Michael Niewöhner uploaded patch set #21 to this change.
drivers/ipmi: add code to set BMC/IPMI enablement from jumper
Some boards, like the Supermicro X11SSM-F, have a jumper for enabling or
disabling the BMC and IPMI. Add a new devicetree driver option to set
the GPIO used for the jumper and enable or disable IPMI according to its
value.
This gets used in the follow-up change by Supermicro X11SSM-F.
Test: Boot with jumper set to each enabled and disabled and see if IPMI
gets enabled. Successfully tested on Supermicro X11SSM-F.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: Icde3232843a7138797a4b106560f170972edeb9c
---
M src/drivers/ipmi/chip.h
M src/drivers/ipmi/ipmi_kcs_ops.c
2 files changed, 28 insertions(+), 5 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/94/48094/21
To view, visit change 48094. To unsubscribe, or for help writing mail filters, visit settings.