Kyösti Mälkki has uploaded this change for review.

View Change

drivers/i2c/adm1026: Drop unused hardware monitor support

Change-Id: I4e2ebe4f2a90cc27f9a4de907b873df44718234d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
---
D src/drivers/i2c/adm1026/Kconfig
D src/drivers/i2c/adm1026/Makefile.inc
D src/drivers/i2c/adm1026/adm1026.c
3 files changed, 0 insertions(+), 74 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/38156/1

diff --git a/src/drivers/i2c/adm1026/Kconfig b/src/drivers/i2c/adm1026/Kconfig
deleted file mode 100644
index 8168b29..0000000
--- a/src/drivers/i2c/adm1026/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-config DRIVERS_I2C_ADM1026
-	bool
diff --git a/src/drivers/i2c/adm1026/Makefile.inc b/src/drivers/i2c/adm1026/Makefile.inc
deleted file mode 100644
index 7652a75..0000000
--- a/src/drivers/i2c/adm1026/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-$(CONFIG_DRIVERS_I2C_ADM1026) += adm1026.c
diff --git a/src/drivers/i2c/adm1026/adm1026.c b/src/drivers/i2c/adm1026/adm1026.c
deleted file mode 100644
index c1bd905..0000000
--- a/src/drivers/i2c/adm1026/adm1026.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/smbus.h>
-
-#define ADM1026_DEVICE 0x2d	/* Either 0x2c or 0x2d or 0x2e */
-#define ADM1026_REG_CONFIG1 0x00
-#define CFG1_MONITOR     0x01
-#define CFG1_INT_ENABLE  0x02
-#define CFG1_INT_CLEAR   0x04
-#define CFG1_AIN8_9      0x08
-#define CFG1_THERM_HOT   0x10
-#define CFT1_DAC_AFC     0x20
-#define CFG1_PWM_AFC     0x40
-#define CFG1_RESET       0x80
-#define ADM1026_REG_CONFIG2 0x01
-#define ADM1026_REG_CONFIG3 0x07
-
-static void adm1026_enable_monitoring(struct device *dev)
-{
-	int result;
-	result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
-
-	result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET);
-	result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result);
-
-	result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
-	if (!(result & CFG1_MONITOR)) {
-		printk(BIOS_DEBUG, "ADM1026: monitoring would not enable");
-	}
-}
-
-static void adm1026_init(struct device *dev)
-{
-	if (dev->enabled && dev->path.type == DEVICE_PATH_I2C) {
-		if (ops_smbus_bus(get_pbus_smbus(dev))) {
-			if (dev->bus->dev->path.type == DEVICE_PATH_I2C)
-				smbus_set_link(dev);	// it is under mux
-			adm1026_enable_monitoring(dev);
-		}
-	}
-}
-
-static struct device_operations adm1026_operations = {
-	.read_resources = DEVICE_NOOP,
-	.set_resources = DEVICE_NOOP,
-	.enable_resources = DEVICE_NOOP,
-	.init = adm1026_init,
-};
-
-static void enable_dev(struct device *dev)
-{
-	dev->ops = &adm1026_operations;
-}
-
-struct chip_operations drivers_i2c_adm1026_ops = {
-	CHIP_NAME("adm1026")
-	.enable_dev = enable_dev,
-};

To view, visit change 38156. To unsubscribe, or for help writing mail filters, visit settings.