20 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.


mb/google/nissa/var/anraggar: Add cbj_sleeve to control mic jack

Add a new GPIO port cbj-sleeve for kernel driver to call. At the same
time, a new rt5645 driver is added to replace the generic driver to
parse gpio. After entering the system, it is pulled high by the kernel
to enable the MIC function.

BUG=None
TEST=MIC function is normal

Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/mainboard/google/brya/Kconfig
M src/mainboard/google/brya/variants/anraggar/overridetree.cb
2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig
index 517e4bc..1e10d40 100644
--- a/src/mainboard/google/brya/Kconfig
+++ b/src/mainboard/google/brya/Kconfig
@@ -8,6 +8,7 @@
 	select DRIVERS_I2C_GENERIC
 	select DRIVERS_I2C_HID
 	select DRIVERS_I2C_NAU8825
+	select DRIVERS_I2C_RT5645
 	select DRIVERS_INTEL_DPTF
 	select DRIVERS_INTEL_DPTF_SUPPORTS_TPCH
 	select DRIVERS_INTEL_PMC
diff --git a/src/mainboard/google/brya/variants/anraggar/overridetree.cb b/src/mainboard/google/brya/variants/anraggar/overridetree.cb
index c7942c1..2f5b1d2 100644
--- a/src/mainboard/google/brya/variants/anraggar/overridetree.cb
+++ b/src/mainboard/google/brya/variants/anraggar/overridetree.cb
@@ -348,15 +348,13 @@
 			end
 		end
 		device ref i2c3 on
-			chip drivers/i2c/generic
+			chip drivers/i2c/rt5645
 				register "hid" = ""10EC5650""
 				register "name" = ""RT58""
 				register "desc" = ""Realtek RT5650""
 				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
-				register "property_count" = "1"
-				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
-				register "property_list[0].name" = ""realtek,jd-mode""
-				register "property_list[0].integer" = "2"
+				register "cbj_sleeve" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				register "jd_mode" = "2"
 				device i2c 1a on end
 			end
 		end

