[coreboot-gerrit] Change in coreboot[master]: mainboard/google/fizz: Tune i2c parameters

[Shelley Chen (Code Review)]

Shelley Chen has uploaded this change for review. ( https://review.coreboot.org/21773

Change subject: mainboard/google/fizz: Tune i2c parameters
......................................................................

mainboard/google/fizz: Tune i2c parameters

Tune I2C params for I2C buses 1 and 5 to ensure that the
frequency does not exceed 400KHz.

BUG=b:65058277
BRANCH=None
TEST=Measured bus frequency for audio and cr50 <= 400MHz

Change-Id: Ia82d47916958e4c199b80a845977b79c4057ac81
Signed-off-by: Shelley Chen 
---
M src/mainboard/google/fizz/devicetree.cb
1 file changed, 19 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/73/21773/1

diff --git a/src/mainboard/google/fizz/devicetree.cb b/src/mainboard/google/fizz/devicetree.cb
index 3989ec4..3590d6e 100644
--- a/src/mainboard/google/fizz/devicetree.cb
+++ b/src/mainboard/google/fizz/devicetree.cb
@@ -220,7 +220,25 @@
    # Configure I2C1 for cr50 TPM. Early init is required to set up a BAR
    # for TPM communication before memory is up.
    register "i2c[1]" = "{
-		 .early_init = 1,
+		.speed = I2C_SPEED_FAST,
+		.speed_config[0] = {
+			.speed = I2C_SPEED_FAST,
+			.scl_lcnt = 156,
+			.scl_hcnt = 139,
+			.sda_hold = 36,
+		},
+		.early_init = 1,
+	}"
+
+	# audio
+	register "i2c[5]" = "{
+		.speed = I2C_SPEED_FAST,
+		.speed_config[0] = {
+			.speed = I2C_SPEED_FAST,
+			.scl_lcnt = 156,
+			.scl_hcnt = 139,
+			.sda_hold = 36,
+		},
    }"

# Must leave UART0 enabled or SD/eMMC will not work as PCI