Angel Pons has uploaded this change for review.

View Change

soc/intel/cmn/graphics: Make DDI-A 4 lanes configurable

As described in Intel document 336464 (8th gen S series datasheet volume
1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up
with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2
lanes. This lets mainboards provide a VGA output without sacrificing one
of the main 4-lane DDIs. Newer platforms seem to be lacking this.

However, the way this is structured in coreboot does not allow boards to
choose whether bifurcation should be enabled. Most boards in the tree do
not use DDI-E (it doesn't exist on mobile platforms), but there are some
boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to
provide a VGA output.

Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options
to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to
specify whether a platform supports DDI-A bifurcation at all (do nothing
otherwise, maintaining the original code's behaviour). If bifurcation is
supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear
or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register.

Change-Id: I516538db77509209d371f3f49c920476e06b052f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
---
M src/soc/intel/cannonlake/Kconfig
M src/soc/intel/common/block/graphics/Kconfig
M src/soc/intel/common/block/graphics/graphics.c
M src/soc/intel/skylake/Kconfig
4 files changed, 31 insertions(+), 10 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/82113/1
diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig
index 7548e46..3aa06f4 100644
--- a/src/soc/intel/cannonlake/Kconfig
+++ b/src/soc/intel/cannonlake/Kconfig
@@ -64,7 +64,7 @@
select SOC_INTEL_COMMON_NHLT
select SOC_INTEL_COMMON_PCH_CLIENT
select SOC_INTEL_COMMON_RESET
- select SOC_INTEL_CONFIGURE_DDI_A_4_LANES
+ select SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION
select SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION
select SSE2
select SUPPORT_CPU_UCODE_IN_CBFS
diff --git a/src/soc/intel/common/block/graphics/Kconfig b/src/soc/intel/common/block/graphics/Kconfig
index b5776b0..eaa429e 100644
--- a/src/soc/intel/common/block/graphics/Kconfig
+++ b/src/soc/intel/common/block/graphics/Kconfig
@@ -8,10 +8,20 @@

if SOC_INTEL_COMMON_BLOCK_GRAPHICS

-config SOC_INTEL_CONFIGURE_DDI_A_4_LANES
+config SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION
bool
help
- Selected by platforms that require DDI-A bifurcation setup.
+ Skylake, Kaby Lake and Coffee Lake desktop CPUs support eDP
+ bifurcation, i.e. 4 eDP lanes get split between DDI-A (eDP)
+ and DDI-E (DP, used for VGA). Selected from SoC Kconfig, if
+ applicable.
+
+config SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION
+ bool
+ depends on SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION
+ help
+ Selected by mainboards that use DDI-E, which is most commonly
+ used to drive a DP-to-VGA adapter to provide a VGA connector.

config SOC_INTEL_DISABLE_IGD
bool "Disable Integrated GFX Controller (0:2:0)"
diff --git a/src/soc/intel/common/block/graphics/graphics.c b/src/soc/intel/common/block/graphics/graphics.c
index eabcb9a..151d38b 100644
--- a/src/soc/intel/common/block/graphics/graphics.c
+++ b/src/soc/intel/common/block/graphics/graphics.c
@@ -124,6 +124,21 @@
return graphics_get_framebuffer_address() && get_external_display_status();
}

+static void configure_ddi_a_bifurcation(void)
+{
+ u32 ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A);
+ /* Only program if the buffer is not enabled yet. */
+ if (ddi_buf_ctl & DDI_BUF_CTL_ENABLE)
+ return;
+
+ if (CONFIG(SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION))
+ ddi_buf_ctl &= ~DDI_A_4_LANES;
+ else
+ ddi_buf_ctl |= DDI_A_4_LANES;
+
+ graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl);
+}
+
static void gma_init(struct device *const dev)
{
intel_gma_init_igd_opregion();
@@ -135,12 +150,8 @@
if (!CONFIG(RUN_FSP_GOP))
graphics_soc_panel_init(dev);

- if (CONFIG(SOC_INTEL_CONFIGURE_DDI_A_4_LANES) && !acpi_is_wakeup_s3()) {
- const u32 ddi_buf_ctl = graphics_gtt_read(DDI_BUF_CTL_A);
- /* Only program if the buffer is not enabled yet. */
- if (!(ddi_buf_ctl & DDI_BUF_CTL_ENABLE))
- graphics_gtt_write(DDI_BUF_CTL_A, ddi_buf_ctl | DDI_A_4_LANES);
- }
+ if (CONFIG(SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION) && !acpi_is_wakeup_s3())
+ configure_ddi_a_bifurcation();

/*
* GFX PEIM module inside FSP binary is taking care of graphics
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index 0d38804..3ec84ab 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -62,7 +62,7 @@
select SOC_INTEL_COMMON_NHLT
select SOC_INTEL_COMMON_RESET
select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT
- select SOC_INTEL_CONFIGURE_DDI_A_4_LANES
+ select SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION
select SSE2
select SUPPORT_CPU_UCODE_IN_CBFS
select TSC_MONOTONIC_TIMER

To view, visit change 82113. To unsubscribe, or for help writing mail filters, visit settings.

Gerrit-Project: coreboot
Gerrit-Branch: main
Gerrit-Change-Id: I516538db77509209d371f3f49c920476e06b052f
Gerrit-Change-Number: 82113
Gerrit-PatchSet: 1
Gerrit-Owner: Angel Pons <th3fanbus@gmail.com>
Gerrit-MessageType: newchange