14 comments:
1.make a folder advantech in mainboard .
2.change vendor name in Kconfig.name files accordingly.
3.copy folder intle/d945gclf in advantech folder.
rename folder with som4461
4.In som4461/kconfig.name change board name to som4461
5.In som4461/kconfig , change existing superio to select
SUPERIO_WINBOND_W83627DHG
This looks good.
6.In som4461/devicetree.cb change existing chip to
chip superio/winbond/w83627dhg
Have the values on this devicetree section been changed according to superiotool?
Patch Set #1, Line 29: 8.Change romstage.c , include winbond.h and w83627dhg.h
The SuperIO code in romstage.c is SuperIO-specific.
Patch Set #1, Line 32: >donot include microcode,
Why?
File src/mainboard/advantech/som4461/Kconfig:
Patch Set #1, Line 26: select HAVE_PIRQ_TABLE
This option refers to mainboard-specific code you have here. If you have not changed irq_tables.c, comment this entry out for now.
Patch Set #1, Line 30: BOARD_ROMSIZE_KB_512
Is this size correct? I see 8 Mbit on a document, which would be 1024 KB.
File src/mainboard/advantech/som4461/acpi/ec.asl:
Does your mainboard have an Embedded Controller?
File src/mainboard/advantech/som4461/acpi/superio.asl:
Check this file on src/mainboard/asus/p5qpl-am/acpi
File src/mainboard/advantech/som4461/board_info.txt:
Really?
File src/mainboard/advantech/som4461/devicetree.cb:
Patch Set #1, Line 27: subsystemid 0x8086 0x464c inherit
This should be the subsystemid of your mainboard. Check with `lspci -nnv`
Patch Set #1, Line 48: 0x20000601
This comes from inteltool
Patch Set #1, Line 57: device pci 1b.0 on end # High Definition Audio
Check `lspci -nntv` to make sure you are enabling the devices your mainboard uses, if not done already.
File src/mainboard/advantech/som4461/mptable.c:
This is mainboard-specific, and probably not needed for now.
File src/mainboard/advantech/som4461/romstage.c:
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
Please insert a newline before and after these lines
To view, visit change 30977. To unsubscribe, or for help writing mail filters, visit settings.