Anonymous Coward #1001830 has uploaded this change for review.
mainboard/google/poppy/variants/nautilus - MIPI camera asl files for Nautilus
* added IMX258 sensor entity
* enabled CIO2 and IMGu in devicetree.cb
* On Pre-EVT/EVT the USB and MIPI share the same power source.
* before HW fix, temporarily disabled turn off 3V3_VDD
BUG=b:70644925
BRANCH=Master
TEST=test on Nautilus boards to enable camera pin control by PMIC
Change-Id: Iebd41ac3631829bbb0b008761eb67c3db3e94638
Signed-off-by: andy yeh <andy.yeh@intel.corp-partner.google.com>
---
M src/mainboard/google/poppy/Kconfig
M src/mainboard/google/poppy/variants/nautilus/devicetree.cb
A src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/camera.asl
A src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/ipu_mainboard.asl
A src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/mipi_camera.asl
5 files changed, 656 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/56/23056/1
diff --git a/src/mainboard/google/poppy/Kconfig b/src/mainboard/google/poppy/Kconfig
index 9315d96..1734ac0 100644
--- a/src/mainboard/google/poppy/Kconfig
+++ b/src/mainboard/google/poppy/Kconfig
@@ -136,6 +136,7 @@
select DRIVERS_GENERIC_MAX98357A
select DRIVERS_I2C_DA7219
select DRIVERS_PS2_KEYBOARD
+ select VARIANT_HAS_CAMERA_ACPI
select VARIANT_HAS_I2C_TPM if !VBOOT_MOCK_SECDATA
config VARIANT_SPECIFIC_OPTIONS_SORAKA
diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
index a548ac9..2dfe858 100644
--- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb
@@ -38,8 +38,8 @@
register "XdciEnable" = "0"
register "SsicPortEnable" = "0"
register "SmbusEnable" = "1"
- register "Cio2Enable" = "0"
- register "SaImguEnable" = "0"
+ register "Cio2Enable" = "1"
+ register "SaImguEnable" = "1"
register "ScsEmmcEnabled" = "1"
register "ScsEmmcHs400Enabled" = "1"
register "ScsSdCardEnabled" = "2"
diff --git a/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/camera.asl b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/camera.asl
new file mode 100644
index 0000000..55bd625
--- /dev/null
+++ b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/camera.asl
@@ -0,0 +1,17 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "ipu_mainboard.asl"
+#include "mipi_camera.asl"
diff --git a/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/ipu_mainboard.asl b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/ipu_mainboard.asl
new file mode 100644
index 0000000..2e2b129
--- /dev/null
+++ b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/ipu_mainboard.asl
@@ -0,0 +1,62 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope (\_SB.PCI0.CIO2)
+{
+ /* Define two ports for CIO2 device where endpoint of port0
+ is connected to CAM0 and endpoint of port1 is connected to CAM1 */
+
+ Name (_DSD, Package () {
+ ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "port0", "PRT0" },
+ Package () { "port1", "PRT1" },
+ }
+ })
+
+ Name (PRT0, Package () {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "port", 0 }, /* csi 0 */
+ },
+ ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "endpoint0", "EP00" },
+ }
+ })
+
+ Name (EP00, Package() {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "endpoint", 0 },
+ Package () { "clock-lanes", 0 },
+ Package () { "data-lanes", Package () { 1, 2, 3, 4 } },
+ Package () { "remote-endpoint",
+ Package() { \_SB.PCI0.I2C2.CAM0, 0, 0 }
+ },
+ }
+ })
+
+ Name (PRT1, Package () {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "port", 1 }, /* csi 1 */
+ },
+ ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "endpoint0", "EP10" },
+ }
+ })
+}
diff --git a/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/mipi_camera.asl b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/mipi_camera.asl
new file mode 100644
index 0000000..61fd86c
--- /dev/null
+++ b/src/mainboard/google/poppy/variants/nautilus/include/variant/acpi/mipi_camera.asl
@@ -0,0 +1,574 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope (\_SB.PCI0.I2C2)
+{
+ Device (PMIC)
+ {
+ Name (_HID, "INT3472") /* _HID: Hardware ID */
+ Name (_UID, Zero) /* _UID: Unique ID */
+ Name (_DDN, "TPS68470 PMIC") /* _DDN: DOS Device Name */
+ Name (CAMD, 0x64)
+
+ Method (_STA, 0, NotSerialized) /* _STA: Status */
+ {
+ Return (0x0F)
+ }
+
+ Method (PMON, 0, Serialized) {
+ /*
+ * Turn on 3V3_VDD. It takes around 1 ms for voltage to
+ * settle to 3.3 Volt. Provide additional 2 ms delay.
+ */
+ STXS(EN_PP3300_DX_CAM)
+ Sleep (3)
+ }
+
+ Method (PMOF, 0, Serialized) {
+ /* Make Sure all PMIC outputs are off. */
+ If (LEqual (VSIC, Zero)) {
+ /*
+ * On Pre-EVT/EVT the USB and MIPI share the same power source,
+ * before HW fix, temporarily disabled turn off 3V3_VDD
+ */
+ /* CTXS(EN_PP3300_DX_CAM) */
+ }
+ }
+
+ Name (_PR0, Package (0x01) { CPMC })
+ Name (_PR3, Package (0x01) { CPMC })
+
+ /* Power resource methods for PMIC */
+ PowerResource (CPMC, 0, 0) {
+ Name (RSTO, 1)
+ Method (_ON, 0, Serialized) {
+ PMON()
+ /* Do not reset PMIC across S3 and S0ix cycle */
+ if (Lequal (RSTO, 1)) {
+ CTXS(EN_CAM_PMIC_RST_L)
+ Sleep(1)
+ STXS(EN_CAM_PMIC_RST_L)
+ Sleep (3)
+ RSTO = 0
+ }
+ }
+ Method (_OFF, 0, Serialized) {
+ PMOF()
+ }
+ Method (_STA, 0, Serialized) {
+ Return (GTXS(EN_PP3300_DX_CAM))
+ }
+ }
+
+ /* Marks the availability of all the operation regions */
+ Name (AVBL, Zero)
+ Name (AVGP, Zero)
+ Name (AVB0, Zero)
+ Name (AVB1, Zero)
+ Name (AVB2, Zero)
+ Name (AVB3, Zero)
+ Method (_REG, 2, NotSerialized)
+ {
+ If (LEqual (Arg0, 0x08))
+ {
+ /* Marks the availability of GeneralPurposeIO
+ * 0x08: opregion space for GeneralPurposeIO
+ */
+ Store (Arg1, AVGP)
+ }
+ If (LEqual (Arg0, 0xB0))
+ {
+ /* Marks the availability of
+ * TI_PMIC_POWER_OPREGION_ID */
+ Store (Arg1, AVB0)
+ }
+ If (LEqual (Arg0, 0xB1))
+ {
+ /* Marks the availability of
+ * TI_PMIC_VR_VAL_OPREGION_ID */
+ Store (Arg1, AVB1)
+ }
+ If (LEqual (Arg0, 0xB2))
+ {
+ /* Marks the availability of
+ * TI_PMIC_CLK_OPREGION_ID */
+ Store (Arg1, AVB2)
+ }
+ If (LEqual (Arg0, 0xB3))
+ {
+ /* Marks the availability of
+ * TI_PMIC_CLK_FREQ_OPREGION_ID */
+ Store (Arg1, AVB3)
+ }
+ If (LAnd (AVGP, LAnd (LAnd (AVB0, AVB1),
+ LAnd(AVB2, AVB3))))
+ {
+ /* Marks the availability of all opregions */
+ Store (1, AVBL)
+ }
+ Else
+ {
+ Store (0, AVBL)
+ }
+ }
+
+ OperationRegion (GPOP, GeneralPurposeIo, 0, 0x2)
+ Name (_CRS, ResourceTemplate ()
+ {
+ I2cSerialBus (0x004D, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C2",
+ 0x00, ResourceConsumer, ,
+ )
+ /* GPIO.1 is sensor SDA in daisy chain mode */
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionInputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 1
+ }
+ /* GPIO.2 is sensor SCL in daisy chain mode */
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionInputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 2
+ }
+ /* GPIO.4 is AVDD pin for user facing camera */
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionOutputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 4
+ }
+ /* GPIO.5 is XSHUTDOWN pin for user facing camera */
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionOutputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 5
+ }
+ /* GPIO.9 is XSHUTDOWN pin for world facing camera */
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionOutputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 9
+ }
+ })
+
+ /* PMIC operation regions */
+ /* 0xB0: TI_PMIC_POWER_OPREGION_ID
+ * VSIO: Sensor IO LDO output
+ * VCMC: VCM LDO output
+ * VAX1: Auxiliary LDO1 output
+ * VAX2: Auxiliary LDO2 output
+ * VACT: Analog LDO output
+ * VDCT: Core buck output
+ */
+ OperationRegion (PWR1, 0xB0, Zero, 0x0100)
+ Field (PWR1, DWordAcc, NoLock, Preserve)
+ {
+ VSIO, 32,
+ VCMC, 32,
+ VAX1, 32,
+ VAX2, 32,
+ VACT, 32,
+ VDCT, 32,
+ }
+
+ /* 0xB1: TI_PMIC_VR_VAL_OPREGION_ID
+ * SIOV: VSIO VR voltage value
+ * IOVA: VIO VR voltage value
+ * VCMV: VCM VR voltage value
+ * AX1V: Auxiliary LDO1 VR voltage value
+ * AX2V: Auxiliary LDO2 VR voltage value
+ * ACVA: Analog LDO VR voltage
+ * DCVA: Core buck VR volatage
+ */
+ OperationRegion (PWR2, 0xB1, Zero, 0x0100)
+ Field (PWR2, DWordAcc, NoLock, Preserve)
+ {
+ SIOV, 32,
+ IOVA, 32,
+ VCMV, 32,
+ AX1V, 32,
+ AX2V, 32,
+ ACVA, 32,
+ DCVA, 32,
+ }
+
+ /* 0xB2: TI_PMIC_CLK_OPREGION_ID
+ * PCTL: PLL control register
+ * PCT2: PLL control 2 register
+ * CFG1: Clock configuration 1 register
+ * CFG2: Clock configuration 2 register
+ */
+ OperationRegion (CLKC, 0xB2, Zero, 0x0100)
+ Field (CLKC, DWordAcc, NoLock, Preserve)
+ {
+ PCTL, 32,
+ PCT2, 32,
+ CFG1, 32,
+ CFG2, 32,
+ }
+
+ /* 0xB3: TI_PMIC_CLK_FREQ_OPREGION_ID
+ * PDV2: PLL output divider for HCLK_B
+ * BODI: PLL output divider for boost clock
+ * BUDI: PLL output divider for buck clock
+ * PSWR: PLL reference clock setting
+ * XTDV: Reference crystal divider
+ * PLDV: PLL feedback divider
+ * PODV: PLL output divider for HCLK_A
+ */
+ OperationRegion (CLKF, 0xB3, Zero, 0x0100)
+ Field (CLKF, DWordAcc, NoLock, Preserve)
+ {
+ PDV2, 32,
+ BODI, 32,
+ BUDI, 32,
+ PSWR, 32,
+ XTDV, 32,
+ PLDV, 32,
+ PODV, 32,
+ }
+
+ /* CLE0 and CLE1 are used to determine if both the clocks
+ are enabled or disabled. */
+ Mutex (MUTC, 0)
+ Name (CLE0, 0)
+ Name (CLE1, 0)
+ Method (CLKE, 0, Serialized) {
+ /* save Acquire result so we can check for
+ Mutex acquired */
+ Store (Acquire (MUTC, 1000), Local0)
+ /* check for Mutex acquired */
+ If (LEqual (Local0, Zero)) {
+ /* Enable clocks only when a sensor is turned on and
+ both the clocks are disabled */
+ If (LNot (LOr (CLE0, CLE1))) {
+ /* Set boost clock divider */
+ BODI = 3
+ /* Set buck clock divider */
+ BUDI = 2
+ /* Set the PLL_REF_CLK cyles */
+ PSWR = 19
+ /* Set the reference crystal divider */
+ XTDV = 170
+ /* Set PLL feedback divider */
+ PLDV = 32
+ /* Set PLL output divider for HCLK_A */
+ PODV = 1
+ /* Set PLL output divider for HCLK_B */
+ PDV2 = 1
+ /* Enable clocks for both the sensors
+ * CFG1: output selection for HCLK_A and
+ * HCLK_B.
+ * CFG2: set drive strength for HCLK_A
+ * and HCLK_B.
+ */
+ CFG2 = 5
+ CFG1 = 10
+ /* Enable PLL output, crystal oscillator
+ * input capacitance control and set
+ * Xtal oscillator as clock source.
+ */
+ PCTL = 209
+ Sleep(1)
+ }
+ Release (MUTC)
+ }
+ }
+
+ /* Clocks need to be disabled only if both the sensors are
+ turned off */
+ Method (CLKD, 0, Serialized) {
+ /* save Acquire result so we can check for
+ Mutex acquired */
+ Store (Acquire (MUTC, 1000), Local0)
+ /* check for Mutex acquired */
+ If (LEqual (Local0, Zero)) {
+ If (LNot (LOr (CLE0, CLE1))) {
+ BODI = 0
+ BUDI = 0
+ PSWR = 0
+ XTDV = 0
+ PLDV = 0
+ PODV = 0
+ PDV2 = 0
+ /* Disable clocks for both the
+ sensors */
+ CFG2 = 0
+ CFG1 = 0
+ PCTL = 0
+ }
+ Release (MUTC)
+ }
+ }
+
+ /* Reference count for VSIO */
+ Mutex (MUTV, 0)
+ Name (VSIC, 0)
+ Method (DOVD, 1, Serialized) {
+ /* Save Acquire result so we can check for
+ Mutex acquired */
+ Store (Acquire (MUTV, 1000), Local0)
+ /* Check for Mutex acquired */
+ If (LEqual (Local0, Zero)) {
+ /* Turn off VSIO */
+ If (LEqual (Arg0, Zero)) {
+ /* Decrement only if VSIC > 0 */
+ if (LGreater (VSIC, 0)) {
+ Decrement (VSIC)
+ If (LEqual (VSIC, Zero)) {
+ VSIO = 0
+ Sleep(1)
+ PMOF()
+ }
+ }
+ } ElseIf (LEqual (Arg0, 1)) {
+ /* Increment only if VSIC < 4 */
+ If (LLess (VSIC, 4)) {
+ /* Turn on VSIO */
+ If (LEqual (VSIC, Zero)) {
+ PMON()
+ VSIO = 3
+
+ if (LNotEqual (IOVA, 52)) {
+ /* Set VSIO value as
+ 1.8006 V */
+ IOVA = 52
+ }
+ if (LNotEqual (SIOV, 52)) {
+ /* Set VSIO value as
+ 1.8006 V */
+ SIOV = 52
+ }
+ Sleep(3)
+ }
+ Increment (VSIC)
+ }
+ }
+
+ Release (MUTV)
+ }
+ }
+
+ /* C0GP is used to indicate if CAM0
+ * GPIOs are configured as input.
+ */
+ Name (C0GP, 0)
+ /* Power resource methods for CAM0 */
+ PowerResource (OVTH, 0, 0) {
+ Name (STA, 0)
+ Method (_ON, 0, Serialized) {
+ If (LEqual (AVBL, 1)) {
+ If (LEqual (STA, 0)) {
+ If (LEqual (C0GP, 0)) {
+ \_SB.PCI0.I2C2.CAM0.CGP1()
+ \_SB.PCI0.I2C2.CAM0.CGP2()
+ C0GP = 1
+ }
+
+ /* Enable VSIO regulator +
+ daisy chain */
+ DOVD(1)
+
+ VACT = 1
+ if (LNotEqual (ACVA, 109)) {
+ /* Set ANA at 2.8152V */
+ ACVA = 109
+ }
+ Sleep(3)
+
+ \_SB.PCI0.I2C2.PMIC.CLKE()
+ CLE0 = 1
+
+ VDCT = 1
+ if (LNotEqual (DCVA, 12)) {
+ /* Set CORE at 1.2V */
+ DCVA = 12
+ }
+ Sleep(3)
+ \_SB.PCI0.I2C2.CAM0.CRST(1)
+ Sleep(5)
+
+ STA = 1
+ }
+ }
+ }
+
+ Method (_OFF, 0, Serialized) {
+ If (LEqual (AVBL, 1)) {
+ If (LEqual (STA, 1)) {
+ Sleep(2)
+ CLE0 = 0
+ \_SB.PCI0.I2C2.PMIC.CLKD()
+ Sleep(2)
+ \_SB.PCI0.I2C2.CAM0.CRST(0)
+ Sleep(3)
+ VDCT = 0
+ Sleep(3)
+ VACT = 0
+ Sleep(1)
+ DOVD(0)
+ }
+ }
+ STA = 0
+ }
+ Method (_STA, 0, NotSerialized) {
+ Return (STA)
+ }
+ }
+ }
+
+ Device (CAM0)
+ {
+ Name (_HID, "SONY258A") /* _HID: Hardware ID */
+ Name (_UID, Zero) /* _UID: Unique ID */
+ Name (_DDN, "SONY IMX258 Camera") /* _DDN: DOS Device Name */
+ Name (CAMD, 0x02)
+
+ Method (_STA, 0, NotSerialized) /* _STA: Status */
+ {
+ Return (0x0F)
+ }
+
+ Name (_DEP, Package() { \_SB.PCI0.I2C2.PMIC })
+ Name (_CRS, ResourceTemplate ()
+ {
+ I2cSerialBus (0x001A, ControllerInitiated, 0x00061A80,
+ AddressingMode7Bit, "\\_SB.PCI0.I2C2",
+ 0x00, ResourceConsumer, ,
+ )
+ })
+
+ Field (\_SB.PCI0.I2C2.PMIC.GPOP, ByteAcc, NoLock, Preserve)
+ {
+ Connection
+ (
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionInputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 1
+ }
+ ),
+ GPO1, 1,
+ Connection
+ (
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionInputOnly, "\\_SB.PCI0.I2C2.PMIC",
+ 0x00, ResourceConsumer,,)
+ {
+ 2
+ }
+ ),
+ GPO2, 1,
+ Connection
+ (
+ GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+ IoRestrictionOutputOnly,
+ "\\_SB.PCI0.I2C2.PMIC", 0x00,
+ ResourceConsumer,,)
+ {
+ 9
+ }
+ ),
+ GRST, 1,
+ }
+
+ /* Set or clear GRST GPIO */
+ Method (CRST, 1, Serialized)
+ {
+ GRST = Arg0
+ }
+
+ /* Read GPO1 GPIO, to configure as input */
+ Method (CGP1, 0, Serialized)
+ {
+ Return (GPO1)
+ }
+
+ /* Read GPO2 GPIO, to configure as input */
+ Method (CGP2, 0, Serialized)
+ {
+ Return (GPO2)
+ }
+
+ Name (_PR0, Package () { ^^I2C2.PMIC.OVTH })
+ Name (_PR3, Package () { ^^I2C2.PMIC.OVTH })
+
+ /* Port0 of CAM0 is connected to port0 of CIO2 device */
+ Name (_DSD, Package () {
+ ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "port0", "PRT0" },
+ },
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "clock-frequency", 19200000 },
+ }
+ })
+
+ Name (PRT0, Package() {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "port", 0 },
+ },
+ ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
+ Package () {
+ Package () { "endpoint0", "EP00" },
+ }
+ })
+
+ Name (EP00, Package() {
+ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package () { "endpoint", 0 },
+ Package () { "clock-lanes", 0 },
+ Package () { "data-lanes",
+ Package () { 1, 2, 3, 4 }
+ },
+ Package () { "link-frequencies",
+ Package() { 540000000, 270000000 }
+ },
+ Package () { "remote-endpoint",
+ Package() { \_SB.PCI0.CIO2, 0, 0 }
+ },
+ }
+ })
+
+ Method (SSDB, 0, Serialized)
+ {
+ Return (Buffer (0x5E)
+ {
+ /* 0000 */ 0x00, 0x50, 0x00, 0x00, 0x00, 0x00,0x00, 0x00,
+ /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0010 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0018 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00,
+ /* 0020 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0028 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0030 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0038 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0040 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* 0048 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x03,
+ /* 0050 */ 0x09, 0x00, 0x02, 0x01, 0x00, 0x01, 0x00, 0x36,
+ /* 0058 */ 0x6E, 0x01, 0x00, 0x00, 0x00, 0x00
+ })
+ }
+ }
+}
+
To view, visit change 23056. To unsubscribe, or for help writing mail filters, visit settings.