3 comments:
File src/mainboard/purism/librem_cnl/variants/librem_mini/gpio.c:
/* GPD2 - NC */
PAD_NC(GPD2, NONE),
but I do - R332 is not populated
Done
/* GPP_C6 - NC */
PAD_NC(GPP_C6, NONE),
/* GPP_C7 - NC */
PAD_NC(GPP_C7, NONE),
look closer ;) R126 and R130 are not populated
aaand vendor had NC, too
/* GPP_E15 - NC */
PAD_NC(GPP_E15, NONE),
yup, because R324 is not populated; can you verify that on the board, please?
no markings on the board for resistors 😞
however, even vendor didn't have SCI configured, but GPO, while SMC_EXTSMI# would be an input. Setting GPO probably was done to prevent floating -> *should* be nc
To view, visit change 47191. To unsubscribe, or for help writing mail filters, visit settings.