4 comments:
Patch Set #1, Line 13: TEST=Verified pen input operation and pen detection event
Did pen eject work to: […]
1. Show the stylus tools on eject
; Yes
2. Hide the stylus tools on insert
; Yes
3. Wake from pen eject from S0ix and S3 (Did the eventlog have right information?)
; Yes. (Tested on s0ix) But there is no wake source in eventlog. Should we have the wake source in event log?
4. No wake by pen insert from S0ix and S3.
; Yes. (tested on s0ix)
File src/mainboard/google/hatch/variants/kohaku/gpio.c:
Why was this removed? Is it not required anymore?
It was routed to EMR_GARAGE_INT before, but not used.
GPP_C12 would be routed to EN_PP3300_TSP_DX in latest schematics, we need to configure it in another CL for enabling TSP device.
Note: This should be set to 0 if you figure out that the reset GPIO needs to be part of power sequen […]
As our device charger checked with wacom, they said we don't need triggering reset for power sequencing of the IC. When the IC powered on, reset would be triggered internally.
So I think we can keep this signal as high or route to always on power.
INVERT
Done
To view, visit change 34581. To unsubscribe, or for help writing mail filters, visit settings.