Ricardo Ribalda has uploaded this change for review.
mb/google/hatch/jinlon: Describe the privacy_gpio
Add information regarding the privacy pin on the overridetree and gpio.
Change-Id: Ifa628dda03f3f65976850aeabaf516f528a921b7
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
M src/mainboard/google/hatch/variants/jinlon/gpio.c
M src/mainboard/google/hatch/variants/jinlon/overridetree.cb
2 files changed, 12 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/46962/1
diff --git a/src/mainboard/google/hatch/variants/jinlon/gpio.c b/src/mainboard/google/hatch/variants/jinlon/gpio.c
index 88f0092..3b6a76f 100644
--- a/src/mainboard/google/hatch/variants/jinlon/gpio.c
+++ b/src/mainboard/google/hatch/variants/jinlon/gpio.c
@@ -18,6 +18,8 @@
* using this pin, expose this pin to driver.
*/
PAD_CFG_GPO(GPP_C15, 1, DEEP),
+ /* D4 : Camera Privacy Status */
+ PAD_CFG_GPI(GPP_D4, NONE, DEEP),
/* E0 : View Angle Management */
PAD_CFG_GPO(GPP_E0, 0, DEEP),
/* F3 : MEM_STRAP_3 */
diff --git a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb
index fc3bb85..22cc5d3 100644
--- a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb
@@ -80,6 +80,16 @@
device generic 0 on end
end
end # Integrated Graphics Device
+ device pci 14.0 on
+ chip drivers/usb/acpi
+ device usb 0.0 on
+ chip drivers/usb/acpi
+ register "privacy_gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_D4)"
+ device usb 2.6 on end
+ end
+ end
+ end
+ end # USB xHCI
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
To view, visit change 46962. To unsubscribe, or for help writing mail filters, visit settings.