Ravi kumar uploaded patch set #31 to this change.

View Change

sc7180: Add display hardware pipe line initialization

Add sc7180 display hardware pipeline programming support
and invoke the display initialization from soc_init.

Changes in V1:
- added display init required check.
- added edid read function using i2c communication.
- added sn65dsi86 bridge driver to init bridge.
- moved display initialization to mainboard file.

Changes in V2:
- moved diplay init sequence to mainboard file
- moved edid read function to bridge driver.
- calculated timing paramters using edid parameters.
- removed command mode config code.
- moved bridge driver to drivers/ti.
- seperated out bridge and soc code with mainboard file as interface.

Changes in V3:
- add GPIO selection at runtime based on boardid.
- add vbif register struct overlay.

Changes in V4:
- update gpio config for lazor board.

Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e
Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org>
---
M src/mainboard/google/trogdor/board.h
M src/mainboard/google/trogdor/mainboard.c
M src/soc/qualcomm/sc7180/Kconfig
M src/soc/qualcomm/sc7180/Makefile.inc
A src/soc/qualcomm/sc7180/display/mdss.c
5 files changed, 257 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/15/39615/31

To view, visit change 39615. To unsubscribe, or for help writing mail filters, visit settings.