Evgeny Zinoviev has uploaded this change for review.

View Change

Doc/mb/lenovo/montevina_series: Use Makefile to generate IFD

util/bincfg's Makefile already has target that generates flash
descriptor. Use it instea.

Change-Id: I1756514e1ab7b64de23a98314d8a32e9258e648c
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
---
M Documentation/mainboard/lenovo/montevina_series.md
1 file changed, 4 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/39762/1

diff --git a/Documentation/mainboard/lenovo/montevina_series.md b/Documentation/mainboard/lenovo/montevina_series.md
index 62e8796..45f2af4 100644
--- a/Documentation/mainboard/lenovo/montevina_series.md
+++ b/Documentation/mainboard/lenovo/montevina_series.md
@@ -103,9 +103,11 @@
 
 Then create the flash descriptor:
 ```console
-$ ./bincfg ifd-x200.spec ifd-x200.set ifd.bin
+$ make gen-ifd-x200
 ```
 
+It will be saved to the `flashregion_0_fd.bin` file.
+
 #### Configuring coreboot
 
 Now configure coreboot. You need to select correct chip size and specify paths
@@ -118,7 +120,7 @@
 
 Chipset --->
     [*] Add Intel descriptor.bin file
-    # Note: if you used bincfg, specify path to generated util/bincfg/ifd.bin
+    # Note: if you used bincfg, specify path to generated util/bincfg/flashregion_0_fd.bin
     (/path/to/flashregion_0_flashdescriptor.bin) Path and filename of the descriptor.bin file
 
     [*] Add gigabit ethernet configuration

To view, visit change 39762. To unsubscribe, or for help writing mail filters, visit settings.