Patrick Rudolph has uploaded this change for review.

View Change

soc/intel/apollolake/Kconfig: Add CONSOLE_UART_BASE_ADDRESS

Set CONSOLE_UART_BASE_ADDRESS for SoC's internal UART.
Allows to build SeaBios without manually specifying the MMIO address.

Tested on Up squared: The serial works in SeaBios.

Change-Id: I32c18aa6f767cfaf14e3b86796d7d7a32ff1d3d5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
---
M src/soc/intel/apollolake/Kconfig
1 file changed, 8 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/65/33065/1

diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index 217d1ea..bce276c 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -361,6 +361,14 @@
 	int
 	default 100
 
+config CONSOLE_UART_BASE_ADDRESS
+	hex
+	default 0xddffc000 if UART_FOR_CONSOLE = 0
+	default 0xddffe000 if UART_FOR_CONSOLE = 1
+	default 0xde000000 if UART_FOR_CONSOLE = 2
+	depends on DRIVERS_UART_8250MEM_32
+	depends on CONSOLE_SERIAL
+
 config APL_SKIP_SET_POWER_LIMITS
 	bool
 	default n

To view, visit change 33065. To unsubscribe, or for help writing mail filters, visit settings.