Felix Held has uploaded this change for review.
soc/amd/cezanne/Makefile: pass APOB NV parameters to amdfwtool
BUG=b:181766974
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I99d5984da82cfc98a106fc5c27e32fdc3cc13b3b
---
M src/soc/amd/cezanne/Makefile.inc
1 file changed, 9 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/51266/1
diff --git a/src/soc/amd/cezanne/Makefile.inc b/src/soc/amd/cezanne/Makefile.inc
index 16b69f3..1aeb527 100644
--- a/src/soc/amd/cezanne/Makefile.inc
+++ b/src/soc/amd/cezanne/Makefile.inc
@@ -107,6 +107,11 @@
PSP_BIOSBIN_SIZE=$(shell $(READELF_bootblock) -l $(PSP_ELF_FILE) | grep LOAD | awk '{print $$5}')
PSP_BIOSBIN_DEST=$(shell $(READELF_bootblock) -l $(PSP_ELF_FILE) | grep LOAD | awk '{print $$3}')
+# type = 0x63 - construct APOB NV base/size from flash map
+# The flashmap section used for this is expected to be named RW_MRC_CACHE
+APOB_NV_SIZE=$(shell grep "FMAP_SECTION_RW_MRC_CACHE_SIZE" $(obj)/fmap_config.h | awk '{print $$(NF)}')
+APOB_NV_BASE=$(shell grep "FMAP_SECTION_RW_MRC_CACHE_START" $(obj)/fmap_config.h | awk '{print $$(NF)}')
+
# type = 0xb - See #55758 (NDA) for bit definitions.
PSP_SOFTFUSE_BITS += 28 6
@@ -134,6 +139,8 @@
OPT_PSP_BIOSBIN_DEST=$(call add_opt_prefix, $(PSP_BIOSBIN_DEST), --bios-bin-dest)
OPT_PSP_BIOSBIN_SIZE=$(call add_opt_prefix, $(PSP_BIOSBIN_SIZE), --bios-uncomp-size)
+OPT_APOB_NV_SIZE=$(call add_opt_prefix, $(APOB_NV_SIZE), --apob-nv-size)
+OPT_APOB_NV_BASE=$(call add_opt_prefix, $(APOB_NV_BASE),--apob-nv-base)
OPT_EFS_SPI_READ_MODE=$(call add_opt_prefix, $(CONFIG_EFS_SPI_READ_MODE), --spi-read-mode)
OPT_EFS_SPI_SPEED=$(call add_opt_prefix, $(CONFIG_EFS_SPI_SPEED), --spi-speed)
OPT_EFS_SPI_MICRON_FLAG=$(call add_opt_prefix, $(CONFIG_EFS_SPI_MICRON_FLAG), --spi-micron-flag)
@@ -175,6 +182,8 @@
@printf " AMDFWTOOL $(subst $(obj)/,,$(@))\n"
$(AMDFWTOOL) \
$(AMDFW_COMMON_ARGS) \
+ $(OPT_APOB_NV_SIZE) \
+ $(OPT_APOB_NV_BASE) \
--location $(shell printf "%#x" $(CEZANNE_FWM_POSITION)) \
--multilevel \
--output $@
To view, visit change 51266. To unsubscribe, or for help writing mail filters, visit settings.