9 comments:
File src/soc/mediatek/mt8192/include/soc/pmif_spi.h:
PMIC_BASE = 0x0000,
PMIC_SMT_CON1 = PMIC_BASE + 0x0032,
PMIC_DRV_CON1 = PMIC_BASE + 0x003a,
PMIC_FILTER_CON0 = PMIC_BASE + 0x0042,
PMIC_GPIO_PULLEN0_CLR = PMIC_BASE + 0x0098,
PMIC_RG_SPI_CON0 = PMIC_BASE + 0x0408,
PMIC_DEW_DIO_EN = PMIC_BASE + 0x040c,
PMIC_DEW_READ_TEST = PMIC_BASE + 0x040e,
PMIC_DEW_WRITE_TEST = PMIC_BASE + 0x0410,
PMIC_DEW_CRC_EN = PMIC_BASE + 0x0414,
PMIC_DEW_CRC_VAL = PMIC_BASE + 0x0416,
PMIC_DEW_RDDMY_NO = PMIC_BASE + 0x0424,
PMIC_RG_SPI_CON2 = PMIC_BASE + 0x0426,
PMIC_SPISLV_KEY = PMIC_BASE + 0x044a,
PMIC_INT_STA = PMIC_BASE + 0x0452,
PMIC_AUXADC_ADC7 = PMIC_BASE + 0x1096,
PMIC_AUXADC_ADC10 = PMIC_BASE + 0x109c,
PMIC_AUXADC_RQST0 = PMIC_BASE + 0x1108,
Please use either tabs or spaces for alignment.
Done
File src/soc/mediatek/mt8192/include/soc/pmif_sw.h:
(0x00)
#define SWINF_FSM_REQ (0x02)
#define SWINF_FSM_WFDLE (0x04)
#define SWINF_FSM_WFVLDCLR (0x06)
#define SWINF_INIT_DONE (0x01)
no need to add () if this is a single number
Done
always quote x as (x) if you're going to apply operations on it.
Done
File src/soc/mediatek/mt8192/pmif_clk.c:
Patch Set #14, Line 146: PROJECT_CODE, 0xb16);
align with the ( above. […]
Done
Patch Set #14, Line 163: PMIC_CG_MD
align with the ( above
Done
align with the ( above
Done
Patch Set #14, Line 174: PMIC_WRAP_SWRST
align with the ( above
Done
Patch Set #14, Line 176: PMIC_WRAP_SWRST
align with the ( above
Done
Patch Set #14, Line 180: PMIC_CG_MD
align with the ( above
Done
To view, visit change 45398. To unsubscribe, or for help writing mail filters, visit settings.