Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/4408
-gerrit
commit 8f533aea29a59d5d7c91a09e21525aef497c4934 Author: Duncan Laurie dlaurie@chromium.org Date: Tue Jul 30 15:58:18 2013 -0700
lynxpoint: Fix issues with XHCI init
- Put the device into D0 and not D3 so memory bar is available and the subsequent commands actually do something useful - Remove set of 818Ch[7:0]=FFh (gone in ref code) - Fix reg 0x40/0x44 mixup
Verify that expected bits are set: localhost ~ # pci_read32 0 0x14 0 0x10 0xe0500004 localhost ~ # mmio_read32 0xe0508144 0x000003ff localhost ~ # mmio_read32 0xe050816c 0x000f0038
Change-Id: I388398e8c7d11e538ca18dab55d8bbd9b88f17df Signed-off-by: Duncan Laurie dlaurie@chromium.org Reviewed-on: https://gerrit.chromium.org/gerrit/63801 Reviewed-by: Aaron Durbin adurbin@chromium.org --- src/southbridge/intel/lynxpoint/usb_xhci.c | 39 +++++++++++++----------------- 1 file changed, 17 insertions(+), 22 deletions(-)
diff --git a/src/southbridge/intel/lynxpoint/usb_xhci.c b/src/southbridge/intel/lynxpoint/usb_xhci.c index dbf0f40..f866c4f 100644 --- a/src/southbridge/intel/lynxpoint/usb_xhci.c +++ b/src/southbridge/intel/lynxpoint/usb_xhci.c @@ -235,6 +235,7 @@ void usb_xhci_route_all(void) static void usb_xhci_clock_gating(device_t dev) { u32 reg32; + u16 reg16;
/* IOBP 0xE5004001[7:6] = 11b */ pch_iobp_update(0xe5004001, ~0, (1 << 7)|(1 << 6)); @@ -258,9 +259,9 @@ static void usb_xhci_clock_gating(device_t dev) pci_write_config8(dev, 0x40 + 2, (u8)((reg32 >> 16) & 0xff));
/* D20:F0:44h[9,7,3] = 111b */ - reg32 = pci_read_config32(dev, 0x44); - reg32 |= (1 << 9) | (1 << 7) | (1 << 3); - pci_write_config32(dev, 0x44, reg32); + reg16 = pci_read_config16(dev, 0x44); + reg16 |= (1 << 9) | (1 << 7) | (1 << 3); + pci_write_config16(dev, 0x44, reg16);
reg32 = pci_read_config32(dev, 0xa0); if (pch_is_lp()) { @@ -323,21 +324,20 @@ static void usb_xhci_enable_ports_usb3(device_t dev)
static void usb_xhci_init(device_t dev) { - struct resource *bar0 = find_resource(dev, PCI_BASE_ADDRESS_0); u32 reg32; + u16 reg16; + u32 mem_base = usb_xhci_mem_base(dev);
- if (!bar0 || bar0->base == 0 || bar0->base == 0xffffffff) - return; + /* D20:F0:74h[1:0] = 00b (set D0 state) */ + reg16 = pci_read_config16(dev, XHCI_PWR_CTL_STS); + reg16 &= ~PWR_CTL_SET_MASK; + reg16 |= PWR_CTL_SET_D0; + pci_write_config16(dev, XHCI_PWR_CTL_STS, reg16);
/* Enable clock gating first */ usb_xhci_clock_gating(dev);
- /* D20:F0:74h[1:0] = 11b (set D3Hot state) */ - reg32 = pci_read_config16(dev, 0x74); - reg32 |= (1 << 1) | (1 << 0); - pci_write_config16(dev, 0x74, reg32); - - reg32 = read32(bar0->base + 0x8144); + reg32 = read32(mem_base + 0x8144); if (pch_is_lp()) { /* XHCIBAR + 8144h[8,7,6] = 111b */ reg32 |= (1 << 8) | (1 << 7) | (1 << 6); @@ -346,25 +346,20 @@ static void usb_xhci_init(device_t dev) reg32 &= ~((1 << 7) | (1 << 6)); reg32 |= (1 << 8); } - write32(bar0->base + 0x8144, reg32); + write32(mem_base + 0x8144, reg32);
if (pch_is_lp()) { /* XHCIBAR + 816Ch[19:0] = 000f0038h */ - reg32 = read32(bar0->base + 0x816c); + reg32 = read32(mem_base + 0x816c); reg32 &= ~0x000fffff; reg32 |= 0x000f0038; - write32(bar0->base + 0x816c, reg32); + write32(mem_base + 0x816c, reg32);
/* D20:F0:B0h[17,14,13] = 100b */ reg32 = pci_read_config32(dev, 0xb0); reg32 &= ~((1 << 14) | (1 << 13)); reg32 |= (1 << 17); pci_write_config32(dev, 0xb0, reg32); - - /* XHCIBAR + 818Ch[7:0] = FFh */ - reg32 = read32(bar0->base + 0x818c); - reg32 |= 0xff; - write32(bar0->base + 0x818c, reg32); }
reg32 = pci_read_config32(dev, 0x50); @@ -380,9 +375,9 @@ static void usb_xhci_init(device_t dev) pci_write_config32(dev, 0x50, reg32);
/* D20:F0:44h[31] = 1 (Access Control Bit) */ - reg32 = pci_read_config32(dev, 0x40); + reg32 = pci_read_config32(dev, 0x44); reg32 |= (1 << 31); - pci_write_config32(dev, 0x40, reg32); + pci_write_config32(dev, 0x44, reg32);
/* D20:F0:40h[31,23] = 10b (OC Configuration Done) */ reg32 = pci_read_config32(dev, 0x40);