (0x24) -#define GPIOL_IN_FILTER_ENABLE (0x28) -#define GPIOL_IN_EVENTCOUNT_ENABLE (0x2C) -#define GPIOL_READ_BACK (0x30) -#define GPIOL_IN_AUX1_SELECT (0x34) -#define GPIOL_EVENTS_ENABLE (0x38) -#define GPIOL_LOCK_ENABLE (0x3C) -#define GPIOL_IN_POSEDGE_ENABLE (0x40) -#define GPIOL_IN_NEGEDGE_ENABLE (0x44) -#define GPIOL_IN_POSEDGE_STATUS (0x48) -#define GPIOL_IN_NEGEDGE_STATUS (0x4C) - -/* GPIO High Bank Bit Registers */ -#define GPIOH_OUTPUT_VALUE (0x80) -#define GPIOH_OUTPUT_ENABLE (0x84) -#define GPIOH_OUT_OPENDRAIN (0x88) -#define GPIOH_OUTPUT_INVERT_ENABLE (0x8C) -#define GPIOH_OUT_AUX1_SELECT (0x90) -#define GPIOH_OUT_AUX2_SELECT (0x94) -#define GPIOH_PULLUP_ENABLE (0x98) -#define GPIOH_PULLDOWN_ENABLE (0x9C) -#define GPIOH_INPUT_ENABLE (0xA0) -#define GPIOH_INPUT_INVERT_ENABLE (0xA4) -#define GPIOH_IN_FILTER_ENABLE (0xA8) -#define GPIOH_IN_EVENTCOUNT_ENABLE (0xAC) -#define GPIOH_READ_BACK (0xB0) -#define GPIOH_IN_AUX1_SELECT (0xB4) -#define GPIOH_EVENTS_ENABLE (0xB8) -#define GPIOH_LOCK_ENABLE (0xBC) -#define GPIOH_IN_POSEDGE_ENABLE (0xC0) -#define GPIOH_IN_NEGEDGE_ENABLE (0xC4) -#define GPIOH_IN_POSEDGE_STATUS (0xC8) -#define GPIOH_IN_NEGEDGE_STATUS (0xCC) - -/* Input Conditioning Function Registers */ -#define GPIO_00_FILTER_AMOUNT (0x50) -#define GPIO_00_FILTER_COUNT (0x52) -#define GPIO_00_EVENT_COUNT (0x54) -#define GPIO_00_EVENTCOMPARE_VALUE (0x56) -#define GPIO_01_FILTER_AMOUNT (0x58) -#define GPIO_01_FILTER_COUNT (0x5A) -#define GPIO_01_EVENT_COUNT (0x5C) -#define GPIO_01_EVENTCOMPARE_VALUE (0x5E) -#define GPIO_02_FILTER_AMOUNT (0x60) -#define GPIO_02_FILTER_COUNT (0x62) -#define GPIO_02_EVENT_COUNT (0x64) -#define GPIO_02_EVENTCOMPARE_VALUE (0x66) -#define GPIO_03_FILTER_AMOUNT (0x68) -#define GPIO_03_FILTER_COUNT (0x6A) -#define GPIO_03_EVENT_COUNT (0x6C) -#define GPIO_03_EVENTCOMPARE_VALUE (0x6E) -#define GPIO_04_FILTER_AMOUNT (0x70) -#define GPIO_04_FILTER_COUNT (0x72) -#define GPIO_04_EVENT_COUNT (0x74) -#define GPIO_04_EVENTCOMPARE_VALUE (0x76) -#define GPIO_05_FILTER_AMOUNT (0x78) -#define GPIO_05_FILTER_COUNT (0x7A) -#define GPIO_05_EVENT_COUNT (0x7C) -#define GPIO_05_EVENTCOMPARE_VALUE (0x7E) -#define GPIO_06_FILTER_AMOUNT (0xD0) -#define GPIO_06_FILTER_COUNT (0xD2) -#define GPIO_06_EVENT_COUNT (0xD4) -#define GPIO_06_EVENTCOMPARE_VALUE (0xD6) -#define GPIO_07_FILTER_AMOUNT (0xD8) -#define GPIO_07_FILTER_COUNT (0xDA) -#define GPIO_07_EVENT_COUNT (0xDC) -#define GPIO_07_EVENTCOMPARE_VALUE (0xDE) - -/* R/W GPIO Interrupt &PME Mapper Registers */ -#define GPIO_MAPPER_X (0xE0) -#define GPIO_MAPPER_Y (0xE4) -#define GPIO_MAPPER_Z (0xE8) -#define GPIO_MAPPER_W (0xEC) -#define GPIO_FE_SELECT_0 (0xF0) -#define GPIO_FE_SELECT_1 (0xF1) -#define GPIO_FE_SELECT_2 (0xF2) -#define GPIO_FE_SELECT_3 (0xF3) -#define GPIO_FE_SELECT_4 (0xF4) -#define GPIO_FE_SELECT_5 (0xF5) -#define GPIO_FE_SELECT_6 (0xF6) -#define GPIO_FE_SELECT_7 (0xF7) - -/* Event Counter Decrement Registers */ -#define GPIOL_IN_EVENT_DECREMENT (0xF8) -#define GPIOH_IN_EVENT_DECREMENT (0xFC) - -/* PMC register */ -#define PM_SSD (0x00) -#define PM_SCXA (0x04) -#define PM_SCYA (0x08) -#define PM_SODA (0x0C) -#define PM_SCLK (0x10) -#define PM_SED (0x14) -#define PM_SCXD (0x18) -#define PM_SCYD (0x1C) -#define PM_SIDD (0x20) -#define PM_WKD (0x30) -#define PM_WKXD (0x34) -#define PM_RD (0x38) -#define PM_WKXA (0x3C) -#define PM_FSD (0x40) -#define PM_TSD (0x44) -#define PM_PSD (0x48) -#define PM_NWKD (0x4C) -#define PM_AWKD (0x50) -#define PM_SSC (0x54) - -/* FLASH device macros */ -#define FLASH_TYPE_NONE 0 /* No flash device installed */ -#define FLASH_TYPE_NAND 1 /* NAND device */ -#define FLASH_TYPE_NOR 2 /* NOR device */ - -#define FLASH_IF_MEM 1 /* Memory or memory-mapped I/O interface for Flash device */ -#define FLASH_IF_IO 2 /* I/O interface for Flash device */ - -/* Flash Memory Mask values */ -#define FLASH_MEM_DEFAULT 0x00000000 -#define FLASH_MEM_4K 0xFFFFF000 -#define FLASH_MEM_8K 0xFFFFE000 -#define FLASH_MEM_16K 0xFFFFC000 -#define FLASH_MEM_128K 0xFFFE0000 -#define FLASH_MEM_512K 0xFFFC0000 -#define FLASH_MEM_4M 0xFFC00000 -#define FLASH_MEM_8M 0xFF800000 -#define FLASH_MEM_16M 0xFF000000 - -/* Flash IO Mask values */ -#define FLASH_IO_DEFAULT 0x00000000 -#define FLASH_IO_16B 0x0000FFF0 -#define FLASH_IO_32B 0x0000FFE0 -#define FLASH_IO_64B 0x0000FFC0 -#define FLASH_IO_128B 0x0000FF80 -#define FLASH_IO_256B 0x0000FF00 - -#if !defined(__ASSEMBLER__) -#if defined(__PRE_RAM__) -void cs5536_setup_onchipuart(int uart); -void cs5536_disable_internal_uart(void); -void cs5536_early_setup(void); - -void cs5536_enable_smbus(void); -int smbus_read_byte(unsigned int device, unsigned int address); -#else -void chipsetinit(void); -#endif -#endif - -#endif /* _CS5536_H */ diff --git a/src/southbridge/amd/cs5536/early_setup.c b/src/southbridge/amd/cs5536/early_setup.c deleted file mode 100644 index a95a0b4..0000000 --- a/src/southbridge/amd/cs5536/early_setup.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * cs5536_early_setup.c: Early chipset initialization for CS5536 companion device - * This file implements the initialization sequence documented in section 4.2 of - * AMD Geode GX Processor CS5536 Companion Device GeodeROM Porting Guide. - */ - -#include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/lxdef.h> -#include "cs5536.h" - -/** - * @brief Setup PCI IDSEL for CS5536 - */ -static void cs5536_setup_extmsr(void) -{ - msr_t msr; - - /* forward MSR access to CS5536_GLINK_PORT_NUM to CS5536_DEV_NUM */ - msr.hi = msr.lo = 0x00000000; -#if CS5536_GLINK_PORT_NUM <= 4 - msr.lo = CS5536_DEV_NUM << (unsigned char)((CS5536_GLINK_PORT_NUM - 1) * 8); -#else - msr.hi = CS5536_DEV_NUM << (unsigned char)((CS5536_GLINK_PORT_NUM - 5) * 8); -#endif - wrmsr(GLPCI_ExtMSR, msr); -} - -static void cs5536_setup_idsel(void) -{ - /* write IDSEL to the write once register at address 0x0000 */ - outl(0x1 << (CS5536_DEV_NUM + 10), 0); -} - -static void cs5536_usb_swapsif(void) -{ - msr_t msr; - - msr = rdmsr(USB1_SB_GLD_MSR_CAP + 0x5); - //USB Serial short detect bit. - if (msr.hi & 0x10) { - /* We need to preserve bits 32,33,35 and not clear any BIST - * error, but clear the SERSHRT error bit */ - - msr.hi &= 0xFFFFFFFB; - wrmsr(USB1_SB_GLD_MSR_CAP + 0x5, msr); - } -} - -static void cs5536_setup_iobase(void) -{ - msr_t msr; - /* setup LBAR for SMBus controller */ - msr.hi = 0x0000f001; - msr.lo = SMBUS_IO_BASE; - wrmsr(MDD_LBAR_SMB, msr); - - /* setup LBAR for GPIO */ - msr.hi = 0x0000f001; - msr.lo = GPIO_IO_BASE; - wrmsr(MDD_LBAR_GPIO, msr); - - /* setup LBAR for MFGPT */ - msr.hi = 0x0000f001; - msr.lo = MFGPT_IO_BASE; - wrmsr(MDD_LBAR_MFGPT, msr); - - /* setup LBAR for ACPI */ - msr.hi = 0x0000f001; - msr.lo = ACPI_IO_BASE; - wrmsr(MDD_LBAR_ACPI, msr); - - /* setup LBAR for PM Support */ - msr.hi = 0x0000f001; - msr.lo = PMS_IO_BASE; - wrmsr(MDD_LBAR_PMS, msr); -} - -static void cs5536_setup_power_button(void) -{ -#if IS_ENABLED(CONFIG_ENABLE_POWER_BUTTON) - outl(0x40020000, PMS_IO_BASE + 0x40); -#endif - - /* setup WORK_AUX/GPIO24, it is the external signal for 5536 - * vsb_work_aux controls all voltage rails except Vstandby & Vmem. - * We need to enable, OUT_AUX1 and OUTPUT_ENABLE in this order. - * If WORK_AUX/GPIO24 is not enabled then soft-off will not work. - */ - outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUT_AUX1_SELECT); - outl(GPIOH_24_SET, GPIO_IO_BASE + GPIOH_OUTPUT_ENABLE); - -} - -static void cs5536_setup_gpio(void) -{ - uint32_t val; - - /* setup GPIO pins 14/15 for SDA/SCL */ - val = GPIOL_15_SET | GPIOL_14_SET; - /* Output Enable */ - outl(val, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT); - /* Output AUX1 */ - outl(val, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); - /* Input Enable */ - outl(val, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT); - /* Input AUX1 */ - outl(val, GPIO_IO_BASE + GPIOL_INPUT_ENABLE); -} - -void cs5536_disable_internal_uart(void) -{ - msr_t msr; - /* The UARTs default to enabled. - * Disable and reset them and configure them later. (SIO init) - */ - msr = rdmsr(MDD_UART1_CONF); - msr.lo = 1; // reset - wrmsr(MDD_UART1_CONF, msr); - msr.lo = 0; // disabled - wrmsr(MDD_UART1_CONF, msr); - - msr = rdmsr(MDD_UART2_CONF); - msr.lo = 1; // reset - wrmsr(MDD_UART2_CONF, msr); - msr.lo = 0; // disabled - wrmsr(MDD_UART2_CONF, msr); -} - -static void cs5536_setup_cis_mode(void) -{ - msr_t msr; - - /* Setup CPU serial SouthBridge interface to mode C. */ - msr = rdmsr(GLPCI_SB_CTRL); - msr.lo &= ~0x18; - msr.lo |= 0x10; - wrmsr(GLPCI_SB_CTRL, msr); -} - -/** - * Enable the on-chip UART. - * - * See page 412 of the AMD Geode CS5536 Companion Device data book. - */ -static void cs5536_setup_onchipuart1(void) -{ - msr_t msr; - - /* Setup early for polling only mode. - * 1. Enable GPIO 8 to OUT_AUX1, 9 to IN_AUX1. - * GPIO LBAR + 0x04, LBAR + 0x10, LBAR + 0x20, LBAR + 34 - * 2. Enable UART I/O space in MDD. - * MSR 0x51400014 bit 18:16 - * 3. Enable UART controller. - * MSR 0x5140003A bit 0, 1 - */ - - /* GPIO8 - UART1_TX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); - /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_8_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT); - - /* GPIO9 - UART1_RX */ - /* Set: Input Enable (0x20) */ - outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE); - /* Set: INAUX1 Select (0x34) */ - outl(GPIOL_9_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT); - - /* Set address to 0x3F8. */ - msr = rdmsr(MDD_LEG_IO); - msr.lo |= 0x7 << 16; - wrmsr(MDD_LEG_IO, msr); - - /* Bit 1 = DEVEN (device enable) - * Bit 4 = EN_BANKS (allow access to the upper banks) - */ - msr.lo = (1 << 4) | (1 << 1); - msr.hi = 0; - - /* Enable COM1. */ - wrmsr(MDD_UART1_CONF, msr); -} - -static void cs5536_setup_onchipuart2(void) -{ - msr_t msr; - - /* GPIO4 - UART2_TX */ - /* Set: Output Enable (0x4) */ - outl(GPIOL_4_SET, GPIO_IO_BASE + GPIOL_OUTPUT_ENABLE); - /* Set: OUTAUX1 Select (0x10) */ - outl(GPIOL_4_SET, GPIO_IO_BASE + GPIOL_OUT_AUX1_SELECT); - /* GPIO4 - UART2_RX */ - /* Set: Input Enable (0x20) */ - outl(GPIOL_3_SET, GPIO_IO_BASE + GPIOL_INPUT_ENABLE); - /* Set: INAUX1 Select (0x34) */ - outl(GPIOL_3_SET, GPIO_IO_BASE + GPIOL_IN_AUX1_SELECT); - - /* Set: GPIO 3 + 3 Pull Up (0x18) */ - outl(GPIOL_3_SET | GPIOL_4_SET, - GPIO_IO_BASE + GPIOL_PULLUP_ENABLE); - - /* set address to 2F8 */ - msr = rdmsr(MDD_LEG_IO); - msr.lo |= 0x5 << 20; - wrmsr(MDD_LEG_IO, msr); - - /* Bit 1 = DEVEN (device enable) - * Bit 4 = EN_BANKS (allow access to the upper banks - */ - msr.lo = (1 << 4) | (1 << 1); - msr.hi = 0; - - /* enable COM2 */ - wrmsr(MDD_UART2_CONF, msr); -} - -void cs5536_setup_onchipuart(int uart) -{ - switch (uart) { - case 1: - cs5536_setup_onchipuart1(); - break; - case 2: - cs5536_setup_onchipuart2(); - break; - } -} - - -/* note: you can't do prints in here in most cases, - * and we don't want to hang on serial, so they are - * commented out - */ -void cs5536_early_setup(void) -{ - msr_t msr; - - cs5536_setup_extmsr(); - cs5536_setup_cis_mode(); - - msr = rdmsr(GLCP_SYS_RSTPLL); - if (msr.lo & (0x3f << 26)) { - /* PLL is already set and we are reboot from PLL reset */ - //printk(BIOS_DEBUG, "reboot from BIOS reset\n"); - return; - } - //printk(BIOS_DEBUG, "Setup idsel\n"); - cs5536_setup_idsel(); - //printk(BIOS_DEBUG, "Setup iobase\n"); - cs5536_usb_swapsif(); - cs5536_setup_iobase(); - //printk(BIOS_DEBUG, "Setup gpio\n"); - cs5536_setup_gpio(); - //printk(BIOS_DEBUG, "Setup smbus\n"); - cs5536_enable_smbus(); - //printk(BIOS_DEBUG, "Setup power button\n"); - cs5536_setup_power_button(); -} diff --git a/src/southbridge/amd/cs5536/early_smbus.c b/src/southbridge/amd/cs5536/early_smbus.c deleted file mode 100644 index a1cf50b..0000000 --- a/src/southbridge/amd/cs5536/early_smbus.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/io.h> -#include "cs5536.h" -#include "smbus.h" - -/* initialization for SMBus Controller */ -void cs5536_enable_smbus(void) -{ - - if (IS_ENABLED(CONFIG_NO_EARLY_SMBUS)) - return; - - /* Set SCL freq and enable SMB controller */ - /*outb((0x20 << 1) | SMB_CTRL2_ENABLE, smbus_io_base + SMB_CTRL2); */ - outb((0x7F << 1) | SMB_CTRL2_ENABLE, SMBUS_IO_BASE + SMB_CTRL2); - - /* Setup SMBus host controller address to 0xEF */ - outb((0xEF | SMB_ADD_SAEN), SMBUS_IO_BASE + SMB_ADD); - -} - -int smbus_read_byte(unsigned int device, unsigned int address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address); -} diff --git a/src/southbridge/amd/cs5536/ide.c b/src/southbridge/amd/cs5536/ide.c deleted file mode 100644 index 53723e6..0000000 --- a/src/southbridge/amd/cs5536/ide.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "cs5536.h" - -#define IDE_CFG 0x40 - #define CHANEN (1L << 1) - #define PWB (1L << 14) - #define CABLE (1L << 16) -#define IDE_DTC 0x48 -#define IDE_CAST 0x4C -#define IDE_ETC 0x50 - -static void ide_init(struct device *dev) -{ - uint32_t ide_cfg; - - printk(BIOS_SPEW, "cs5536_ide: %s\n", __func__); - /* GPIO and IRQ setup are handled in the main chipset code. */ - - // Enable the channel and Post Write Buffer - // NOTE: Only 32-bit writes to the data buffer are allowed when PWB is set - ide_cfg = pci_read_config32(dev, IDE_CFG); - ide_cfg |= CHANEN | PWB; - pci_write_config32(dev, IDE_CFG, ide_cfg); -} - -static struct device_operations ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = ide_init, - .enable = 0, -}; - -static const struct pci_driver ide_driver __pci_driver = { - .ops = &ide_ops, - .vendor = PCI_VENDOR_ID_AMD, - .device = PCI_DEVICE_ID_AMD_CS5536_B0_IDE, -}; diff --git a/src/southbridge/amd/cs5536/pirq.c b/src/southbridge/amd/cs5536/pirq.c deleted file mode 100644 index 75bb168..0000000 --- a/src/southbridge/amd/cs5536/pirq.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Nikolay Petukhov nikolay.petukhov@gmail.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <arch/pirq_routing.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -#if IS_ENABLED(CONFIG_PIRQ_ROUTE) && IS_ENABLED(CONFIG_GENERATE_PIRQ_TABLE) -void pirq_assign_irqs(const unsigned char pIntAtoD[4]) -{ - struct device *pdev; - - pdev = dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0); - - if (pdev) { - pci_write_config16(pdev, 0x5c, (pIntAtoD[3] << 12 - | pIntAtoD[2] << 8 | pIntAtoD[1] << 4 | pIntAtoD[0])); - } -} -#endif diff --git a/src/southbridge/amd/cs5536/smbus.c b/src/southbridge/amd/cs5536/smbus.c deleted file mode 100644 index ddbcdf2..0000000 --- a/src/southbridge/amd/cs5536/smbus.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/io.h> -#include "cs5536.h" -#include "smbus.h" - -#define SMBUS_TIMEOUT (1000) - -static void smbus_delay(void) -{ - /* inb(0x80); */ -} - -static int smbus_wait(unsigned smbus_io_base) -{ - unsigned long loops = SMBUS_TIMEOUT; - unsigned char val; - - do { - smbus_delay(); - val = inb(smbus_io_base + SMB_STS); - if ((val & SMB_STS_SDAST) != 0) - break; - if (val & (SMB_STS_BER | SMB_STS_NEGACK)) { - /*printk(BIOS_DEBUG, "SMBUS WAIT ERROR %x\n", val); */ - return SMBUS_ERROR; - } - } while (--loops); - return loops ? 0 : SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -/* generate a smbus start condition */ -int smbus_start_condition(unsigned smbus_io_base) -{ - unsigned char val; - - /* issue a START condition */ - val = inb(smbus_io_base + SMB_CTRL1); - outb(val | SMB_CTRL1_START, smbus_io_base + SMB_CTRL1); - - /* check for bus conflict */ - val = inb(smbus_io_base + SMB_STS); - if ((val & SMB_STS_BER) != 0) - return SMBUS_ERROR; - - return smbus_wait(smbus_io_base); -} - -int smbus_check_stop_condition(unsigned smbus_io_base) -{ - unsigned char val; - unsigned long loops; - loops = SMBUS_TIMEOUT; - /* check for SDA status */ - do { - smbus_delay(); - val = inb(smbus_io_base + SMB_CTRL1); - if ((val & SMB_CTRL1_STOP) == 0) { - break; - } - outb((0x7F << 1) | SMB_CTRL2_ENABLE, smbus_io_base + SMB_CTRL2); - } while (--loops); - return loops ? 0 : SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -int smbus_stop_condition(unsigned smbus_io_base) -{ - outb(SMB_CTRL1_STOP, smbus_io_base + SMB_CTRL1); - return smbus_wait(smbus_io_base); -} - -static int smbus_ack(unsigned smbus_io_base, int state) -{ - unsigned char val = inb(smbus_io_base + SMB_CTRL1); - -/* if (state) */ - outb(val | SMB_CTRL1_ACK, smbus_io_base + SMB_CTRL1); -/* else - outb(val & ~SMB_CTRL1_ACK, smbus_io_base + SMB_CTRL1); -*/ - return 0; -} - -int smbus_send_slave_address(unsigned smbus_io_base, - unsigned char device) -{ - unsigned char val; - - /* send the slave address */ - outb(device, smbus_io_base + SMB_SDA); - - /* check for bus conflict and NACK */ - val = inb(smbus_io_base + SMB_STS); - if (((val & SMB_STS_BER) != 0) || ((val & SMB_STS_NEGACK) != 0)) { - /* printk(BIOS_DEBUG, "SEND SLAVE ERROR (%x)\n", val); */ - return SMBUS_ERROR; - } - return smbus_wait(smbus_io_base); -} - -int smbus_send_command(unsigned smbus_io_base, unsigned char command) -{ - unsigned char val; - - /* send the command */ - outb(command, smbus_io_base + SMB_SDA); - - /* check for bus conflict and NACK */ - val = inb(smbus_io_base + SMB_STS); - if (((val & SMB_STS_BER) != 0) || ((val & SMB_STS_NEGACK) != 0)) - return SMBUS_ERROR; - - return smbus_wait(smbus_io_base); -} - -static unsigned char smbus_get_result(unsigned smbus_io_base) -{ - return inb(smbus_io_base + SMB_SDA); -} - -unsigned char do_smbus_read_byte(unsigned smbus_io_base, - unsigned char device, - unsigned char address) -{ - unsigned char error = 0; - - if ((smbus_check_stop_condition(smbus_io_base))) { - error = 1; - goto err; - } - - if ((smbus_start_condition(smbus_io_base))) { - error = 2; - goto err; - } - - if ((smbus_send_slave_address(smbus_io_base, device << 1))) { - error = 3; - goto err; - } - - smbus_ack(smbus_io_base, 1); - - if ((smbus_send_command(smbus_io_base, address))) { - error = 4; - goto err; - } - - if ((smbus_start_condition(smbus_io_base))) { - error = 5; - goto err; - } - - if ((smbus_send_slave_address(smbus_io_base, (device << 1) | 0x01))) { - error = 6; - goto err; - } - - if ((smbus_stop_condition(smbus_io_base))) { - error = 7; - goto err; - } - - return smbus_get_result(smbus_io_base); - -err: - printk(BIOS_DEBUG, "SMBUS READ ERROR: %02x device: %02x\n", error, device); - /* stop, clean up the error, and leave */ - smbus_stop_condition(smbus_io_base); - outb(inb(smbus_io_base + SMB_STS), smbus_io_base + SMB_STS); - outb(0x0, smbus_io_base + SMB_STS); - return 0xFF; -} diff --git a/src/southbridge/amd/cs5536/smbus.h b/src/southbridge/amd/cs5536/smbus.h deleted file mode 100644 index 3d67ace..0000000 --- a/src/southbridge/amd/cs5536/smbus.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _CS5536_SMBUS_H -#define _CS5536_SMBUS_H - -#include <device/smbus_def.h> - -int smbus_start_condition(unsigned smbus_io_base); -int smbus_stop_condition(unsigned smbus_io_base); -int smbus_check_stop_condition(unsigned smbus_io_base); -int smbus_send_slave_address(unsigned smbus_io_base, - unsigned char device); -int smbus_send_command(unsigned smbus_io_base, unsigned char command); - -unsigned char do_smbus_read_byte(unsigned smbus_io_base, - unsigned char device, - unsigned char address); - -#endif /* _CS5536_SMBUS_H */