Arthur Heymans has uploaded this change for review.
sb/intel/lynxpoint: Use common final SPI OPs setup
Change-Id: I12e238b3a33c909103986822bd7398e1c3bac676
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
---
M src/southbridge/intel/lynxpoint/lpc.c
1 file changed, 2 insertions(+), 4 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/39/33039/1
diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c
index b0f57c1..4efb83e 100644
--- a/src/southbridge/intel/lynxpoint/lpc.c
+++ b/src/southbridge/intel/lynxpoint/lpc.c
@@ -36,6 +36,7 @@
#include <drivers/intel/gma/i915.h>
#include <southbridge/intel/common/acpi_pirq_gen.h>
#include <southbridge/intel/common/rtc.h>
+#include <southbridge/intel/common/spi.h>
#define NMI_OFF 0
@@ -960,10 +961,7 @@
static void lpc_final(struct device *dev)
{
- RCBA16(0x3894) = SPI_OPPREFIX;
- RCBA16(0x3896) = SPI_OPTYPE;
- RCBA32(0x3898) = SPI_OPMENU_LOWER;
- RCBA32(0x389c) = SPI_OPMENU_UPPER;
+ spi_finalize_ops();
if (acpi_is_wakeup_s3() || CONFIG(INTEL_CHIPSET_LOCKDOWN))
outb(APM_CNT_FINALIZE, APM_CNT);
To view, visit change 33039. To unsubscribe, or for help writing mail filters, visit settings.