Matt DeVillier uploaded patch set #2 to this change.

View Change

mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe

Per the schematics, SRCCLKREQ2# is used for the NVMe and should be
enabled. Enable CLKREQ for PCIe RP9, and adjust comments to indicate
correct value used per schematic.

Test: build/boot Librem 15v3 with NVMe drive, verify drive identified
properly and no errors in boot log.

Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I159cb7ce1f5195d95c0229490c3bbde26edbd375
---
M src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb
1 file changed, 2 insertions(+), 2 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/50/40950/2

To view, visit change 40950. To unsubscribe, or for help writing mail filters, visit settings.