1 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.


drivers/spi/acpi: Drop 'disable_gpio_export_in_crs' flag

Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the
OS driver and ACPI thinking they own the GPIO. This can cause timing
problems because it's not clear which system should be controlling the
GPIO.

There's no reason to require explicit disablement however, so drop the
superfluous 'disable' flag, and change the _CRS generation to check if
the GPIOs will be exported via the 'has_power_resource' flag instead.

This mirrors the change made for drivers/i2c/generic.

TEST=untested, as no boards selected this option.

Change-Id: I4f95d0e453d89b7e1978d3efac304518304495d1
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71850
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/drivers/spi/acpi/acpi.c
M src/drivers/spi/acpi/chip.h
2 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/src/drivers/spi/acpi/acpi.c b/src/drivers/spi/acpi/acpi.c
index abebd88..9b6fd80 100644
--- a/src/drivers/spi/acpi/acpi.c
+++ b/src/drivers/spi/acpi/acpi.c
@@ -32,10 +32,10 @@
 {
 	/*
 	 * Return false if:
-	 * 1. Request to explicitly disable export of GPIOs in CRS, or
+	 * 1. GPIOs are exported via a power resource, or
 	 * 2. Both reset and enable GPIOs are not provided.
 	 */
-	if (config->disable_gpio_export_in_crs ||
+	if (config->has_power_resource ||
 	    ((config->reset_gpio.pin_count == 0) &&
 	     (config->enable_gpio.pin_count == 0)))
 		return false;
diff --git a/src/drivers/spi/acpi/chip.h b/src/drivers/spi/acpi/chip.h
index 9849f17..9bee847 100644
--- a/src/drivers/spi/acpi/chip.h
+++ b/src/drivers/spi/acpi/chip.h
@@ -19,9 +19,6 @@
 	/* Use GPIO based interrupt instead of PIRQ */
 	struct acpi_gpio irq_gpio;
 
-	/* Disable reset and enable GPIO export in _CRS */
-	bool disable_gpio_export_in_crs;
-
 	/* Does the device have a power resource? */
 	bool has_power_resource;
 

