Felix Singer has uploaded this change for review.
mb/*: Remove SATA_AHCI config from SKL/KBL based devicetrees
SATA_AHCI is already the default mode for SKL/KBL based platforms.
Therefore, remove its configuration from all related devicetrees.
Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains
identical.
Change-Id: Ib5222c1b0314365b634f8585e8a97e0054127fe9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
---
M src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
M src/mainboard/kontron/bsl6/devicetree.cb
M src/mainboard/supermicro/x11-lga1151-series/devicetree.cb
3 files changed, 0 insertions(+), 3 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/48378/1
diff --git a/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb b/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
index f65a3d3..a223b7e 100644
--- a/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
+++ b/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
@@ -80,7 +80,6 @@
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 on # SATA
- register "SataMode" = "SATA_AHCI"
register "SataSalpSupport" = "0"
# Ports
register "SataPortsEnable[0]" = "1"
diff --git a/src/mainboard/kontron/bsl6/devicetree.cb b/src/mainboard/kontron/bsl6/devicetree.cb
index 9b3b8bf..6bdfcaf 100644
--- a/src/mainboard/kontron/bsl6/devicetree.cb
+++ b/src/mainboard/kontron/bsl6/devicetree.cb
@@ -95,7 +95,6 @@
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 17.0 on # SATA
- register "SataMode" = "SATA_AHCI"
register "SataSalpSupport" = "1"
register "SataPortsEnable[0]" = "1"
register "SataPortsEnable[1]" = "1"
diff --git a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb
index 422cd84..76aec3f 100644
--- a/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb
+++ b/src/mainboard/supermicro/x11-lga1151-series/devicetree.cb
@@ -5,7 +5,6 @@
register "SaGv" = "SaGv_Disabled"
# SATA configuration
- register "SataMode" = "SATA_AHCI"
register "SataSalpSupport" = "1"
register "SataPortsEnable" = "{ \
[0] = 1, \
To view, visit change 48378. To unsubscribe, or for help writing mail filters, visit settings.