View Change

1 comment:

• File src/superio/ite/it8613e/superio.c:

  • Patch Set #4, Line 74: 0x0fff

    I've rechecked it, those are correct according to specification. […]

    I checked the IT8772E datasheet and there the simple I/O BAR is 8 bytes long:
    "The accessed I/O ports are programmable and are eight consecutive I/O ports (Base Address+0, Base Address+1, Base Address+2, Base Address+3, Base Address+4, Base Address+5). Base Address is programmed on the registers of GPIO Simple I/O Base Address LSB and MSB registers (LDN=07h,
    Index=62h and 63h)."
    This is however not mentioned in the table with the sizes of the different I/O BARs of the SIO.

To view, visit change 31617. To unsubscribe, or for help writing mail filters, visit settings.