2 comments:
mb/google/volteer/variants/eldrid: disable Fan Performance Control
and Passive Policy
Please keep subject line to 72 chars; I suggest: […]
Done
File src/mainboard/google/volteer/variants/eldrid/overridetree.cb:
device pci 04.0 on
# DPTF Policy for Eldrid board
chip drivers/intel/dptf
## Active Policy
register "policies.active" = "{
[0] = {.target = DPTF_CPU,
.thresholds = {TEMP_PCT(85, 90),
TEMP_PCT(80, 69),
TEMP_PCT(75, 56),
TEMP_PCT(70, 46),
TEMP_PCT(65, 36),}},
[1] = {.target = DPTF_TEMP_SENSOR_0,
.thresholds = {TEMP_PCT(50, 90),
TEMP_PCT(47, 69),
TEMP_PCT(45, 56),
TEMP_PCT(42, 46),
TEMP_PCT(39, 36),}},
[2] = {.target = DPTF_TEMP_SENSOR_1,
.thresholds = {TEMP_PCT(50, 90),
TEMP_PCT(47, 69),
TEMP_PCT(45, 56),
TEMP_PCT(42, 46),
TEMP_PCT(39, 36),}},
[3] = {.target = DPTF_TEMP_SENSOR_2,
.thresholds = {TEMP_PCT(50, 90),
TEMP_PCT(47, 69),
TEMP_PCT(45, 56),
TEMP_PCT(42, 46),
TEMP_PCT(39, 36),}},
[4] = {.target = DPTF_TEMP_SENSOR_3,
.thresholds = {TEMP_PCT(50, 90),
TEMP_PCT(47, 69),
TEMP_PCT(45, 56),
TEMP_PCT(42, 46),
TEMP_PCT(39, 36),}}}"
## Critical Policy
register "policies.critical" = "{
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN),
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 75, SHUTDOWN),
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 75, SHUTDOWN),
[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 75, SHUTDOWN)}"
## Power Limits Control
# 10-15W PL1 in 200mW increments, avg over 28-32s interval
# PL2 is fixed at 64W, avg over 28-32s interval
register "controls.power_limits" = "{
.pl1 = {.min_power = 3000,
.max_power = 15000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 200,},
.pl2 = {.min_power = 15000,
.max_power = 60000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 1000,}}"
## Charger Performance Control (Control, mA)
register "controls.charger_perf" = "{
[0] = { 255, 1700 },
[1] = { 24, 1500 },
[2] = { 16, 1000 },
[3] = { 8, 500 }}"
device generic 0 on end
end
end
I don't think this isn't doing what you're expecting here. […]
Done
To view, visit change 45860. To unsubscribe, or for help writing mail filters, visit settings.