2 comments:
File util/autoport/lynxpoint.go:
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 6}, writeEmpty: true, additionalComment: "PCIe Port #7"},
PCISlot{PCIAddr: PCIAddr{Dev: 0x1c, Func: 7}, writeEmpty: true, additionalComment: "PCIe Port #8"},
These only exist on some variants. See int max_root_ports(void) in sb/intel/lynxpoint/pcie.c
RestoreDIRRoute(sb, "D31IR", uint16(inteltool.RCBA[0x3140]))
RestoreDIRRoute(sb, "D29IR", uint16(inteltool.RCBA[0x3144]))
RestoreDIRRoute(sb, "D28IR", uint16(inteltool.RCBA[0x3146]))
RestoreDIRRoute(sb, "D27IR", uint16(inteltool.RCBA[0x3148]))
RestoreDIRRoute(sb, "D26IR", uint16(inteltool.RCBA[0x314c]))
RestoreDIRRoute(sb, "D25IR", uint16(inteltool.RCBA[0x3150]))
RestoreDIRRoute(sb, "D22IR", uint16(inteltool.RCBA[0x315c]))
RestoreDIRRoute(sb, "D20IR", uint16(inteltool.RCBA[0x3160]))
I typically leave this to reset default, or use the defaults on my platform. The ACPI _PRT tables are automatically generated so up to you if you want it here.
To view, visit change 30890. To unsubscribe, or for help writing mail filters, visit settings.