Tony Huang has uploaded this change for review.

View Change

mb/google/puff/var/dooly: Update devicetree to remove unused devices

Remove unused device in Dooly
  no SD card reader
  no built-in LAN

BUG=b:170273526
BRANCH=puff
TEST=Build and check DUT function status

Change-Id: I8ab1e156031bfb4d5ea30048d8a10400f2a49411
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
---
M src/mainboard/google/hatch/variants/dooly/overridetree.cb
1 file changed, 1 insertion(+), 19 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/88/46288/1

diff --git a/src/mainboard/google/hatch/variants/dooly/overridetree.cb b/src/mainboard/google/hatch/variants/dooly/overridetree.cb
index 9d7cf1f..21bbc3c 100644
--- a/src/mainboard/google/hatch/variants/dooly/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/dooly/overridetree.cb
@@ -149,9 +149,6 @@
 		},
 	}"
 
-	# PCIe port 7 for LAN
-	register "PcieRpEnable[6]" = "1"
-	register "PcieRpLtrEnable[6]" = "1"
 	# PCIe port 11 (x2) for NVMe hybrid storage devices
 	register "PcieRpEnable[10]" = "1"
 	register "PcieRpLtrEnable[10]" = "1"
@@ -159,9 +156,6 @@
 	register "PcieClkSrcUsage[0]" = "6"
 	register "PcieClkSrcClkReq[0]" = "0"
 
-	# GPIO for SD card detect
-	register "sdcard_cd_gpio" = "vSD3_CD_B"
-
 	# SATA port 1 Gen3 Strength
 	# Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB
 	register "sata_port[1].TxGen3DeEmphEnable" = "1"
@@ -304,6 +298,7 @@
 				end
 			end
 		end # USB xHCI
+		device pci 14.5 off end # SDCard
 		device pci 15.0 off
 			# RFU - Reserved for Future Use.
 		end # I2C #0
@@ -340,19 +335,6 @@
 			end
 		end #I2C #4
 		device pci 1a.0 on  end # eMMC
-		device pci 1c.6 on
-			chip drivers/net
-				register "customized_leds" = "0x05af"
-				register "wake" = "GPE0_DW1_07" # GPP_C7
-				register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)"
-				register "stop_delay_ms" = "12" # NIC needs time to quiesce
-				register "stop_off_delay_ms" = "1"
-				register "has_power_resource" = "1"
-				register "device_index" = "0"
-				device pci 00.0 on end
-			end
-			register "PcieRpSlotImplemented[6]" = "1"
-		end # RTL8111H Ethernet NIC
 		device pci 1d.2 on	# PCI Express Port 11 (X2 NVMe)
 			register "PcieRpSlotImplemented[10]" = "1"
 		end

To view, visit change 46288. To unsubscribe, or for help writing mail filters, visit settings.