Matt DeVillier has uploaded this change for review.
mb/purism/librem_mini: Fix PCIe clock source mapping in devicetree
Correct PCIe clock source mapping in devicetree now that the GPIO
config has been fixed. Move ClkSrcUsage/ClkSrcClkReq registers
under their associated PCIe root ports.
Change-Id: Ibdaba51d971a39a6da6df82652b7420d7324dee5
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
---
M src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
1 file changed, 7 insertions(+), 16 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/21/47221/1
diff --git a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb b/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
index 9fde5e9..267e408 100644
--- a/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
+++ b/src/mainboard/purism/librem_cnl/variants/librem_mini/devicetree.cb
@@ -19,22 +19,6 @@
# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
- # All SRCCLKREQ pins mapped directly
- register "PcieClkSrcClkReq[0]" = "0"
- register "PcieClkSrcClkReq[1]" = "1"
- register "PcieClkSrcClkReq[2]" = "2"
- register "PcieClkSrcClkReq[3]" = "3"
- register "PcieClkSrcClkReq[4]" = "4"
- register "PcieClkSrcClkReq[5]" = "5"
-
- # Set all SRCCLKREQ pins as free-use
- register "PcieClkSrcUsage[0]" = "0x80"
- register "PcieClkSrcUsage[1]" = "0x80"
- register "PcieClkSrcUsage[2]" = "0x80"
- register "PcieClkSrcUsage[3]" = "0x80"
- register "PcieClkSrcUsage[4]" = "0x80"
- register "PcieClkSrcUsage[5]" = "0x80"
-
# Misc
register "AcousticNoiseMitigation" = "1"
@@ -211,6 +195,9 @@
register "PcieRpSlotImplemented[7]" = "1"
register "PcieRpEnable[7]" = "1"
register "PcieRpLtrEnable[7]" = "1"
+ # ClkSrcUsage must be set to free-run or module not detected
+ register "PcieClkSrcUsage[2]" = "0x80"
+ register "PcieClkSrcClkReq[2]" = "2"
smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther"
end
device pci 1d.0 off end # PCI Express Port 9
@@ -218,6 +205,8 @@
device pci 00.0 on end # x1 (LAN)
register "PcieRpSlotImplemented[9]" = "1"
register "PcieRpEnable[9]" = "1"
+ register "PcieClkSrcUsage[3]" = "9"
+ register "PcieClkSrcClkReq[3]" = "3"
end
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
@@ -226,6 +215,8 @@
register "PcieRpSlotImplemented[12]" = "1"
register "PcieRpEnable[12]" = "1"
register "PcieRpLtrEnable[12]" = "1"
+ register "PcieClkSrcUsage[1]" = "12"
+ register "PcieClkSrcClkReq[1]" = "1"
smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280" "SlotDataBusWidth4X"
end
device pci 1d.5 off end # PCI Express Port 14
To view, visit change 47221. To unsubscribe, or for help writing mail filters, visit settings.