David Wu has uploaded this change for review.
mb/google/volteer/var/voxel: Add Raydium touchscreen support
Enable the Raydium touchscreen support
BUG=b:157402209
BRANCH=master
TEST= 1. emerge-volteer coreboot chromeos-bootimage
2. boot up on voxel DUT and make sure the raydium TS can work.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I377aded4982ece71f4dabb58f307f68c713edcd2
---
M src/mainboard/google/volteer/variants/voxel/overridetree.cb
1 file changed, 14 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/55/44055/1
diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb
index 2219de0..43296d5 100644
--- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb
@@ -63,6 +63,20 @@
register "hid_desc_reg_offset" = "0x01"
device i2c 10 on end
end
+ chip drivers/i2c/generic
+ register "hid" = ""RAYD0001""
+ register "desc" = ""Raydium Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+ register "probed" = "1"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+ register "reset_delay_ms" = "1"
+ register "reset_off_delay_ms" = "2"
+ register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+ register "enable_delay_ms" = "10"
+ register "enable_off_delay_ms" = "1"
+ register "has_power_resource" = "1"
+ device i2c 39 on end
+ end
end # I2C1 0xA0E9
device pci 15.2 on
chip drivers/i2c/sx9310
To view, visit change 44055. To unsubscribe, or for help writing mail filters, visit settings.