[coreboot-gerrit] Patch set updated for coreboot: soc/intel/fsp_baytrail: convert to using common MP and SMM init

[Aaron Durbin]

Aaron Durbin ([e-mail]) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/14581

-gerrit

commit 2bdef97dbe4f516ff64b5e8a8c55c4e16a8e1b9b
Author: Aaron Durbin 
Date:   Tue May 3 11:31:32 2016 -0500

soc/intel/fsp_baytrail: convert to using common MP and SMM init

In order to reduce duplication of code use the common MP and SMM
    initialization flow.

Change-Id: I709ea938b720f26b351a1f950593efe077edb997
    Signed-off-by: Aaron Durbin 
---
 src/soc/intel/fsp_baytrail/cpu.c | 212 +++++++++++----------------------------
 1 file changed, 59 insertions(+), 153 deletions(-)

diff --git a/src/soc/intel/fsp_baytrail/cpu.c b/src/soc/intel/fsp_baytrail/cpu.c
index 2753f1c..3fba0b7 100644
--- a/src/soc/intel/fsp_baytrail/cpu.c
+++ b/src/soc/intel/fsp_baytrail/cpu.c
@@ -30,30 +30,8 @@
 #include <soc/msr.h>
 #include <soc/pattrs.h>
 #include <soc/ramstage.h>
-#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
 #include <soc/smm.h>

-static void smm_relocate(void);
-static void enable_smis(void);
-
-static struct mp_flight_record mp_steps[] = {
-	MP_FR_BLOCK_APS(smm_relocate, smm_relocate),
-	MP_FR_BLOCK_APS(mp_initialize_cpu, mp_initialize_cpu),
-	/* Wait for APs to finish initialization before proceeding. */
-	MP_FR_BLOCK_APS(NULL, enable_smis),
-};
-#else /* CONFIG_HAVE_SMI_HANDLER */
-static struct mp_flight_record mp_steps[] = {
-	MP_FR_BLOCK_APS(mp_initialize_cpu, mp_initialize_cpu),
-};
-#endif
-
-/* The APIC id space on Bay Trail is sparse. Each id is separated by 2. */
-static int adjust_apic_id(int index, int apic_id)
-{
-	return 2 * index;
-}
-
 /* Core level MSRs */
 static const struct reg_script core_msr_script[] = {
    /* Dynamic L2 shrink enable and threshold */
@@ -64,29 +42,6 @@ static const struct reg_script core_msr_script[] = {
    REG_SCRIPT_END
 };

-void baytrail_init_cpus(device_t dev)
-{
-	struct bus *cpu_bus = dev->link_list;
-	const struct pattrs *pattrs = pattrs_get();
-	struct mp_params mp_params;
-
-	x86_mtrr_check();
-
-	/* Enable the local cpu apics */
-	setup_lapic();
-
-	mp_params.num_cpus = pattrs->num_cpus,
-	mp_params.parallel_microcode_load = 1,
-	mp_params.adjust_apic_id = adjust_apic_id;
-	mp_params.flight_plan = &mp_steps[0];
-	mp_params.num_records = ARRAY_SIZE(mp_steps);
-	mp_params.microcode_pointer = pattrs->microcode_patch;
-
-	if (mp_init(cpu_bus, &mp_params)) {
-		printk(BIOS_ERR, "MP initialization failure.\n");
-	}
-}
-
 static void baytrail_core_init(device_t cpu)
 {
    printk(BIOS_DEBUG, "Init BayTrail core.\n");
@@ -123,9 +78,8 @@ static const struct cpu_driver driver __cpu_driver = {
    .id_table = cpu_table,
 };

-#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
 /*
- * SMM loading and initialization.
+ * MP and SMM loading initialization.
  */

struct smm_relocation_attrs {
@@ -136,98 +90,26 @@ struct smm_relocation_attrs {

static struct smm_relocation_attrs relo_attrs;

-static void adjust_apic_id_map(struct smm_loader_params *smm_params)
+static void pre_mp_init(void)
 {
-	int i;
-	struct smm_runtime *runtime = smm_params->runtime;
-
-	for (i = 0; i < CONFIG_MAX_CPUS; i++)
-		runtime->apic_id_to_cpu[i] = mp_get_apic_id(i);
-}
-
-static void asmlinkage cpu_smm_do_relocation(void *arg)
-{
-	msr_t smrr;
-	em64t100_smm_state_save_area_t *smm_state;
-	const struct smm_module_params *p;
-	const struct smm_runtime *runtime;
-	int cpu;
-
-	p = arg;
-	runtime = p->runtime;
-	cpu = p->cpu;
-
-	if (cpu >= CONFIG_MAX_CPUS) {
-		printk(BIOS_CRIT,
-		       "Invalid CPU number assigned in SMM stub: %d\n", cpu);
-		return;
-	}
-
-	/* Set up SMRR. */
-	smrr.lo = relo_attrs.smrr_base;
-	smrr.hi = 0;
-	wrmsr(SMRR_PHYS_BASE, smrr);
-	smrr.lo = relo_attrs.smrr_mask;
-	smrr.hi = 0;
-	wrmsr(SMRR_PHYS_MASK, smrr);
-
-	/* The relocated handler runs with all CPUs concurrently. Therefore
-	 * stagger the entry points adjusting SMBASE downwards by save state
-	 * size * CPU num. */
-	smm_state = (void *)(SMM_EM64T100_SAVE_STATE_OFFSET + runtime->smbase);
-	smm_state->smbase = relo_attrs.smbase - cpu * runtime->save_state_size;
-	printk(BIOS_DEBUG, "New SMBASE 0x%08x\n", smm_state->smbase);
-}
-
-static int install_relocation_handler(int num_cpus)
-{
-	const int save_state_size = sizeof(em64t100_smm_state_save_area_t);
-
-	struct smm_loader_params smm_params = {
-		.per_cpu_stack_size = save_state_size,
-		.num_concurrent_stacks = num_cpus,
-		.per_cpu_save_state_size = save_state_size,
-		.num_concurrent_save_states = 1,
-		.handler = (smm_handler_t)&cpu_smm_do_relocation,
-	};
-
-	if (smm_setup_relocation_handler(&smm_params))
-		return -1;
-
-	adjust_apic_id_map(&smm_params);
+	x86_mtrr_check();

-	return 0;
+	/* Enable the local cpu apics */
+	setup_lapic();
 }

-static int install_permanent_handler(int num_cpus)
+static int get_cpu_count(void)
 {
-	/* There are num_cpus concurrent stacks and num_cpus concurrent save
-	 * state areas. Lastly, set the stack size to the save state size. */
-	int save_state_size = sizeof(em64t100_smm_state_save_area_t);
-	struct smm_loader_params smm_params = {
-		.per_cpu_stack_size = save_state_size,
-		.num_concurrent_stacks = num_cpus,
-		.per_cpu_save_state_size = save_state_size,
-		.num_concurrent_save_states = num_cpus,
-	};
-	const int tseg_size = smm_region_size() - CONFIG_SMM_RESERVED_SIZE;
-
-	printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n",
-	       relo_attrs.smbase);
-
-	if (smm_load_module((void *)relo_attrs.smbase, tseg_size, &smm_params))
-		return -1;
-
-	adjust_apic_id_map(&smm_params);
+	const struct pattrs *pattrs = pattrs_get();

-	return 0;
+	return pattrs->num_cpus;
 }

-static int smm_load_handlers(void)
+static void get_smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
+				size_t *smm_save_state_size)
 {
    /* All range registers are aligned to 4KiB */
    const uint32_t rmask = ~((1 << 12) - 1);
-	const struct pattrs *pattrs = pattrs_get();

/* Initialize global tracking state. */
    relo_attrs.smbase = (uint32_t)smm_region_start();
@@ -235,41 +117,65 @@ static int smm_load_handlers(void)
    relo_attrs.smrr_mask = ~(smm_region_size() - 1) & rmask;
    relo_attrs.smrr_mask |= MTRR_PHYS_MASK_VALID;

-	/* Install handlers. */
-	if (install_relocation_handler(pattrs->num_cpus) < 0) {
-		printk(BIOS_ERR, "Unable to install SMM relocation handler.\n");
-		return -1;
-	}
+	*perm_smbase = relo_attrs.smbase;
+	*perm_smsize = smm_region_size() - CONFIG_SMM_RESERVED_SIZE;
+	*smm_save_state_size = sizeof(em64t100_smm_state_save_area_t);
+}

-	if (install_permanent_handler(pattrs->num_cpus) < 0) {
-		printk(BIOS_ERR, "Unable to install SMM permanent handler.\n");
-		return -1;
-	}
+/* The APIC id space on Bay Trail is sparse. Each id is separated by 2. */
+static int adjust_apic_id(int index, int apic_id)
+{
+	return 2 * index;
+}

-	/* Ensure the SMM handlers hit DRAM before performing first SMI. */
-	wbinvd();
+static void get_microcode_info(const void **microcode, int *parallel)
+{
+	const struct pattrs *pattrs = pattrs_get();

-	return 0;
+	*microcode = pattrs->microcode_patch;
+	*parallel = 1;
 }

-static void smm_relocate(void)
+static void relocation_handler(int cpu, uintptr_t curr_smbase,
+				uintptr_t staggered_smbase)
 {
+	msr_t smrr;
+	em64t100_smm_state_save_area_t *smm_state;

-	/* Load relocation and permanent handler. */
-	if (boot_cpu()) {
-		if (smm_load_handlers() < 0) {
-			printk(BIOS_ERR, "Error loading SMM handlers.\n");
-			return;
-		}
-		southcluster_smm_clear_state();
-	}
+	/* Set up SMRR. */
+	smrr.lo = relo_attrs.smrr_base;
+	smrr.hi = 0;
+	wrmsr(SMRR_PHYS_BASE, smrr);
+	smrr.lo = relo_attrs.smrr_mask;
+	smrr.hi = 0;
+	wrmsr(SMRR_PHYS_MASK, smrr);

-	/* Relocate SMM space. */
-	smm_initiate_relocation();
+	smm_state = (void *)(SMM_EM64T100_SAVE_STATE_OFFSET + curr_smbase);
+	smm_state->smbase = staggered_smbase;
 }

static void enable_smis(void)
 {
-	southcluster_smm_enable_smi();
+	if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER))
+		southcluster_smm_enable_smi();
+}
+
+static const struct mp_ops mp_ops = {
+	.pre_mp_init = pre_mp_init,
+	.get_cpu_count = get_cpu_count,
+	.get_smm_info = get_smm_info,
+	.get_microcode_info = get_microcode_info,
+	.adjust_cpu_apic_entry = adjust_apic_id,
+	.pre_mp_smm_init = southcluster_smm_clear_state,
+	.relocation_handler = relocation_handler,
+	.post_mp_init = enable_smis,
+};
+
+void baytrail_init_cpus(device_t dev)
+{
+	struct bus *cpu_bus = dev->link_list;
+
+	if (mp_init_with_smm(cpu_bus, &mp_ops)) {
+		printk(BIOS_ERR, "MP initialization failure.\n");
+	}
 }
-#endif