7 comments:
File Documentation/mainboard/ongy/h61m-s1.md:
- There is no automatic, OS-independent fan control.
The `coretemp` driver can still be used for
accurate CPU temperature readings.
Your board doesn't have a SuperIO, so it doesn't really have this
Patch Set #36, Line 51: - me_cleaner breaks LPC bus and attached components!
I don't think your board has anything on the LPC bus
Patch Set #36, Line 52: - Tianocore payload. The reason is yet undiscovered.
Did you select a linear high-resolution framebuffer under menuconfig --> Devices --> Display ? tianocore needs that
x1
Your board doesn't have a SuperIO, so it doesn't really have this
Patch Set #36, Line 94: https://github.com/skollrc/coreboot_ongy_h61m-s1_port/blob/master/ROM_AND_DOC/Ongy_generic_H61M-S1_manual.pdf
Is this manual available elsewhere?
File Documentation/mainboard/ongy/h61m-s1.png:
This picture is really blurry and very large. It should be about 50 KiB at most
To view, visit change 40813. To unsubscribe, or for help writing mail filters, visit settings.