Julius Werner submitted this change.
vboot: Remove hard dependency on MISSING_BOARD_RESET
Having a working board reset is certainly better when you're running
vboot (because otherwise you'll hang when transitioning into recovery
mode), but I don't think it should be strictly required, since it's
still somewhat usable without. This is particularly important for
certain test platforms that don't have a good way to reset but might
still be useful for vboot testing/prototyping.
Change-Id: Ia765f54b6e2e176e2d54478fb1e0839d8cab9849
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38417
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
---
M src/security/vboot/Kconfig
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/security/vboot/Kconfig b/src/security/vboot/Kconfig
index 7e86c7c..30b99af 100644
--- a/src/security/vboot/Kconfig
+++ b/src/security/vboot/Kconfig
@@ -28,7 +28,7 @@
default n
select VBOOT_LIB
select VBOOT_MOCK_SECDATA if !TPM1 && !TPM2
- depends on !MISSING_BOARD_RESET
+ depends on 0 = 0 # Must have a 'depends on' or board overrides will break it.
help
Enabling VBOOT will use vboot to verify the components of the firmware
(stages, payload, etc).
To view, visit change 38417. To unsubscribe, or for help writing mail filters, visit settings.