Attention is currently required from: Federico Amedeo Izzo.

Federico Amedeo Izzo uploaded patch set #9 to this change.

View Change

The following approvals got outdated and were removed: Verified+1 by build bot (Jenkins)

mb/aoostar: Add AOOSTAR R1 (WTR_R1)

AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with
two 3.5" HDD slots, an M.2 NVMe 2280 SSD slot and a single DDR4 SODIMM
slot. It also comes with 2x 2.5Gb Intel NICs, Intel AX200 WiFi + BT
and USB-C Alt-DP Power Delivery.

Working:
- Automatic FAN control (IT8613E SuperIO)
- M.2 NVME slot
- 2x SATA ports (Issue on 3.5" HDD, see below)
- USB 2.0 ports
- USB 3.0 ports
- USB-C port with Alt-DP and PD
- HDMI / DisplayPort ports
- 2x 2.5Gb NICs
- WiFi + BT
- MicroSD card reader
- ASPM (Unavailable on stock)
- Linux/Windows UEFI booting with EDK2

Broken:
- Power button (OFF->ON broken, ON->OFF works)
- 3.5" SATA HDDs (Detected only after reboot)

Untested:
- Internal audio
- S3

My motivation for doing this port is enabling ASPM, as it makes a
great difference on idle power consumption (from 8.4W to 5W measured
from the wall).

The last remaining annoyance of this port is the power button not
working. I spent a few hours double checking the SuperIO registers but
then I gave up. A workaround for this is to use the "ON after power
loss" feature and reconnect the power cord to turn on the board.
It's not a big problem for a NAS that will stay ON 24/7.
Any hint on the power button or 3.5" HDD issue is welcome.

VBT extracted from vendor BIOS.
Compiled with FSP GOP video initialization, using IFD descriptor
and ME blob extracted from vendor BIOS.

The board can be flashed externally using a 1.8V adapter, I used a
CH341a modded for 3.3V I/O.
Internal flashing works, as flash is not read/write protected.

Patchset 5: Re-enabled dptf, added default options to Kconfig.
Patchset 7: Configured USB port mapping and overcurrent, USB3.0 works
Patchset 8: Fixed microSD card reader

Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
---
A src/mainboard/aoostar/Kconfig
A src/mainboard/aoostar/Kconfig.name
A src/mainboard/aoostar/wtr_r1/Kconfig
A src/mainboard/aoostar/wtr_r1/Kconfig.name
A src/mainboard/aoostar/wtr_r1/Makefile.mk
A src/mainboard/aoostar/wtr_r1/board_info.txt
A src/mainboard/aoostar/wtr_r1/bootblock.c
A src/mainboard/aoostar/wtr_r1/data.vbt
A src/mainboard/aoostar/wtr_r1/devicetree.cb
A src/mainboard/aoostar/wtr_r1/dsdt.asl
A src/mainboard/aoostar/wtr_r1/gpio.h
A src/mainboard/aoostar/wtr_r1/romstage_fsp_params.c
12 files changed, 723 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/10/82010/9

To view, visit change 82010. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-Project: coreboot
Gerrit-Branch: main
Gerrit-Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5
Gerrit-Change-Number: 82010
Gerrit-PatchSet: 9
Gerrit-Owner: Federico Amedeo Izzo <federico@izzo.pro>
Gerrit-Reviewer: build bot (Jenkins) <no-reply@coreboot.org>
Gerrit-CC: Angel Pons <th3fanbus@gmail.com>
Gerrit-CC: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Gerrit-Attention: Federico Amedeo Izzo <federico@izzo.pro>
Gerrit-MessageType: newpatchset